AL-KO Powerline 5200BRV User manual

BENZINRASENMÄHER
POWERLINE
Betriebsanleitung
INFORMATION I MANUALS I SERVICE
QUALITY FOR LIFE
Garden + Hobby
474 130_a I 01/2011
GB
F
I
SLO
DK
N
PL
SK
LV
D
NL
E
H
HR
S
FIN
CZ
EST
RO
LT
RUS
UA
P
BG
GR
TR
SRB
MK

Original-Betriebsanleitung
2
Benzin-Rasenmäher Powerline
© Copyright 2009
AL-KO KOBER GROUP Kötz, Germany
This documentation is allowed to-also in excerpts-only with express authorization of the AL-KO KOBER GROUP duplicates or third
accessible is done. Technical alterations of inuence of the function reservations.

Original-Betriebsanleitung
4
Benzin-Rasenmäher Powerline
6
5
4
3
2
1
2
3
1
6
7
54321
2
1
2
1
6
7
54321
3
12
3 4
5 6
ab
7 8

5474130_a
2
1
1
22
109
11 12
13 14
15 16
11
START
1
2
1

Original-Betriebsanleitung
6
Benzin-Rasenmäher Powerline
Briggs & Stratton
Tecumseh, Honda, AL-KO
17 18
19 20
21 22
23 24
1
2

7474130_a
25 26
27 28

GB
Translation of original user instructions
20
Petrol lawnmower
Contents
About this handbook .................................................... 22
Product description ...................................................... 22
Safety and protection devices ..................................... 22
Safety instructions ....................................................... 24
Assembly ..................................................................... 25
Fuelling ........................................................................ 25
Initial startup ................................................................ 26
Starting electrically (optional) ...................................... 28
Maintenance and care ................................................. 30
Repairs ........................................................................ 31
Storage ........................................................................ 31
Disposal ....................................................................... 31
EC declaration of conformity ....................................... 31
Faults and remedies .................................................... 32
Warranty ...................................................................... 33
About this handbook
Read through these operating instructions before
starting up the machine. This is a prerequisite for
safe and trouble-free working. Before use, familiar-
ize yourself with the control elements and the cor-
rect use of the machine.
You should save these instructions, and also pass
them on to any subsequent users.
Observe the safety and warning signs on the
machine.
Pictogram description
Caution!
Strict following of these warning alerts can
prevent injury to persons and/or materials.
Special information for better understanding and
handling.
The camera symbol refers to illustrations
Product description
This document describes various models of petrol
lawnmowers. Some models are equipped with a grass
catcher and/or are suitable for mulching.
Please identify your particular model in the product
illustrations and descriptions of the various options.
Proper use
This equipment is intended for moving lawns on private
property and should be used on dry grass only.
Use for any other purpose is considered improper use.
Incorrect use
This lawnmower is not suitable for use in public
spaces, parks, sports grounds, farming or forestry
Safety devices must not be removed or bypassed
Do not use the equipment on damp grass, or if it is
raining
The equipment is intended for domestic use only
Safety and protection devices
Caution - Risk of injury!
Safety/protection devices should not be disabled!
Safety brake handle
The lawnmower is equipped with a safety brake.
Release the brake handle if there is an immediate
danger.
Lawnmower without blade coupling:
Mower blade is stopped
Motor is stopped
Lawnmower with blade coupling:
Mower blade is stopped
Motor continues running
Deector plate
The deector plate provides protection against any
projectiles thrown up.

GB
21474130_a
1 Starter cable 9 Cutting height adjustment*
2 Start, stop* 10 Blade coupling*
3 Wheel drive* 11 Vario transmission*
4 Safety brake handle 12 Operating instructions
5 Ergonomic height adjustment* 13 Outlet shaft insert*
6 Fill level indicator* 14 Cover ap*
7 Deector plate* 15 Mulch kit*
8 Grass catcher* 16 Ignition switch for electric start
17 Quick guide
Symbols on the device
Caution!
Be particularly careful when handling. Remove the spark plug connector before working on the cutting gear.
Before initial startup read the instructions for use! Quick guide
Release the motor brake.
Keep other people out of the danger area! Quick guide
Switch on the wheel drive.
Keep hands and feet away from the cutting gear! Quick guide
Remote throttle control Start / Stop.
Keep away from the danger area.
11 2
10
16
2
17

GB
Translation of original user instructions
22
Petrol lawnmower
Safety instructions
Caution!
Use the equipment only if it is in correct operating
condition!
Caution - Risk of injury!
Safety/protection devices should not be disabled!
Caution - risk of re!
After fuelling, do not store the machine in
buildings where the petrol fumes might come into
contact with naked ames or sparks!
Keep the area around the motor, exhaust, battery
case, and fuel tank clear of grass cuttings, petrol
and oil.
Keep other people out of the danger area
The machine operator or user is responsible for any
accidents affecting other people or their property
Children, or any persons who have not read these
operating instructions, should not be allowed to use
this machine
Follow the local regulations regarding the minimum
age for operators of this type of machine
Do not use the equipment if under the inuence of
alcohol, drugs or medication
Wear appropriate work clothes
Long trousers
Hard, non-slip shoes
Hearing protection
If working on slopes
always make sure you are positioned securely
always work across the slope, never upward
or downward
do not work on slopes where the gradient is
greater than 20°
Take particular care when turning
Only use the lawnmower if there is sufcient
daylight or articial lighting
Keep the body, limbs and clothing away from the
cutting gear
Follow the hours of use regulations applying in the
country concerned
Do not leave the equipment unattended when ready
to operate
Only use the lawnmower if the mower blade is sharp
Do not operate the equipment if the safety devices /
protective grilles are damaged
Never operate the equipment if the safety devices
are not fully assembled (e.g. deector plate, grass
catching devices)
Before each use, check the equipment for damage;
replace any damaged parts before using again
Switch off the motor, wait for the equipment to
come to a standstill, then pull out the spark plug
connector
if leaving the equipment unattended
if a fault has occurred
before clearing blockages
before removing obstructions
if the lawnmower has run into foreign objects
if malfunctions or unusual vibrations occur on
the machine
Check the lawnmower for damage, and carry out
the necessary repairs before restarting or using
the lawnmower again.
Insert the spark plug connector and start the motor
after correcting the fault (see Faults table) and
checking the equipment
after cleaning the equipment
Carefully check the ground to be mowed, and
remove any foreign objects
Take particular care when turning the lawnmower
around, or if pulling it towards you
Do not mow over obstacles
(such as branches, tree roots)
Additional symbols on lawnmowers with
Electrostart
Caution! Risk of electric shock.
Keep the connection line away from the mower
blades.
If the cable is damaged, or when carrying out
maintenance work, always disconnect the
equipment from the mains supply.

GB
23474130_a
Remove cuttings only when the motor has stopped
Switch off the motor / mower blade when passing
over areas other than those that have to be mowed
Never lift or carry the equipment while the motor is
running
Do not eat or drink when topping up the petrol or
motor oil
Do not inhale the petrol fumes
Move the machine at walking speed
Before use, ensure that all nuts, screws and bolts
are securely fastened.
Assembly
Follow the accompanying assembly instructions.
Caution!
The equipment can be used only after complete
assembly.
Fuelling
Fill the lawnmower with fuel before the initial startup.
Warning - risk of re!
Petrol and oil are highly inammable!
Always observe the operating instructions sup-
plied by the motor manufacturer.
Operating uids
Petrol Motor oil
Grade Regular petrol /
unleaded Refer to the motor manufacturer's
instructions
Filling
capacity
Refer to the motor
manufacturer's
instructions
about 0.6 l
Safety
Warning!
Never leave a motor running in an enclosed
space. Toxic hazard!

Store petrol and oil only in containers intended for
this purpose
Only add or drain oil in the open air, and when the
motor has cooled down
Do not add petrol or oil while the motor is running
Do not overll the tank (petrol expands)
Do not smoke when refuelling
Do not open the tank lock when the motor is
running or when hot
Replace the tank or tank lock if damaged
Always close the tank cap rmly
If petrol has been spilt:
Do not start the motor
Do not start the equipment
Clean the equipment
If motor oil has been spilled:
Do not start the motor
Soak up the spilled oil with an oil binding agent
and dispose of appropriately
Clean the equipment
Used oil should not be:
disposed of with domestic rubbish
poured into the sewage system, drains, or
onto the ground
We recommend to collect the used oil in a closed
container and to deliver it to a suitable recycling or
service station.
Adding petrol
1. Unscrew the tank cap, and keep in a clean place.
2. Pour in petrol using a funnel.
3. Firmly replace the cap on the ller opening and
clean it.
Adding motor oil
1. Unscrew the ller cap, and keep in a clean place.
2. Pour in oil using a funnel.
3. Firmly replace the cap on the ller opening and
clean it.

GB
Translation of original user instructions
24
Petrol lawnmower
Mowing with the grass catcher
Caution - Risk of injury!
Attach/detach the grass catcher only when the
motor is switched off and the mower blade has
come to a standstill.
1. Lift the deector plate and insert the grass catcher
in the holders ( 6).
Fill level indicator
The ll level indicator is pushed upward by the air ow
when mowing ( 5a).
If the grass catcher is full, the indicator points to the box
( 5b). The grass catcher must be emptied.
Emptying the grass catcher
1. Lift the deector plate.
2. Unhook the grass catcher and pull backward to
remove ( 6).
3. Empty the grass catcher.
4. Lift the deector plate and insert the grass catcher
in the holders ( 6).
Initial startup
Caution!
The equipment should not be used if the cutting
gear and/or fastenings are loose, damaged or
worn.
Carry out a visual inspection before each start-
up.
The camera symbol on the following page refers
to the illustrations on Page 4–7.
Adjusting the cutting height
Caution - Risk of injury!
Adjust the cutting height only with the motor
switched off and when the mower blade has
come to a standstill.
▪ Always set all the wheels to the same cutting
height.
▪ Cutting height adjustment depends on the
particular model.
Central adjustment ( 1)
1. Press and hold the central height adjustment knob
( 1/1).
For shorter grass, press the central adjustment
handle downward ( 1/2)
For longer grass, pull the central adjustment
handle upward ( 1/2)
The central height adjustment level is indicated
( 1/3)
2. Release the knob at the desired cutting height.
Axle adjustment or central adjustment ( 2, 3)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
axle adjustment ( 4)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
Mowing without the grass catcher
Caution!
Only work without the grass catcher if the
deector plate torsion spring is working correctly.
The deector plate is held to the mower housing by
spring force. This causes the mowed grass to be thrown
backward and downward.

GB
25474130_a
Mulching with the mulch kit (optional)
When mulching, the grass cuttings are not collected, but
are left on the lawn. The grass mulch prevents the soil
from drying out, and supplies it with nutrients.
The best results are obtained by cutting back regularly
by about 2 cm. Only young grass with a soft leaf texture
decomposes quickly.
Grass height before mulching: 8 cm maximum
Grass height after mulching: 4 cm minimum
Adapt your walking pace to the mulching process,
do not walk too fast.
Inserting the mulch kit
Caution - Risk of injury!
Insert/remove the mulch kit only with the motor
switched off and when the mower blade has come
to a standstill.
1. Remove the grass catcher ( 6).
2. Lift the deector plate and insert the mulch kit in the
outlet shaft ( 7).
It must lock into place.
If the mulch kit is not locked into position, both the
mulch kit and the mower blade may be damaged.
Removing the mulch kit
1. Lift the deector plate.
2. Release the lock on the mulch kit ( 8/1).
3. Pull out the mulch kit ( 8/2).
Mowing with the side outlet duct (optional)
Caution - risk of injury!
Attach/detach the side outlet only when the motor
is switched off and the mower blade has come to
a standstill.
Inserting the side outlet
1. Remove the grass catcher and insert the mulch kit.
2. Fold up the side outlet cover and hold it ( 9/1).
3. Insert the side outlet duct ( 9/2).
4. Slowly close the cover.
The cover holds the side outlet duct and prevents
it falling out.
Removing the side outlet
1. Fold up the side outlet cover and hold it ( 9/1).
2. Remove the side outlet and close the cover
( 9/2).
Setting the handle height (optional)
Clamp adjustment
1. Hold the bar and loosen both clamps ( 10).
2. Move the bar to the desired position
3. Lock the clamps.

GB
Translation of original user instructions
26
Petrol lawnmower
Starting the motor
Caution - risk of poisoning!
Never leave a motor running in an enclosed
space.
Caution - Risk of injury!
Do not tilt the lawnmower while starting.
▪ Start the motor only when the blade is mounted
(the blade acts as a ywheel mass)
▪ If starting the motor when hot do NOT use the
choke or primer button
▪ Do not change the motor controller settings
Do not start the equipment if the outlet shaft is not
covered by one of the following parts:
Grass catcher
Deector plate
Mulch kit
Be particularly careful when operating the starter
switch - follow the manufacturer's instructions
Keep your feet at a safe distance from the cutting
gear
Start the lawnmower where the grass is shorter
hold it ( 16) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind ( 17).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between min and max.
with remote throttle control, with primer ( 16)
1. Set the throttle lever to position max ( 12/1).
2. Press the primer button 3 times at intervals of about
2 seconds ( 15). If the temperature is below
10 °C, press the primer button 5 times.
3. Pull in the safety brake handle on the handlebar and
hold it ( 16) - the brake handle does not lock.
4. Pull out the starter cord sharply, then allow it to
slowly rewind ( 17).
5. As soon as the motor starts running, set the throttle
lever for the desired motor rpm, at a position
between min and max.
Starting electrically (optional)
Electrostart with primer ( 13)
1. Set the throttle lever to the "START" position
( 13/1).
2. Press the primer button 3 times at intervals of about
2 seconds ( 15). If the temperature is below
10 °C, press the primer button 5 times.
3. Pull in the safety brake handle on the handlebar and
hold it ( 16) – the brake handle does not lock.
4. Turn the ignition key fully to the right in the ignition
lock ( 18).
5. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
6. According to the desired motor speed, set the
throttle lever to a position between min and
max.
Starting manually
with remote throttle control, with choke
1. Set the throttle lever to position max
( 11/1).
2. Pull in the safety brake handle on the handlebar and
hold it ( 16) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind ( 17).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between min and max.
with remote throttle control, without primer/choke
1. Set the throttle lever to position max ( 12/1).
2. Pull in the safety brake handle on the handlebar and

GB
27474130_a
Blade coupling (optional)
With the blade coupling, the mower blade can be
engaged or disengaged while the motor is running.
Engaging the blade coupling
1. Pull in the safety brake handle on the handlebar
and hold it ( 16) - The brake handle does not
lock.
2. Push the coupling lever away from you ( 14/1)
- The blade coupling is engaged.
Disengaging the blade coupling.
3. Release the safety brake handle ( 22).
- The blade coupling is disengaged.
- The coupling lever moves to rest position ( 14/2).
Electrostart without primer/choke ( 13)
1. Set the throttle lever to the "START" position
( 13/1).
2. Pull in the safety brake handle on the handlebar and
hold it ( 16) – the brake handle does not lock.
3. Turn the ignition key fully to the right in the ignition
lock ( 18).
4. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
5. According to the desired motor speed, set the
throttle lever to a position between min and
max.
Turn the motor off
Lawnmower without blade coupling
1. Set the throttle lever to position min ( 12/2).
2. Release the safety brake handle ( 22).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Lawnmower with blade coupling
1. Release the safety brake handle ( 25).
2. Set the throttle lever to position min ( 12/2).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Wheel drive (optional) ( 20)
Caution!
Engage the transmission only when the motor is
running.
Switching on the wheel drive
1. Press the transmission control handle against the
handlebar and hold it ( 19) – the transmission
control handle does not lock.
- The wheel drive is switched on.
Switching off the wheel drive
1. Release the transmission control handle ( 21).
- The wheel drive is switched off.
Vario transmission (Speed Control) (optional)
The Vario transmission allows continuous variation of the
ground speed of the lawnmower.
Caution!
Operate the lever only when the motor is running.
Operating the lever without the motor drive may
damage the drive mechanism.
To increase the speed, pull the lever ( 20)
towards ( 20/2)
To lower the speed, pull the lever ( 20) towards
( 20/1)
Always adjust the ground speed to suit the current
ground and lawn conditions.

GB
Translation of original user instructions
28
Petrol lawnmower
Maintenance and care
Caution - Risk of injury!
▪ Before carrying our any care or maintenance
work, always switch off the motor and pull out
the spark plug connector.
▪ The motor may continue running. After switching
off, make sure the motor has stopped turning.
▪ Always wear working gloves when carrying out
maintenance or repair work.
Check the grass catcher regularly for wear, and to
ensure it is working correctly
Clean the equipment after each use
Do not wash the equipment by hosing or spraying
with water
Water inltration can cause faults (in the ignition
system, carburettor)
Check the mower blade regularly for damage
Always replace the mufer if faulty
Tilting the lawnmower
Depending on the motor manufacturer:
the carburettor / air lter must be facing upward
( 23)
the spark plug must be facing upward ( 24)
Follow the operating instructions of the motor
manufacturer!
Resharpening/replacing the mower blade
Blunt or damaged blades should be
resharpened / replaced only at a service point or by
an authorised specialist
Resharpened blades must be rebalanced
Caution!
Blades that have not been rebalanced can cause
serious vibrations, and may result in damage to
the lawnmower.
Charging the starter battery (optional)
The starter battery is maintenance-free and is normally
charged by the lawnmower.
In certain cases, however, the battery will need to be
charged by the user:
Before the initial start-up of the lawnmower
If discharged, before the winter season, or if left
unused for long periods (> 6 months)
Charging procedure:
1. Take the battery charger out of the battery box.
2. Disconnect the battery cable from the motor cable
( 25).
3. Connect the battery cable with the charger cable
( 26).
4. Connect the charger to the mains supply.
The mains voltage must match the operating
voltage of the charger.
The required charging time is about 36 hours.
Use only the original battery charger supplied.
Caution!
▪ Charge the starter battery only in dry, well-
ventilated rooms.
▪ Do not start up the lawnmower while the battery
is charging.
Care of the motor
Changing the motor oil
1. Have a suitable container ready to collect the used
oil.
2. Drain or suction off all the oil through the oil ller
opening.
Dispose of used motor oil in a manner that is
compatible with the environment!
We recommend to collect the used oil in a closed
container and to deliver it to a suitable recycling
or service station.
Used oil should not be
▪ disposed of with domestic rubbish
▪ poured into the sewage system or drains
▪ poured out onto the ground

GB
29474130_a
Wheel drive (optional)
Adjusting the Bowden cable
If the wheel drive can no longer be switched on or off
while the motor- is running, the related Bowden cable
needs to be adjusted.
Caution!
Adjust the Bowden cable only when the motor is
switched off.
1. Turn the adjuster on the Bowden cable in the
direction of the arrow ( 27).
2. To test the cable setting, switch on the motor and
switch on the wheel drive.
3. If the wheel drive is still not working, the lawnmower
must be taken to a service point or an authorised
specialist.
Changing the air lter
Follow the instructions of the manufacturer of the
motor.
Changing the spark plug
Follow the instructions of the manufacturer of the
motor.
Lubricating the drive pinion
From time to time, lubricate the drive pinion on the
transmission shaft
The wheel drive gearing is maintenance free.
Storage
Caution - risk of explosion!
Do not store the equipment where there are
naked ames or heat sources.
Allow the motor to cool down
To save storage space, fold the handlebar down
( 28)
Store the equipment in an area which is kept dry,
and which cannot be accessed by children or
unauthorised persons
Store the starter battery where it will be protected
from frost
Recharge the starter battery from time to time
Drain the fuel tank
Pull out the spark plug connector
Repairs
Repairs should be carried out only by a service point or
an authorised specialist.
Disposal
Do not dispose of old equipment,
batteries or accumulators as household
waste!
Machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
accordingly.
Always have the equipment checked out by a pro-
fessional in the following cases:
after bumping against an obstacle
if the motor stops suddenly
if there is damage to the transmission
if the V-belt is faulty
if the blade is bent
if there is warping of the motor shaft
EC declaration of conformity
see assembly instructions

GB
Translation of original user instructions
30
Petrol lawnmower
Faults and remedies
Caution!
The motor shaft and mower blade should not be aligned.
Fault Solution
The motor does not start ▪ Add petrol
▪ Set throttle lever to "Start"
▪ Switch on the choke
▪ Press the motor switch at the handlebar
▪ Check the spark plugs and replace if necessary.
▪ Clean the air lter.
▪ Spin the mower blade
▪ Recharge the starter battery
▪ Start on a surface already mowed
Motor power reduced ▪ Adjust the cutting height
▪ Resharpen / replace the mower blade
▪ Clean the outlet shaft/housing
▪ Clean the air lter.
▪ Reduce the working speed
Lawnmower cuts unevenly ▪ Resharpen/replace the mower blade
▪ Adjust the cutting height
Grass catcher does not ll
sufciently ▪ Adjust the cutting height
▪ Allow the lawn to dry
▪ Resharpen/replace the mower blade
▪ Clear the grille on the grass catcher
▪ Clean the outlet shaft/housing
Wheel drive does not work ▪ Adjust the Bowden cable
▪ V-belt faulty
▪ Contact the service-workshop
▪ Clean any dirt away from the wheel drive, toothed belt and gearing
▪ Lubricate the freewheels (drive pinion on drive shaft) with spray oil
Wheels do not turn when the
transmission is switched on ▪ Retighten the wheel bolts
▪ Wheel hub faulty
▪ V-belt faulty
▪ Contact the service-workshop
Unusually strong vibrations in
the lawnmower ▪ Check the mower blade
For faults not listed in this table, or which you cannot resolve by yourself, please contact our customer service.

GB
31474130_a
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either
repair or replace the equipment, whichever we consider the more appropriate. This statutory period may vary
according to the legislation in force in the country where the equipment was purchased.
Our warranty is valid only if: The warranty is no longer valid if:
The equipment has been used properly
The operating instructions have been followed
Genuine replacement parts have been used
The equipment has been tampered with
Technical modications have been made
The equipment was not used for its intended purpose
(for example, used for commercial or communal
applications)
The following are not covered by warranty:
Paint damage due to normal wear
Wear parts identied by a border XXX XXX (X) on the spare parts list
Combustion motors – these are covered by a separate warranty from the manufacturer concerned
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest
authorised customer service centre. This warranty does not affect the usual statutory rights of the customer relative to
the seller.
┌──────┐
└──────┘

AL-KO Geraete GmbH l Head Quarter l Ichenhauser Str. 14 l 89359 Koetz l Deutschland
Telefon: [phone] l Telefax: (+49)8221/203 -138 l www.al-ko.com Januar 2011
Country Company Telephone Fax
A AL-KO Kober Ges.m.b.H. (+43)3578 / 2 515227 (+43)3578 / 2515 38
AUS AL-KO International PTY. LTD (+61) 3 / 9767- 3700 (+61) 3 / 9767- 3799
B / L Eurogarden NV (+32)16 / 80 54 27 (+32)16 /80 54 25
BG Valerii S&M Group SJ ([phone] ([phone]
CH AL-KO Kober AG (+41) 56 /418 3150 (+41) 56/418 3160
CZ AL-KO Kober Spol.sr.o. (+420) 3 82 / 2103 81 (+420) 3 82 / 212782
D AL-KO Geräte GmbH (+49) 8221/ 2 03 - 0 (+49) 82 21/ 2 03 -138
DK AL-KO Ginge A/S ([phone] ([phone]
EST/LT/LV AL-KO Kober SIA ([phone] ([phone]
F AL-KO S.A.S. (+33) 3 / 85 -763540 (+33) 3 / 85 -763588
GB Rochford Garden Machinery Ltd. (+44)19 63 / 82 80 50 (+44)19 63 / 828052
H AL-KO KFT (+36)29 / 53 70 50 (+36)29/537051
HR Brun.ko.-prom d.o.o. ([phone] ([phone]
I AL-KO Kober GmbH / SRL (+39) 0 39/ 9 329311 (+39) 0 39/ 9 3293 90
IN AGRO-COMMERCIAL ([phone] ([phone]
IQ Gulistan Com ([phone]
IRL Cyril Johnston & Co. Ltd. ([phone] ([phone]
LY ASHOFAN FOR AGRICULT. ACC. ([phone] ([phone]
MA BADRA Sarl ([phone] ([phone]
MK Techno Geneks ([phone] ([phone]
N AL-KO GINGE A/S ([phone] ([phone]
NL O.DE LEEUW GROENTECHNIEK (+31)38/ 444 6160 (+31)38/ 444 6358
PL AL-KO Kober z.o.o. (+48) 61/ 816 19 25 (+48) 61/ 816 19 80
RO OMNITECH Technology SRL ([phone] ([phone]
RUS OOO AL-KO Kober (+7) 499/ 168 8718 (+7) 499/96600-00
RUS AL-KO St. Petersburg GmbH (+7) 812 / 4 46 10 75 (+7) 812 /4 46 10 75
S AL-KO Ginge Svenska AB ([phone] ([phone]
SK AL-KO Kober Slovakia Spol.s.r.o. (+421) 2 / 45 99 4112 (+421) 2 /45 64 8117
SLO Darko Opara s.p. ([phone] ([phone]
SRB Agromarket d.o.o. ([phone] ([phone]
TR ZIMAS A.S. ([phone] ([phone]
UA TOV AL-KO Kober (+380) 44 /492 33 96 (+380) 44 /4 92 33 97