Alcatel-lucent 9763 Instruction Manual

APPLICANT: Alcatel-Lucent EXHIBIT 3 FCC ID: AS5BBTRX-14

Page 1 of 1

EXHIBIT 3

Section 2.1033 (c)(3) INSTALLATION AND OPERATING INSTRUCTIONS

A copy of the installation and operating instructions to be furnished to the user. A draft copy of the

instructions may be submitted if the actual document is not available. The actual document shall be

furnished to the FCC when it becomes available.

Response

A copy of Alcatel-Lucent 9763 MCI B25 PCS LTE 2x250mW, AC Hardware Installation manual is

attached to this exhibit.

Title page

Alcatel-Lucent 9763

Metro Cell Indoor B25 LTE 2x250mW

Operation and Installation

3MN-MCI-IMOP

Issue 1 | December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Legal notice

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective

owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside

Alcatel-Lucent without its written authorization.

Not to be used or disclosed except in accordance with applicable agreements.

Use pursuant to applicable agreements

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Contents

About this document

Purpose ............................................................................................................................................................................................. xixi

Reason for reissue ........................................................................................................................................................................ xixi

Supported systems ........................................................................................................................................................................ xixi

How to use this document ......................................................................................................................................................... xixi

Safety information ........................................................................................................................................................................ xixi

Prerequisites .................................................................................................................................................................................. xiixii

Conventions used ........................................................................................................................................................................ xiixii

Document support ...................................................................................................................................................................... xivxiv

Technical support ....................................................................................................................................................................... xivxiv

How to order ................................................................................................................................................................................ xivxiv

How to comment ........................................................................................................................................................................ xivxiv

1Safety statements

Overview ...................................................................................................................................................................................... 1-11-1

Structure of safety statements ............................................................................................................................................... 1-21-2

Safety ........................................................................................................................................................................................... 1-41-4

Safety - specific hazards ......................................................................................................................................................... 1-51-5

Product safety ............................................................................................................................................................................. 1-91-9

2Hardware architecture and functionality

Overview ...................................................................................................................................................................................... 2-12-1

Functional description ............................................................................................................................................................. 2-22-2

Physical description ................................................................................................................................................................. 2-32-3

Supported installation options .............................................................................................................................................. 2-82-8

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements iii

Hardware and ancillary items ............................................................................................................................................ 2-102-10

39763 MCI installation

Overview ...................................................................................................................................................................................... 3-13-1

9763 MCI pre-installation

Overview ...................................................................................................................................................................................... 3-23-2

9763 MCI Pre-installation information ............................................................................................................................. 3-33-3

9763 MCI installation clearances ........................................................................................................................................ 3-53-5

9763 MCI daisy chain requirements .................................................................................................................................. 3-63-6

9763 MCI installation

Overview ...................................................................................................................................................................................... 3-93-9

Procedure 3-1: Mount the 9763 MCI onto a wall ....................................................................................................... 3-103-10

ALED State Description

Overview ..................................................................................................................................................................................... A-1A-1

LED status for 9763 MCI ..................................................................................................................................................... A-2A-2

BProduct conformance statements

Overview ..................................................................................................................................................................................... B-1B-1

United States compliance

Introduction ................................................................................................................................................................................ B-2B-2

Federal Communications Commission ............................................................................................................................ B-3B-3

Product safety conformance statements ........................................................................................................................... B-4B-4

Antenna exposure statements .............................................................................................................................................. B-5B-5

FDA/IEC optical transmitter product compliance statements ................................................................................. B-6B-6

Eco-environmental statements ............................................................................................................................................ B-7B-7

Glossary

Index

Contents

....................................................................................................................................................................................................................................

iv Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

List of tables

3-1 Recommended wall anchor materials ................................................................................................................ 3-43-4

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements v

List of tables

....................................................................................................................................................................................................................................

vi Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

List of figures

2-1 9763 MCI hardware- front and back views ..................................................................................................... 2-32-3

2-2 9763 MCI connection interfaces .......................................................................................................................... 2-42-4

2-3 LED position and orientation ................................................................................................................................ 2-62-6

2-4 Wall mount Installation example ......................................................................................................................... 2-82-8

2-5 9763 MCI daisy chain installation example ..................................................................................................... 2-92-9

3-1 9763 MCI mounting bracket ................................................................................................................................. 3-33-3

3-2 9763 Metro Cell Indoor installation clearances .............................................................................................. 3-53-5

3-3 Electrical backhaul and daisy chain configuration ........................................................................................ 3-63-6

3-4 Optical backhaul and daisy chain configuration ............................................................................................ 3-73-7

3-5 Mixed optical backhaul with electrical daisy chain configuration .......................................................... 3-73-7

3-6 Mixed electrical backhaul with optical daisy chain configuration .......................................................... 3-83-8

A-1 LED position and orientation ............................................................................................................................... A-2A-2

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements vii

List of figures

....................................................................................................................................................................................................................................

viii Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

List of procedures

3 9763 MCI installation

3-1 Mount the 9763 MCI onto a wall ...................................................................................................................... 3-103-10

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements ix

List of procedures

....................................................................................................................................................................................................................................

xAlcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

About this documentAbout this document

Purpose

The purpose of this document is to provide product operation information and hardware

installation instructions for an Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE

2x250mW.

Reason for reissue

The reissue reasons are:

Issue number Issue Date Reason for reissue

1 December 2013 Standard

Supported systems

This document applies to the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE

2x250mW.

How to use this document

Chapter 1 provides safety information.

Chapter 2 provides an overview of the 9763 MCI physical architecture and operations.

Chapter 3 provides 9763 MCI hardware installation steps.

Appendix A provides descriptions of the LED operational states for the 9763 MCI.

Appendix B provides 9763 MCI product conformances applicable within the United

States.

Safety information

For your safety, this document contains safety statements. Safety statements are given at

points where risks of damage to personnel, equipment, and operation may exist. Failure to

follow the directions in a safety statement may result in serious consequences.

...................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements xi

Prerequisites

None

Conventions used

Vocabulary conventions

In this document the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW is

also referred to as the 9763 MCI V1.0 B25 LTE 2x250mW, or simply the 9763 MCI.

Typographical conventions

The typographical conventions used in this document are described in the following table.

Appearance Description

emphasis Text that is emphasized

document titles Titles of books or other documents

graphical user interface text Text that is displayed in a graphical user

interface

variables

A value or command-line parameter that the

user provides

Technical conventions

Lengths and other measurements are given in metric units, with non-metric units given as

equivalents for use in non-metric markets.

For manufactured parts, the following system of conventions is used:

•Metric sizes of nuts, bolts, flat washers, and lock washers are identified by an

uppercase letter M followed immediately by a size in millimeters (example: M10)

•American fractional sizes of nuts, bolts, anchor bolts, and washers are identified by a

number followed immediately by a double apostrophe (example: 3/8"). In the case of

lengths measured in feet, "2 feet" is used rather than "2'" so that the single apostrophe

is not overlooked.

The illustrations in this document do not contain all details and exceptions, but are rather

intended to highlight main points. Dimensions are usually shown in millimeters, with

inches in parenthesis. As an example, 680.0 (26.77) equals 680 millimeters or 26.77

inches.

Wire gauges are specified in metric units. Equivalent sizes in the American Wire Gauge

(AWG) system are given in the following table.

About this document

....................................................................................................................................................................................................................................

xii Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Standard cross-sections and wire diameter of round copper conductors

The following table is from CEI/IEC 60947-1:2004, Table 1, Standard cross-sections of

round copper conductors and approximate relationship between mm2and AWG/kcmil

sizes for reference. Additional wire sizes are included in this information product as

appropriate for the topic.

ISO rated cross-sectional area (mm2) AWG/kcmil size

0.2 24

0.34 22

0.5 20

0.75 18

1-

1.5 16

2.5 14

412

610

10 8

16 6

25 4

35 2

-1

50 0 (1/0)

70 00 (2/0)

95 000 (3/0)

- 0000 (4/0)

120 250 kcmil

150 300 kcmil

185 350 kcmil

- 400 kcmil

240 500 kcmil

300 600 kcmil

NOTE: The dash, when it appears, counts as a size when considering connecting capacity (see

7.1.7.2 in the standard).

About this document

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements xiii

Document support

For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at

the following telephone numbers. These numbers apply for document support only. Please

see the section “Technical support” for details about product hardware, software, and

technical support.

When using this type of

phone

From within the United

States, dial

From outside the United

States, dial

Cellular or VoIP 1-888-582-3688 +1-630-224-2485

Landline – phones lacking the

plus (+) character

1-888-582-3688 origination country exit

code-1-630-224-2485

(replace the plus sign with

your country's exit code)

See a listing of exit codes.

Technical support

For technical support, contact your local Alcatel-Lucent customer support team. See the

Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact

information.

How to order

To order Alcatel-Lucent documents, contact your local sales representative or use Online

Customer Support (OLCS) (http://support.alcatel-lucent.com).

How to comment

To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-

lucent.com/comments/) or e-mail your comments to the Comments Hotline

([email protected]).

About this document

....................................................................................................................................................................................................................................

xiv Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

11Safety statements

Overview

Purpose

This chapter provides general information on the structure of safety instructions and

summarizes general safety requirements.

General safety and residual risk

The equipment has been developed in line with state-of-the-art technology and conforms

with current national and international safety requirements.

The equipment is considered safe during normal operation when safe working practices

are complied with. However, hazards may arise if procedures are not followed correctly

or safe working practices are not complied with.

Contents

Structure of safety statements 1-2

Safety 1-4

Safety - specific hazards 1-5

Product safety 1-9

...................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements 1-1

Structure of safety statements

Overview

This topic describes the components of safety statements that appear in this document.

General structure

Safety statements include the following structural elements:

Item Structure element Purpose

1 Safety alert symbol Indicates the potential for personal injury

(optional)

2 Safety symbol Indicates hazard type (optional)

3 Signal word Indicates the severity of the hazard

4 Hazard type Describes the source of the risk of damage or

injury

5 Safety message Consequences if protective measures fail

6 Avoidance message Protective measures to take to avoid the hazard

7 Identifier The reference ID of the safety statement

(optional)

SAMPLE

BC D

EF

G

H

Lifting this equipment by yourself can result in injury

due to the size and weight of the equipment.

Always use three people or a lifting device to transport

and position this equipment. [ABC123]

CAUTION

Lifting hazard

Safety statements Structure of safety statements

....................................................................................................................................................................................................................................

1-2 Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Signal words

The signal words identify the hazard severity levels as follows:

Signal word Meaning

DANGER Indicates an extremely hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING Indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE Indicates a hazardous situation not related to personal injury.

Safety statements Structure of safety statements

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements 1-3

Safety

General precautions for installation procedures

WARNING

Failure to observe these safety precautions may result in personal

injury or damage to equipment.

•Read and understand all instructions.

•Follow all warnings and instructions marked on this product.

•Installation and maintenance procedures must be followed and performed by

trained personnel only.

•The equipment must be provided with a readily accessible disconnect device

as part of site preparation.

•Grounding and circuit continuity is vital for safe operation of the equipment.

Never operate the equipment with grounding/bonding conductor

disconnected.

•Install only equipment identified in the product's installation manual. Use of

other equipment may result in an improper connection which could lead to

fire or injury.

•Use caution when installing or modifying telecommunications equipment.

•Before servicing, disconnect power input to reduce the risk of energy

hazards.

•For continued protection against risk of fire, all fuses used in this product

must be replaced only with fuses of the same type and rating.

•Never install telecommunications equipment during a lightning storm or

when conditions are wet.

•Never touch uninsulated wiring or terminals carrying direct current or

ringing current, and never leave this wiring exposed. Protect and tape

uninsulated wiring and terminals to avoid risk of fire, electrical shock, and

injury to personnel.

•Never spill liquids of any kind on the product.

•To reduce the risk of an electrical shock, do not disassemble the product.

Opening and removing covers and/or circuit boards may expose you to

dangerous voltages or other risks. Incorrect reassembly can cause electrical

shock when the unit is subsequently used.

•for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible

disconnect device must be incorporated external to the equipment.

Safety statements Safety

....................................................................................................................................................................................................................................

1-4 Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Safety - specific hazards

DANGER

Electric-shock hazard

Working in severe weather can result in personal injury or death and damage to the

equipment.

Never install or perform maintenance during severe weather (high winds, lightning,

blizzards, hurricane etc.).

DANGER

Noxious-substance hazard

Use of unspecified cleaning agents can result in personal injury.

Use only specified cleaning agents. Never use flammable solvents.

Always ensure there is adequate ventilation in the work area and wear the appropriate

personal protective equipment.

CAUTION

RF hazard

RF exposure in excess of applicable limits can result in personal injury.

Metro Cells are designed and installed in order that they are compliant with the

international exposure guidelines laid down by the International Commission on

Non-Ionizing Radiation Protection (ICNIRP).

For all staff that are required to work in close proximity to the equipment, for example

maintenance personnel, contact with the antenna should be avoided. No such persons

shall stay in front of the product at a distance of less than 8 cm.

No other persons shall stay in front of the product at a distance of less than 22 cm.

Safety statements Safety - specific hazards

....................................................................................................................................................................................................................................

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1 December 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements 1-5

Alcatel-Lucent 9763 Instruction Manual

Popular Wireless Access Point manuals by other brands