Alcatel-Lucent OmniPCX Enterprise User manual

1
TECHNICAL COMMUNICATION No. TC1449 Ed. 02
OmniPCX Enterprise Nb of pages : 108 Date : 22 June 2011
URGENT
NOT URGENT TEMPORARY PERMANENT
SUBJECT : INSTALLATION PROCEDURE FOR VERSION J1.410.34.C – RELEASE 10.0
This is the technical release of OmniPCX Enterprise with the version J1.410.34.c. It corresponds to
Release 10.0.
It is available on Alcatel-Lucent Business Portal (https://businessportal.alcatel-lucent.com) and on DVD
with the references 3BA 27740 AAAB (non secured version) and 3BA 27741 AAAB (secured version).
Technical modes to change the release, new features, registered restrictions and controlled features
are described in the installation procedure for version J1.410.34.c.

2

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 3 TC1449
CONTENTS
1. APPLICATION DOMAIN ...............................................................9
2. REFERENCE DOCUMENTS............................................................9
3. INTRODUCTION TO RELEASE 10.0 ............................................11
3.1 New hardware........................................................................................ 11
3.2 New features .......................................................................................... 11
3.2.1 Increasing provisioning level ..........................................................................11
3.2.2 Localization.....................................................................................................11
3.2.3 Terminals........................................................................................................11
3.2.4 SIP Enhancement ............................................................................................11
3.2.5 Security...........................................................................................................12
3.2.6 Call Handling features....................................................................................12
3.2.7 Applications....................................................................................................12
3.2.8 Serviceability ..................................................................................................12
3.3 Features under PCS ................................................................................ 12
3.4 Features availability in progress ............................................................. 12
4. CONTENT OF THE SOFTWARE PACKAGE...................................13
5. BEFORE STARTING.....................................................................17
5.1 Applications, functionalities not supported by Release 10.0.................... 17
5.2 Applications and functionalities dependent on CPUs and hardware
platform used ......................................................................................... 19
5.3 VoIP network conformity check ............................................................... 20
5.4 Recommendations and security............................................................... 20
5.5 DECT....................................................................................................... 20
6. CONDITIONS FOR INSTALLATION IN NETWORK.......................21

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 4 Ed. 02 / 22 June 2011
6.1 Installation of Release 10.0 in network with Releases 5.1.x, 6.x, 7.x and
8.0 .......................................................................................................... 23
6.2 Installation of Release 10.0 in network Releases 8.0.1, 9.0 and 9.1 ....... 23
6.3 Audit/Broadcast ...................................................................................... 24
6.4 Compatibility of external applications..................................................... 24
7. COMPATIBILITIES.......................................................................24
7.1 Reminder on boards supporting the Transit function and the direct RTP . 24
7.2 Delay (in one direction) introduced by IP gateways................................. 25
7.3 Delay (in one direction) from an IP Phone towards a set behind ACT or
eMG........................................................................................................ 25
7.4 ABC-F2 compatibility depending on the hardware and the type of
configuration used (with or without compressed voice)........................... 26
7.4.1 Rules used in the tables ..................................................................................26
7.4.2 Table of ABC-F2 compatibility.........................................................................28
7.5 Network & VoIP compatibility ................................................................. 29
7.5.1 ABC-F2 trunk group compatibility summary ...................................................29
7.5.2 Number of compressors/algorithms that can be used with INTIPx and
GDx/GAx .....................................................................................................................29
7.6 Alcatel-Lucent 4635 voice mail compatibility .......................................... 30
7.7 Hardware compatibility .......................................................................... 31
7.7.1 CPU boards ....................................................................................................31
7.7.2 Common Hardware CPU boards ....................................................................32
7.7.3 Appliance Server ............................................................................................32
7.7.4 Hard disk capacity ..........................................................................................34
7.7.5 USB keys compliant with CPU7-2, Appliance Server and Blade Server............34
7.7.6 IO2 board.......................................................................................................34
7.7.7 INTIP board ....................................................................................................34
7.7.8 NGP boards ....................................................................................................35
7.7.9 INT1/INT2 boards...........................................................................................36
7.7.10 Negotiation of speed of Ethernet interfaces.................................................36
7.8 Subdevices & IP Phone compatibility (Reprom reference/Binary version) 37
7.9 Application compatibility ........................................................................ 38

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 5 TC1449
7.10 OEM/External equipment compatibility................................................... 39
7.10.1 UPS..............................................................................................................39
7.10.2 V24 over IP ("Moxa" unit) .............................................................................39
7.10.3 T38 Fax over IP............................................................................................39
7.10.4 SIP Survivability ...........................................................................................40
7.10.5 LLDP-MED on IP Touch sets..........................................................................40
8. CLIENT INFORMATION..............................................................40
8.1.1 Reminder of changes appeared in Release 9.1 ...............................................40
8.2 Reminder of changes appeared in Release 9.0 ....................................... 40
8.3 Reminder of changes appeared in Release 8.0 and 8.0.1 ....................... 41
8.4 Reminder of changes appeared in Release 7.1 ....................................... 41
8.5 Reminder of changes appeared in Release 7.0 ....................................... 41
8.6 Reminder of changes appeared in Release 6.1.1 .................................... 41
8.7 Reminder of changes appeared with R4.2 .............................................. 41
8.8 Reminder of changes appeared with R4.1 .............................................. 41
8.9 Reminder of changes appeared with R3.0 .............................................. 41
9. PREPARATION ...........................................................................42
9.1 Checking compatibility............................................................................ 42
9.2 Voice guides ........................................................................................... 42
9.2.1 System voice guides........................................................................................42
9.2.2 Alcatel 4645 voice guides ...............................................................................42
9.3 OPS ........................................................................................................ 44
9.4 Saving the database (swinst) .................................................................. 44
9.4.1 Rebuilding the database before saving...........................................................45
9.4.2 Saving the rebuilt database ............................................................................45
9.5 Saving Chorus/Linux data....................................................................... 45
9.6 Saving Actis files in the image of the site ................................................ 46
9.7 Saving the lanpbx.cfg file........................................................................ 46
10. OPERATING MODE ....................................................................46
10.1 New installation ..................................................................................... 46

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 6 Ed. 02 / 22 June 2011
10.2 Updating R5.1.x, R6.x, R7.x, R8.0.x, R9.x to R10.0 .................................. 46
10.3 OmniPCX 4400 migration to R10.0 ......................................................... 47
10.3.1 Use of the hardware or software key ..........................................................47
10.3.2 Crystal hardware compatibility with an Appliance Server............................47
11. LOADING THE SOFTWARE.........................................................47
11.1 Generalities ............................................................................................ 47
11.1.1 Security activated by default during a installation .......................................48
11.1.2 Installation of a secured system for VoIP encryption ("IP Touch Security"
service) 48
11.1.3 Using the Remote Download .......................................................................49
11.1.4 Reading the hardware key or CPU-id of the CPUs.......................................49
11.1.5 Creating a blank database ..........................................................................49
11.2 Restoring the database and site tickets ................................................... 50
11.3 Restoring Chorus/Linux data .................................................................. 50
12. TRANSLATIONS .........................................................................51
12.1 Installing OPS files.................................................................................. 52
12.2 Remarks ................................................................................................. 52
13. UPDATING THE BETA TEST SYSTEMS..........................................53
14. SYSTEM MANAGEMENT.............................................................53
14.1 Declaring the automatic start-up of the telephone.................................. 53
14.2 Updating the date and time .................................................................... 53
15. CHECKING START-UP OF CPU/IO1/IO2/IO2N...........................53
16. COMPULSORY MINIMUM ADDITIONAL DATABASE
MANAGEMENT..........................................................................54
16.1 Reminder for sites migrating from Release < 3.0.................................... 54
16.1.1 IP addressing plan (from R3.0) ....................................................................54
16.1.2 IP routing (from R3.0) ..................................................................................54
16.1.3 ABC network (from R3.0).............................................................................54
16.1.4 ARS Time Schedule management (from R3.0)..............................................54

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 7 TC1449
16.1.5 Time-outs (from R3.0)..................................................................................55
16.1.6 Accounting (from R3.0)................................................................................55
16.1.7 Filter table (from R3.0) ................................................................................55
16.2 Reminder for networked sites migrating from Release < 7.x .................. 55
16.3 Additional management for IO2N .......................................................... 55
16.4 Synchronization ...................................................................................... 56
16.5 System parameters to check.................................................................... 56
16.5.1 Direct RTP ....................................................................................................56
16.5.2 Frame VoIP (Enhanced quality voice)...........................................................56
16.5.3 Direct RTP for H323 terminals......................................................................57
16.5.4 Inter-node protocol H323............................................................................57
16.5.5 Pre-login (V120) ..........................................................................................57
17. STARTING UP THE CPU IN ITS ENVIRONMENT ON SITE.............57
17.1 Downloading the couplers and sets ........................................................ 57
17.2 Sites with the "IP Touch Security" feature: Migration from R6.2 or R7.x to
R10.0 with SSM & MSM boxes in version 1.3.xx ...................................... 57
18. CHECKING CORRECT OPERATION.............................................58
APPENDIXES
APPENDIX 1 - NEW FEATURES
APPENDIX 2 - REMARKS & RESTRICTIONS

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 8 Ed. 02 / 22 June 2011

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 9 TC1449
1. APPLICATION DOMAIN
WARNING
This document applies to the OmniPCX Enterprise Release 10.0 in standardized version J1.410.34.c.
In term of corrections, patch J1.410.34.c is at the same level than G1.503.35.g / H1.301.48 /
I1.605.23 and only introduces new features.
Additional corrections of major RAs, coming from I1.605.24 to I1.605.26 have been integrated
selectively.
This document is based around a central document, the Release 10.0 installation procedure, and
appendices which describe:
−The restrictions and remarks.
−The new features.
Note
The appendices below of previous installation procedures were removed from this document and
replaced by technical communications to make easier their search and their update:
−The comparison of licenses from R5.0 Ux.
−The migration from an OmniPCX 4400 to an OmniPCX Enterprise.
−The synchronization of the system after migration to an OmniPCX Enterprise with an Appliance
Server.
−The reminder of features released in previous releases.
2. REFERENCE DOCUMENTS
Technical communications:
TC0150 Configuring the OmniPCX 4400 as "boot server" for IP Phones attached to networked
OmniPCX 4400
TC0155 Compatibility of Alcatel 4635 with OmniPCX 4400 backplanes (Reminder of restrictions)
TC0230 CPU6 Step2 board - 3BA23197 AA
TC0259 Alcatel 4635 - Migration procedures
TC0274 DECT Compatibilities
TC0297 Change of external/internal ringing melodies in Release 4.2
TC0298 Migration from Alcatel 4630 voice mail to Alcatel 4635 voice mail
TC0328 Wrong initialization of "Antenna Diversity" after translating from Release 3.0 to Release 3.1,
3.2M, 4.1, 4.1.1
TC0336 Setting the T38 fax over IP application (with MP-102 version 4.0)
TC0418 Compatibilities
TC0487 Migration ACD-V1 to CCDistribution
TC0594 Coupling a Bluetooth device on Alcatel IP Touch set 4068

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 10 Ed. 02 / 22 June 2011
TC0680 Risk of wrong negotiation of speed and duplex mode of Ethernet interfaces for INTIPs, GA &
GD after software upgrades
TC0682 Stop of dynamic patch delivery from Release 6.1.1
TC0712 Modem, Fax, Data transparency over IP
TC0777 Comparison of licenses from Release 5.0 Ux
TC0778 Migration OmniPCX 4400 to OmniPCX Enterprise
TC0779 Synchronization of the system after migration to OmniPCX Enterprise with Appliance Server
TC0780 New hardware and features from Release 5.1
TC0781 Migration of Mobile IP Touch from Release 1.x to Release 2.x
TC0941 VoWLAN compatibility
TC0944 Configuration, incidents & log files recovery
TC1106 Thomson ST20xx SIP sets deployment
TC1108 Native SIP Call Controller: White list
TC1212 CS-2 board introduction
TC1254 Technical Release Note for Device Management Server 1.2.000.020
TC1255 4008 / 4018 SIP set deployment with OmniPCX Enterprise
TC1271 Checks for integrity and authenticity of downloaded software
TC1290 LLDP-MED on IP Touch sets
TC1319 Installing and using the OmniPCX Enterprise PC Installer v2.26 software
TC1373 Alcatel 4635 - Installation procedure for version 5.4.9 - Release 5
TC1410 Alcatel 4059 MAC / IP - Installation procedure for version 5.2.3
TC1418 Technical Release Note of VoWLAN R5.0
TC1435 Technical Release Note of OmniTouch 8118/8128 WLAN handsets version 2.2.29
TC1448 Technical Release Note for OmniPCX Enterprise Release 10.0 - Version J1.410.34.c
TC1458 One way VoIP calls or white calls on installation with INTIP3A boards behind firewalls and
SBC
TC1479 OmniVista 4760 - Installation procedure for version 5.2.01.03.d - Release 5.2
TC1500 Technical release note for MyICPhone in an OmniPCX Enterprise R10 Hotel environment -
Release R200 version 01.026.5
TC1501 OmniVista 8770 - Installation procedure for version 1.0.20.01.b - Release 1.0

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 11 TC1449
3. INTRODUCTION TO RELEASE 10.0
Release 10.0 (version J1.410.34.c) is a major release.
Note
In term of corrections, patch J1.410.34.c is at the same level than I1.605.23 and only introduces
new features.
Additional corrections of major RAs, coming from I1.605.24 to I1.605.26 have been integrated
selectively.
The program of certification is available on Business Portal.
This document indicates the steps necessary for installing version J1.410.34.c for:
−a new installation,
−an evolution from R5.0 Lx, R5.x, R6.x, R7.x, R8.x, R9.0, R9.1 to R10.0
−a migration from OmniPCX 4400 to OmniPCX Enterprise R10.0 controlled by OmniPCX 4400
CPU type or Appliance Server (AS).
New features from Release 10.0.
3.1 New hardware
−New eZ32-2 board with CPC (Calling Party Control) support.
3.2 New features
3.2.1 Increasing provisioning level
−Increase number of hunting groups
−Increase number of Phone Class Of Service
−Increase number of attendant groups
−Increase number of boss per secretary
3.2.2 Localization
−Japanese support on 4059 (Windows 7)
3.2.3 Terminals
−Support the OmniTouch 8118 and 8128 WLAN handsets
−8082 MyICPhone support in hospitality environment (waiting for MyICPhone 8082 and 8770
versions availability).
3.2.4 SIP Enhancement
−SIP Trunk enhancement: CLI display with From header, even if P-Asserted-ID header is available
(Incoming call)
−SIP Trunk enhancement: Service route header (RFC 3608) and Path header (RFC 3327)

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 12 Ed. 02 / 22 June 2011
−SIP Trunk enhancement: Faster overflow on no answer to INVITE, REGISTER and OPTIONS
method
−SIP MyIC PC: Overflow on associate when out of order
3.2.5 Security
−Copy process from etc/host to swinst/.rhosts
3.2.6 Call Handling features
−FlexOffice enhancement
−Call park timers
−Emergency Call to Attendant (with 4059IP version 5.2.5).
3.2.7 Applications
−Alcatel-Lucent 4059 on Windows 7 32bits
−OmniPCX Enterprise PC Installer on Windows 7 32bits
3.2.8 Serviceability
−Remote download evolution
3.3 Features under PCS
If one of the following features has to be implemented on an OmniPCX Enterprise, contact Technical
Support for the deployment:
−SIP TLS/sRTP for external SIP Gateway
3.4 Features availability in progress
−SIP trunking.
Interoperability tests with new carriers done under the control of the SIP Bid Desk.
The following features are in validation progress and will be available in an upcoming OmniPCX
Enterprise patch
−New SIP improvement for interworking with OpenTouch Solution
−Call Routing Groups
−NOE in SIP protocol encapsulation

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 13 TC1449
4. CONTENT OF THE SOFTWARE PACKAGE
The software package contains the OmniPCX Enterprise J1.410.34.c application.
The different versions of the OmniPCX Enterprise application modules are:
−Linux : 72.0
−Linux Package : 72.3
−swinst : 2.63.0
−PC Installer : 3.2
−OmniPCX Enterprise R10.0: J1.410.34.c: J1.410 complete version
J1.410.34 static patch
J1.410.34.c dynamic patch
SJ1.410.34.c secured patch (Note)
Note
The access to secured patch is only given on request after filing the appropriate document posted on
Business Portal Customer Support > Technical Support > Software download > OmniPCX Enterprise
> OmniPCX Enterprise > All Release > Generic > Request for Security Patch Access.
From Release 6.1.1, dynamic patches will be no more delivered. They are replaced
by static patches; refer to the technical communication TC0682 Stop of dynamic
patch delivery from Release 6.1.1.
Reference of compatible CD-ROMs and DVD
REMINDER
As of Release 6.1, the software is only delivered on DVD.
CD-ROM/DVD Reference MD5 checksums (1)
Version J1.410.34.c (DVD) 3BA 27740 AAAB 62fda425d70025a35c048e907d15faf2
*Image_R100_J141034c.iso
Secured Version SJ1.410.34.c
(DVD)
3BA 27741 AAAB 85adb9c5c518371fd92fff19fb714250
*Image_R100_SJ141034c.iso
System voice guides v5.3 3BA 57423 AAAG
OmniVista 4760 R5.2.01.03.d 3BH 11632 AKAA 4bf879c27952dd851462a8412fde6a19
*CD Version R5.2.01.03.d.iso (2)
OmniVista 8770 R1.0.20.01.b 3BH 11669 AAAC (3)
SIP Device Management Server
1.2.000.020 – Release 1.2
3BH 11761 AAAD 392937c3530b40f1101d040631483065
*image_dm_12000020.iso
(1) Before installing the software, we strongly advise you to check the integrity and authenticity of the
software. For detailed information about checksums, please refer to the technical communication
TC1271 Checks for integrity and authenticity of downloaded software.
(2) This checksum concerns only the DVD containing the OmniVista 4760 software Release
R5.2.01.03.d reference 3BH 11628 AMAA.

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 14 Ed. 02 / 22 June 2011
(3) This checksum concerns only the DVD containing the OmniVista 8770 software Release
R1.0.20.01.b reference 3BH 11670 AAAC.
Note
PSP software (Phone Set Programming) is not delivered with J1.410.34.c and SJ1.410.34.c DVD
versions.
PSP software is available on Business Portal (https://businessportal.alcatel-lucent.com) in section
Customer Support > Technical Support > Software Download > OmniPCX Enterprise > OmniPCX
Enterprise > Phone Set Programming.
This version is compatible with OmniPCX Enterprise Release 10.0.
List of binaries in version J1.410.34.c
The new binaries of the version are in bold characters.
Released R10.0 Versions
Binaries J1.410.34.c
Binaries relative to system
bios CPU5 Step3 (3)
bios CPU6 Step2 (1) 3BA24095AAAB08_4.8
bios CPU7 3BA24115AAAA16_3.02
bios CS 10.14
bios GD 10.14
bios CS-2 (AMI) 3EU24009AAAA01_9.0
io1n 16
io2 4.6
io2n 5.17
linux_patch 72.3
obca 1.5
pc_install 3.2
swinst (2) 2.63.0
Binaries relative to DECT
dect4 7.9
dect8 1.28
ibs_appli_ng 49.03
ibs_boot_ng 71
ibsng 18.06
rbsng 53.0
startibsng 0.71
Binaries relative to compression boards
binintip_appli 16.03
bindsintip 4.37.3
bindsintip2 3.44
bootintip 6.10
mg_appli 46.04
binmcv 3.9.0
binmcv2 3.44
mg_version_country 1.1.13
ioip 4.08
lio_comp2 3.40

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 15 TC1449
Released R10.0 Versions
Binaries J1.410.34.c
rlio_comp2 3.27
mg3 3.35
intip3 3.35
Binaries relative to sets
noeip 4.31.00
bin40x8 4.31.00
dat40x8 4.31.00
noe40x8 4.31.00
noeipG 4.31.01
bin40x8G 4.31.01
dat40x8G 4.31.01
noe40x8G 4.31.01
noesip4018 2.10.90
noesip40x8G 2.10.60
Binnoeuax9 3.81.00
Binnoeua19 3.81.00
jpn_4068 1.00.01
jpn_40x8 1.00.00
jpn_40x9 1.00.01
kor_4068 2.01.00
kor_40x8 2.01.00
kor_40x9 2.01.00
chi_4068 2.01.00
chi_40x8 2.01.01
chi_40x9 2.01.01
ipphone 2.31
tscip 5.2
tscipv1S 3.0
Secured binaries
noeip 4.36.00
bin40x8 4.36.00
dat40x8 4.36.00
noe40x8 4.36.00
noeipG 4.36.01
bin40x8G 4.36.01
dat40x8G 4.36.01
noe40x8G 4.36.01
SM modules (Thales) (4) 3.3.05
mg_appli 46.04
security Thales library 1.1.02
mg3 3.85
intip3 3.85
Thales SRTP client 1.0.06
Thales VPN client 1.1.03
Binaries relative to boards
brapra 2.06

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 16 Ed. 02 / 22 June 2011
Released R10.0 Versions
Binaries J1.410.34.c
c1nvgpa2 3.4
c1nvua 5.0
c1nvz32 3.2
cpl2dpnss 1.11
dpnss 2.3
dpnssnv 2.3
dpt1 2.05
dsp_emtl24021 3.01
dsp_gpa 2.01
dsp_vgu 1.5
dsp0Z32 1.02
dsp1_gpa2 1.09
dsp1nddi2 2.01
dsp2_gpa2 1.10
gpa2tns 1.11
gpa 2.24
intof 1.24
intofssync 1.05
intof2 2.4
ivrZ24 2.0
lia 4.18
lioebbc2 3.05
lio b/p/x 3.25
mic2 2.31
nddi 2.5
nddi_in 2.7
nddi2 2.22
nprae 2.06
pcm2_ru 1.6
pra 2.06
pra2 2.26
rma 3.04.04
tonesnv 2.17
ua 3.81..00
uscvg 2.9
Binaries relative to attendants
fbc 2.13
mapacs2 2.01
ta/mac 4.7
ta/pac 2.01
Binaries relative to VoWLAN
noemipt_r2 109.025
noemipt_r3 120.027
noemipt8_r100 2.2.9

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 17 TC1449
1The delivery of a new CPU6 Bios requires to reboot the PABX after installing the dynamic patch.
2You should connect to swinst to complete its installation.
3CPU5 Step3 is no longer supported from Release 8.0.
4SM Modules Thales: this is the reference seen in mgr.
5. BEFORE STARTING
5.1 Applications, functionalities not supported by Release 10.0
REMINDER
As of Release 5.1, some applications and functionalities of Release 5.0 Ux are no more supported,
and will have to be replaced by others.
The table below shows all the applications and functionalities which are no more provided by
OmniPCX Enterprise R10.0, whatever hardware used.
Migration batches exist including a specific rate, which have been defined and taken into account
automatically by Actis R16.1.
Family Type of application Migration to
Compulsory
deletion/
modification
before migrating
to R10.0
Documentation
OmniVista 4760i (3) mgr or OmniVista 4760 Not applicable System Documentation
4715
4730
4740
4740 PTP
OmniVista 4760 R5.2 No TC1479
4730i mgr or OmniVista 4760 Not applicable System Documentation
4755 OmniVista 4760 R5.2
4000 Directory Server 4760 LDAP Server
47xx
Directory PC Client for
4755/4000
4760 Directory Client No
TCV010
TCV017
TC1479
4630 4635J (default) or
4635H2 Yes TC0298
4620 or VPS35 (1) 4635 VPM35 or VPU6 Yes No
4635 VPCPU 4635 VPM35/VPU6 Yes
Voice mail
4635 VPCPU-1 4635 VPM35/VPU6 Yes
TC0155, TC0259,
TC1373
4300 Manage the equipment in
the new ACT Yes No
2600, 4600 Delete all equipment and
manage it in a new ACT
Yes No
ACT migration
5400 Delete all equipment and
manage it in a new ACT
Yes No
ACD-V1 CCD R7.1
4735 & 4736 CCS Yes TC0487
ACD-V1
4961 first party TAPI
middleware
No migration – Not
supported Not applicable No

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 18 Ed. 02 / 22 June 2011
Family Type of application Migration to
Compulsory
deletion/
modification
before migrating
to R10.0
Documentation
4973 Telephony
Assistant
Not supported (Replaced
by OmniTouch UC My
Phone)
Not applicable
Alcatel Unified
Messaging
Not supported (Replaced
by OmniTouch UC) Not applicable
SPB IO2, IO2N or IP/V24
module No System Documentation
Datcol No migration – Not
supported Not applicable Not applicable
Overflow on QoS (VoIP) Not supported No No
CPU2, CPU3,
CPU5 Step1/Step2/
Step3
Replaced by
CPU6 Step2 - 128 MB
CPU7 – 256 MB
or Appliance Server
(depends on the Actis
configuration)
No No
LIOE & TSC-LIOE (2) INTIP Yes No
Others
INT1/INT2 INTOF Yes No
VoWLAN VoWLAN R1.x VoWLAN R5.x No TC1418
(1) VPS35 board is replaced by the VPU6 board for any migration towards OmniPCX Enterprise
R10.0.
(2) The boards are not authorized on the nodes of a network.
LIOE boards are in phase out from Release 6.1. They are no more supported by
Release 10.0.
(3) As of Release 10.0, OmniVista 4760i is no more supported and can’t be activated anymore. Use
mgr or OmniVista 4760 to configure the OmniPCX Enterprise. In case of upgrade to Release
10.0, the application will be deactivated, if previously activated.

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 19 TC1449
5.2 Applications and functionalities dependent on CPUs and hardware platform used
Depending on the type of CPU (CPU6 Step2/CPU7, Appliance Server, Call Server in rack) and the
hardware platform used (Crystal or common hardware), certain applications or functionalities are
not authorized.
Appliance Server
CPU6 Step2
CPU7 Call Server Common
hardware Crystal hardware
4645 No Yes Yes NoVoice mail
4615 / VMU-OBCA
4615/VMU-OBCA2 (1)
Yes
(only with CPU6)
No No No Ö4635J (VPU5) (2)
Campus DECT Yes No No No (4)
DTM for DECT on
CPU6
Yes No Ö
DECT8
No Ö
DECT8
No ÖDECT8 (2)
VG on CPU6 Yes No No No ÖGPA2 (2)
DTMF Yes
(on CPU6 & CPU7)
No No No ÖGPA2 (2)
V24 Yes No No No ÖV24-IP module (3)
Music on hold on CPU Yes Yes No ÖZ port No ÖZ port (3)
IO2/OBCA (5) Yes
(only with CPU6)
No No No (5)
IO2N Yes No No No (5)
SPB No ÖIO2 No No No ÖV24-IP module (3)
3 ACT levels Yes No No No (3)
Various
eRMA No Yes Yes No
(1) Can no more be configured in a new business account.
(2) Replacement is carried out by Actis.
The DECT8 board is not compatible with DECT2/DECT4 boards. If DECT2/DECT4 boards are
present, ACTIS will replace them.
REMINDER
DECT2/DECT4 and DECT4 HB boards are in phase-out. They are supported by
Release 10.0 but can no more be configured for addition or for new installation.
(3) Manual modifications are required.
(4) No alternative possible.
(5) Boards IO2, IO2N (30 B channels), OBCA and OBCA2 (3 B channels) do not exist with an
Appliance Server or Call Server. A certain number of applications and functionalities are
therefore no more supported, such as:
•Extension of V24 physical ports via SPB board on which applications were managed
(greeting management, hotel, login, etc.).
•Direct management of data applications in V120 accessible from a terminal adapter (TA in
V120) locally or from the outside (appli login, SLIP, hotel management, etc.).

OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 20 Ed. 02 / 22 June 2011
−Data transmission in the B channel of a digital support (T2, PCM, etc.).
♦Link in a B channel of a T2 (switched or not switched).
♦Link in a B channel of a PCM board (often encountered in South America where T2s are
less common).
♦Link via TA/Modems.
♦No more back-up signaling via ISDN.
♦X25 in a B channel (Tunnel operation in T2 and Centrex operation for centralized
network management via 4740).
♦Frame Relay in the case of saturation of the signaling channel in D.
In this case, the Tunnel, Broadcast and network incident type X25 applications pass
through a B channel (application of over-reservation coefficient 15 in the D channel of a
link allows Frame Relay not to be carried out, but the mechanism still exists).
5.3 VoIP network conformity check
The OmniPCX Enterprise R10.0 is a native IP product when using a CPU-CS, CS-2 or Appliance
Server and in the case of hardware mixing. All signaling exchanged between the Call Server and the
Media Gateways or ACT Media Gateways is transported over IP. It guarantees a reliable IP
connection and respects the VoIP criteria (delay, jitter, packet loss) for VoIP configurations.
VoIP conformity tests are compulsory before deploying the VoIP solution; consult the VoIP
Engineering section on Business Portal for the methodology, recommendations and tools to
secure the VoIP installation. In particular, the VoIP Assessment tool for VoIP Audit and
diagnostic help guide are strongly recommended (available in the Brest training catalog).
CAUTION
With the "Modem, Fax, Data transparency over IP" feature, it is mandatory that the IP network is
almost perfect; see technical communication TC0712 Modem, Fax, Data transparency over IP.
5.4 Recommendations and security
The security rules and recommendations for securing the access and using the system are described
in the System Documentation "Security" section.
The IP services and port numbers used by the system are also available in this section.
5.5 DECT
Each system equipped with DECT needs a unique PARI configured in the system. To obtain the
PARI, consult the e-Flash eND03007D on Business Portal.
Information about DECT licenses in case of migration.
If you have an OmniPCX 4400 with DECT, you will find the number of DECT sets in the lock 82 (no
lock 175 and no lock 200).
If you make a migration to OmniPCX Enterprise, you will be able to see locks 82, 175 and 200.
During this migration, if you update the number of DECT sets, only locks 82 and 175 will change,
the lock 200 will keep the value of the number of DECT sets present in OmniPCX 4400
configuration.