ALC AWS3377 User manual

7” Touch Screen Wireless
Surveillance System
Wireless Made Simple.
Wireless Video Surveillance System
User Guide
Please read these instructions completely
before operating this product.
AWS3377: 2 Camera System
AWS337: 1 Camera System
Model AWS3377/AWS337

— 1 —
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .............................................................................3
INTRODUCTION..................................................................................................................6
System Contents ...............................................................................................................6
Getting to Know Your LCD Touch Screen Monitor.............................................................7
Getting to Know Your Camera...........................................................................................8
INSTALLATION....................................................................................................................9
Installation Tips ................................................................................................................. 9
Night Vision .......................................................................................................................9
Setting Up the Monitor.....................................................................................................10
Installing the Camera(s)....................................................................................................12
SYSTEM INTRODUCTION................................................................................................14
Live Screen and Menu .....................................................................................................14
Description of Icons .........................................................................................................15
Live Screen Displays........................................................................................................17
Camera Views .................................................................................................................18
Adjusting the Volume.......................................................................................................19
Recording Live Video.......................................................................................................20
MAIN MENU ......................................................................................................................21
Camera Pairing................................................................................................................22
Turning a Camera On or Off.............................................................................................23
Setting HD Option ...........................................................................................................24
Setting the Image Quality.................................................................................................25
Schedule Recording ........................................................................................................26
Motion and Mask Options................................................................................................28
Detection Options............................................................................................................29
Event List.........................................................................................................................30
To Delete a Recording .....................................................................................................32
To Copy a Recording.......................................................................................................33
Setting the Date/Time ......................................................................................................34
Setting the Language.......................................................................................................35
Setting the Image Appearance.........................................................................................36
Setting the Idle Display ....................................................................................................37
Setting the Power Savings...............................................................................................38
Setting the Storage..........................................................................................................39
Formatting a Drive ...........................................................................................................40
Setting the Security Code and Internet Info......................................................................41
System Info and Upgrading .............................................................................................42
REMOTE ACCESS ........................................................................................................... 43
Overview..........................................................................................................................43
Requirements for Remote View........................................................................................43
Downloading the WDVR App...........................................................................................43
WDVR Android Setup Wizard ..........................................................................................44
WDVR Apple Setup Wizard..............................................................................................46

— 2 —
TABLE OF CONTENTS
Android-WDVR Main Screen and Icons ...........................................................................48
Android-Recording ..........................................................................................................49
Android-Event List ...........................................................................................................51
Android-Camera Pairing ..................................................................................................54
Android-Turning a Camera On of Off ...............................................................................55
Android-Setting HD Option ..............................................................................................56
Android-Setting the Image Quality....................................................................................57
Android-Schedule Recording...........................................................................................58
Android-Motion and Motion Area Options........................................................................60
Android-Detection Options ..............................................................................................61
Android-Setting the Date/Time.........................................................................................62
Android-Setting the Language .........................................................................................63
Android-Setting the Image Appearance ...........................................................................64
Android-Setting the Idle Display .......................................................................................65
Android-Setting the Power Savings .................................................................................66
Android-Setting the Security Code and Internet Info ........................................................67
Android-Setting the Storage ............................................................................................68
Android-Formatting a Drive..............................................................................................69
Android-System Info ........................................................................................................70
Android-Setting the Push Setting.....................................................................................71
Apple-WDVR Main Screen and Icons...............................................................................72
Apple-Recording..............................................................................................................73
Apple-Event List ..............................................................................................................75
Apple-Camera Pairing......................................................................................................78
Apple-Turning a Camera On of Off...................................................................................79
Apple-Setting HD Option .................................................................................................80
Apple-Setting the Image Quality.......................................................................................81
Apple-Schedule Recording ..............................................................................................82
Apple-Motion and Motion Area Options ...........................................................................84
Apple-Detection Options..................................................................................................85
Apple-Setting the Date/Time............................................................................................86
Apple-Setting the Image Appearance ..............................................................................87
Apple-Setting the Idle Display ..........................................................................................88
Apple-Setting the Power Savings.....................................................................................89
Apple-Setting the Push Setting ........................................................................................90
Apple-Setting the Storage................................................................................................91
Apple-Formatting a Drive .................................................................................................92
Apple-Setting the Security Code and Internet Info............................................................93
Apple-System Info ...........................................................................................................94
MAINTENANCE................................................................................................................ 95
TROUBLESHOOTING ...................................................................................................... 96
PRODUCT SPECIFICATIONS.......................................................................................... 98
WARRANTY...................................................................................................................... 99

— 3 —
— 2 —
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock do not remove cover (or
back). No user serviceable parts inside. Refer servicing to qualied service
personnel.
DANGEROUS VOLTAGE: The lightning ash with arrowhead, within an
equilateral triangle, is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock topersons.
ATTENTION: The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage
Directive (73/23/EEC); R&TTE(1999/5/EC); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance with these directives implies conformity
to the following European Norms:
EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328
PRODUCT SAFETY: When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety. Improper use of this product can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to
Part 15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television equipment reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Move the equipment away from the monitor.
• Plug the equipment into an outlet on a circuit different from that to which the monitor is connected.
• Consult the dealer or an experienced radio/television technician for additional suggestions.
CAUTION: Any changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.

— 4 —
IMPORTANT SERVICE SAFETY INSTRUCTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
1. Read and Follow Instructions - All the safety and operating instructions should be read before the
product is operated. Follow all operating instructions.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the product and in the operating instructions.
4. Power Sources - This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supplied to your location, consult your
video dealer or local power company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
5. Overloading - Do not overload wall outlets or extension cords as this can result in the risk of re or
electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked
wire insulation, and broken plugs are dangerous. They may result in a shock or re hazard. Periodically
examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced
by your service technician.
6. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
7. Surge Protectors - It is highly recommended that the video equipment be connected to a surge
protector. Doing so will protect the equipment from damage caused by power surges. Surge
protectors should bear the UL listing mark or CSA certication mark.
Recycling and Disposal Information:
• Do not dispose of electronic devices or any of their components (especially
batteries and LCD displays) in your municipal trash collection.
• Consult your local waste management authority or a recycling organization like
Earth911.com to nd an electronics recycling facility in your area.
CAUTION: Rechargeable batteries must be recycled or disposed of properly.
Lithium-Polymer Battery Warning
• This equipment contains a rechargeable lithium-polymer battery.
• Do not charge the battery in temperatures below 32° F (0° C) or higher than 113° F (45° C).
• Do not open or mutilate the battery.
• The rechargeable batteries contained in this equipment may explode if disposed of in a re.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery pack used in this equipment with any charger other than the
one designed to charge this battery pack as specied in the owner’s manual. Using another charger
may damage the battery pack or cause the battery pack to explode.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from
cribs, bassinets, play yards, and other safe sleep environments for infants.

— 5 —
— 4 —
IMPORTANT SAFETY INSTRUCTIONS
8. Uninterruptible Power Supplies (UPS) - Because this product is designed for continuous, 24/7
operation, it is recommended that you connect the product to an uninterruptible power supply. An
uninterruptible power supply has an internal battery that will keep the product running in the event of a
power outage. Uninterruptible power supplies should bear the UL listing mark or CSA certication mark.
CAUTION: Maintain electrical safety. Power line operated equipment or accessories connected to this
product should bear the UL listing mark or CSA certication mark on the accessory itself and should not be
modied so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or
re. If in doubt, contact qualied service personnel.
9. Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the product manufacturer’s instructions have been followed.
10. Attachments - Do not use attachments unless recommended by the product manufacturer as they
may cause a hazard.
11. Water and Moisture - Do not use receivers or video monitors near water — for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a swimming pool and the like.
12. Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including ampliers) that produce heat.
13. Accessories - Do not place this video equipment on an unstable cart, stand, tripod, or table. The
video equipment may fall, causing serious damage to the product. Use this product only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions and use a mounting accessory
recommended by the manufacturer.
14. Camera Extension Cables - Check the rating of your extension cable(s) to verify compliance with your
local authority regulations prior to installation.
15. Mounting - The cameras provided with this system should be mounted only as instructed in this guide
or the instructions that came with your cameras, using the provided mounting brackets.
16. Camera Installation - Cameras are not intended for submersion in water. Not all cameras can be
installed outdoors. Check your camera’s environmental rating to conrm if it can be installed outdoors.
When installing cameras outdoors, installation in a sheltered area is recommended.

— 6 —
Antennas x 3 (x 2) Screw/Anchor Kit x2 (x 1) Quick Start Guide
INTRODUCTION
System Contents
After unpacking, you will have the following items:
Camera x 2 (AWS3377)
Camera x 1 (AWS337)
AC Adapter x 3 (x 2)Ethernet Cable x 1
Monitor x 1
Camera Bracket x 2 (x 1)
Front cover
BACK cover FO LD
FO LD
FO LD
Wireless Made Simple.
REMOTE RECORDING/VIEWING
RECORDING
1
2Tap one or more cameras/channels to record.
Tap Done/OK.
The unit will record the selected cameras/channels. To stop
recording, repeat steps 1 and 2 to turn the respective switches off.
ANDROID: Tap then tap Record ON/OFF.
3
APPLE: Tap the Record icon.
VIEWING
1
2Tap the selected drive to view, i.e. SD Card.
Tap a camera/channels to view its
recordings. Then tap a date and then tap
the time and the video will start playing
back. Control the video as follows:
 Tap to rapidly advance the playback.
Tap to play back the recording.
Tap to pause the playback.
Tap to rapidly rewind the playback.
ANDROID: Tap then tap Playback.
3
APPLE: Tap the Event icon.
Phillips head screwdriver or drill
may be required for installation
7”Touch screen
Monitor
(1-2) Screw/Anchor Kit
x3
7”
IN THE BOX
Let’s Get Started
Model AWS3377/AWS337
7”Touch Screen Monitor Camera
NOTE: Avoid installing in a location which requires the wireless
signal to pass through cement, concrete and metal structures. This
will reduce the transmission range.
For detailed installation and setup, please refer to the Model
AWS3377/AWS337 complete User’s Guide available on our
website: www.ALCWireless.com/support
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
ALCWireless.com
Wireless
Made Simple.
Quick Simple
Set Up
Tools
NOTE: Do not submerge in water or use monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords.
Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce
the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary.
For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support
7" Connected
Touch Screen Wireless
Surveillance System
Remote Monitoring Anytime fromAnywhere
QUICK START GUIDE
Models AWS3377/AWS337
PAIRING ADDITIONAL
CAMERAS TO MONITOR
The AWS3377/AWS337 Wireless Surveillance System supports
up to four (4) wireless surveillance cameras. Use the following
steps to pair each additional camera.
MONITOR SETUP
ACpower cable IncludedEthernet Cable
InternetRouter (not included)
MONITOR SETUP
1
24
3
Connect the AC/DC adapter to the power input on the side of
the Monitor and plug into an electrical outlet.
Connect the network cable from the rear of the unit to your
router. Screw Antenna clockwise into rear of camera and put
into the upright position. Rotate and pull out the stand.
The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR
on the Monitor.
To prepare for RECORDING, insert a microSD card provided into
the microSD card slot on side of the Monitor. MostmicroSD card
brands are supported up to 128 GB.
On-screen Display
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is
recommended to install camera under shelter to protect from direct exposure to
sunlight and other environmental elements. Avoid pointing a camera directly at any
bushes or tree branches or objects that may naturally move due to winds.
x3 x4
EXPANDABLE up to 4 cameras
Ask your retailer for accessory cameras
compatible with this system.
1 2
Secure the multi-position
camera bracket to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
bracket and adjust viewing angle
using the Thumb Screw to rotate
position.
43 Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Attach power cable to power
extension cord AC Adapter.
Plug into electrical outlet.
ANDROID DEVICE SETUP APPLE DEVICE SETUP
1
2
FREE APP DOWNLOAD
From your Android device, DOWNLOAD and INSTALLthe free WDVR App.
Tap Scan QR and scan in the QR code located on the rear of the monitor. The device ID will
automatically be entered.
Tap Add New. Tap the camera in the Connection List followed by the button to view the camera(s).
Tap New to start the setup.
Enter a device name. Enter the password, but it is VERY important that 1) the password was changed
from the default 123456 on the monitor and 2) the password is entered exactly as it on the monitor.
3
4
5
1
2
From your Apple device, DOWNLOAD and INSTALLthe free WDVR App.
Tap Scan QR and scan in the QR code located on the rear of the monitor. The device ID will
automatically be entered.
Tap Save. Tap the camera in the Connection List followed by the button to view the camera(s).
Tap +to start the setup.
Enter a device name. Enter the password, but it is VERY important that 1) the password was changed
from the default 123456 on the monitor and 2) the password is entered exactly as it on the monitor.
3
4
5
NOTE: Screen shots and icons may vary due to continuous updates to App and software development. FREE APP DOWNLOAD
NOTE: If you are having a difficult time connecting your smart device for remote viewing, please visit
www.ALCWireless.com/support to view the latest guides.
(2-3) Antennas
Quick Start Guide
AWS3377: 2 Camera System
AWS337: 1 Camera System
(2/3) AC power adapters
(1/2) Outdoor camera with
multi-position brackets
Ethernet Cable
WirelessSignal Indicator
PowerIndicator
MonitorTouch Screen
PowerIndicator AntennaJack
USB Jack
Stand
Reset Button
SD CardSlot
PowerJack Network Jack
PowerStatu
LED
PassiveInfrared
Sensor
Antenna
Connector
Mounting
Socket
LinkStatus
LED
Power
Pigtail
Pairing
2017/07/0509 : 34 : 18
V
1080p 1080p
C1 C1
SD
1
2Tap the Options icon to enter the System menu.
Tap Camera Setup icon to access Camera Setup.
3
Tap the desired camera to pair. Tap the Pairing
icon twice.
4
Press and Hold the Pairing button
on that camera pairing is
successful. If a camera is already
assigned to the selected channel,
the monitor overwrites that
camera link with the new one.
5
Tap on the Open/Close icon to open the menu options.

— 7 —
— 6 —
Getting to Know Your LCD Touch Screen Monitor
INTRODUCTION
Wireless Signal
Indicator
Power Indicator
Power Button
Antenna Jack
USB Jack
Stand
Reset Button
SD Card Slot
Power Jack
Monitor
Touch Screen
Network Jack

— 8 —
INTRODUCTION
Getting to Know Your Camera
FRONT
REAR
Power Status
LED
Passive Infrared
Sensor
Antenna
Connector
Microphone
Mounting
Socket
Link Status
LED
Power
Pigtail
Pairing Button

— 9 —
— 8 —
INSTALLATION
Installation Tips
Night Vision
• Before you install the camera, plan where and how it will be positioned, and where you will
route the cable that connects the camera to the power adapter.
• Optimized motion detection range is 6 - 18 feet for camera. The farther away an object is,
the less accurate the motion detection.
• Avoid having a direct light source in the view of the camera, including street lights, ceiling
or oor lamps, spotlights in the driveway, etc.
• Rainfall, pool water ripples/reections, tree/shrub leaves blowing in the wind – and the
shadows they create – can generate motion detection false alarms.
• Before starting permanent installation, have another person check the camera image on
the monitor with the camera positioned in the same place it will be permanently installed.
• It is recommended to ensure a clear line of sight between the camera and monitor and to
limit the amount of obstructions, such as walls and tree branches, between the camera
and monitor. Walls made of heavy building materials such as brick or concrete will
signicantly reduce signal range.
• If the signal will have to pass through a wall, placing the monitor or camera next to a
window will improve the signal strength.
• Do not install the camera pointing out of a window. The night time picture will be unusable
due to reection from the night vision LEDs.
• The cameras are pre-paired so they work out of the box. If you have purchased additional
cameras, you will need to pair them to the monitor, see “Camera Pairing” on page 24.
• As dust, grime, and cobwebs accumulate on the camera glass, they can reect light from
the infrared LED and might lower video quality. Periodically clean the lens glass with a
soft cloth.
• If the camera is too close to the monitor, you may get a whistling interference sound.
Simply move the camera away from the monitor to eliminate the interference sound.
The camera has built-in infrared LEDs to allow you to view at night for 24-hour surveillance. The
LEDs will automatically activate at night and the picture viewed will turn to black and white. The
night viewing range is up to 40 feet.
WARNING:
Weatherproof, IP66 rated cameras are suitable for outdoor installation. However, if possible, it is recommended
to install in a location that provides some shelter from the elements, such as beneath roof eaves.

— 10 —
INSTALLATION
uFlip out the stand on the back of the monitor. Connect the AC adapter to the
Power Jack on the side of the monitor.
v
Connect the internet cable from the rear
of the unit to your router.
w
Screw Antenna (white antenna) clockwise
into rear of camera and put into the
upright position.
Rotate and pull out the stand.
Internet Router (not included)
Setting Up the Monitor
TIP: You can use a USB mouse for easier navigation.

— 11 —
— 10 —
INSTALLATION
Setting Up the Monitor
x
Insert an SD Card (up to 128GB) into the
SD Card Slot. You can also connect an
HDD drive or Flash drive into the USB
jack. This will allow you to record videos.
yConnect the AC adapter to the Power
Jack on the side of the monitor. Connect
the other end of the adapter to a 120 volt
AC (standard indoor) power outlet.
UPress and hold the Power button on the top of the monitor for 3 - 4 seconds to
power it up.
The monitor will display the Live view. Connect the camera(s) as shown on the
next page.
NOTES
•It is recommended to use a 2TB HDD drive for long
term use.
•The max USB power for an HDD/Flash drive is
5V/1000mA. Use an external power supply for the
drive if it is more.
•Format the drive/SD Card before using, see page xx.

— 12 —
INSTALLATION
Installing the Camera(s)
u
If not mounting, but just using on a flat
surface (desk, table, etc.), skip to step 4.
v
Secure the multi-position Camera
Bracket to a stable surface, ceiling or
wall using the three supplied screws.
If needed, three anchors are also
included.
w
Loosen the T-Bolt on the Camera
Bracket and adjust viewing angle using
the Thumb Screw to rotate position.
xBOTTOM/SURFACE MOUNT:
uAlign Mounting socket on bottom of
the camera with T-Bolt and screw
camera onto the T-Bolt until it is in the
desired position.
vTighten the Brace against the camera
to secure it in place.
wSet the desired camera angle and
then tighten the Thumb Screw.
CEILING MOUNT:
uAlign Mounting socket on top of
the camera with T-Bolt and screw
camera onto it until it is in the
desired position.
v Tighten the Brace against the camera
to secure it in place.
wSet the desired camera angle and
then tighten the Thumb Screw.
T-Bolt Thumb
Screw
T-Bolt Thumb
Screw
u
v
w
u
v
w

— 13 —
— 12 —
INSTALLATION
Installing the Camera(s)
yScrew antenna clockwise into rear of the camera.
U
Connect one end of an AC adapter to
the camera’s power pigtail and plug the
other end of the adapter to a 120 volt AC
(standard indoor) power outlet.
VMake sure the Power status LED turns red and the Link Status LED turns green.
If it doesn’t, try reconnecting the AC
adapter, and make sure the power outlet
is not controlled by a wall switch.
You should now have video on your Live screen. If you do not have video, pair the
cameras as described on page 22.
Repeat steps for additional camera(s).
TIP: Pair additional cameras as shown on page 22.
Power Status
LED
Link Status
LED

— 14 —
SYSTEM INTRODUCTION
Live Screen and Menu
Your monitor’s system software operates through a series of screens that let you choose
groups of operations. For example, when you tap on the camera icon in the Pop-up menu, you
can set how you want the main viewing screen (“Live screen”) to display images from the paired
cameras. You can scan between cameras, show all cameras on a single screen (Quad view or
Smart Quad view), or only display a specic camera.
The Live screen lets you view the camera transmissions. It also lets you set up your screen
display and make adjustments to it. Icons on the screen itself let you monitor power and
camera status.
See the following page for descriptions of the Menu icons
2017/07/05 09 : 34 : 18
V
1080p 1080p
C1 C1
SD

— 15 —
— 14 —
SYSTEM INTRODUCTION
Description of Icons
Icon
Open
Options
Quad Display
Smart Quad Display
Record One Camera
Icon Description
Tap to open the Settings menu.
Tap to enter the Main Menu, see page 18.
Tap to select Quad Display.
Tap to select Smart Quad Display.
Tap to start recording the selected camera; the Record
icon will appear. Tap again to stop recording.

— 16 —
SYSTEM INTRODUCTION
Description of Icons
Icon
Record All Cameras
Volume
Close
Icon Description
Tap to start recording from all cameras; the Record icon
will appear. Tap again to stop recording.
Tap to mute or change volume setting.
Tap to close the Settings menu.

— 17 —
— 16 —
SYSTEM INTRODUCTION
Live Screen Displays
The Live screen displays in three views - Quad View, Smart Quad view or Full View. Quad
View divides the screen’s image area into four quadrants and displays camera video in each
quadrant. If less than four cameras are connected and on, only those cameras’ videos will
display on the Live screen. Smart Quad will show one large camera views and up to three
smaller camera views.
Full view displays a single camera’s video on the entire screen. If you are in a Quad View, tap
on the camera quadrant you want to expand to Full View. Tap on that image to return to Quad
View.
2017/07/05 09 : 34 : 182017/07/05 09 : 34 : 18
V
1080p 1080p
C1 C1
SD
2017/07/05 09 : 34 : 18
V
1080p
C1
SD
2017/07/05 09 : 34 : 18
C1
Quad View
Smart Quad View

— 18 —
SYSTEM INTRODUCTION
Camera Views
uTap on the Open/Close icon to open the Menu options.
v
Tap the Quad or Smart Quad
icon.
w
The display will change to the
selected Quad camera display.
Tap one of the screens to view
that screen only.
2017/07/05 09 : 34 : 18
V
1080p
C1
SD
2017/07/05 09 : 34 : 18
C1
2017/07/05 09 : 34 : 18
V
1080p 1080p
C1 C1
SD
2017/07/05 09 : 34 : 18
V
1080p 1080p
C1 C1
SD
TIP: If the screen is not tapped within
two minutes, it will revert back to the
Quad display.
To change camera views, perform the following: