AKG LC 617 User manual

LC 617 Mounting
LC 617
LC 617 Positioning Cleaning
Read carefully before use
Download cutsheet with technical details from:
For CE certificates contact: [email protected]
www.akg.com
01/17/5079105_A
Adapter Mounting
QUICK
START
GUIDE
• To clean the microphone
surface, use a soft cloth
moistened with water.
• Clean the foam
windscreen in mild soap
suds. You can use
the windscreen again as
soon as it has dried.

Europe:
AKG Acoustics GmbH
Laxenburger Strasse 254
A1230 Vienna - AUSTRIA
Tel.: [phone]
[email protected]
USA:
AKG Acoustics, U.S.
8500 Balboa Blvd. Dock 15
Northridge, CA 91329, USA
Tel.: [phone]
akgusa[email protected]
1. When scrapping the equipment, separate the case, circuit boards and cables and dispose all
components in accordance with local waste disposal rules.
2. The packaging of the equipment is recyclable. Dispose packaging in an appropriate container.
provided by the local waste collection/ recycling entity and observe all local legislation relating
to waste disposal environment and recycling
Trouble Shooting
Problem Possible Reason How to Solve
No Sound: 1. Power to mixer and/or 1. Switch power to mixer or
amplifier is off. amplifier on.
2. Channel or master fader 2. Set channel or master
on mixer, or volume fader on mixer or volume
control on amplifier is at control on amplifier
zero. to desired lev el.
3. Microphone is not connected 3. Connect microphone to
to mixer or amplifier. mixer or amplifier.
4. Cable connectors are 4. Check cable connectors
seated loosely. for secure seat.
5. Cable is defective. 5. Check cable and
replace if damaged.
6. No supply voltage. 6. Switch phantom power on
6a. Check cable and replace if
necessary.
Distortion: 1. Gain control on the 1. Turn gain control down CCW.
mixer set too high.
2. Mixer input in overload 2. Connect a 10-dB preattenuation
pad between microphone and mixer
Also read the transmitter and receiver manuals!