Alcatel One touch x060s User manual

User Manual

Table of Contents

Safety and Use...............................................................................................................2

Installation Guide ..........................................................................................................4

Main Interface Overview.............................................................................................4

Entrance to Main Interface.........................................................................................5

Connect to Internet......................................................................................................6

SMS Services (Text Message).......................................................................................7

Contacts.........................................................................................................................8

Settings............................................................................................................................9

Warranty .......................................................................................................................12

FAQs...............................................................................................................................13

Installation Guide for Mac.........................................................................................14

Safety and Use

We recommend that you read this chapter carefully before using your

modem. The manufacturer disclaims any liability for damage, which

may result as a consequence of improper use or use contrary to the

instructions contained herein.

Traffic Safety

When driving, do not use your modem

When switched on, your modem emits electromagnetic waves that

can interfere with the vehicle’s electronic systems such as ABS

anti-lock brakes or airbags. To ensure that there is no problem; do

not place your modem on top of the dashboard or within an airbag

deployment area.

Check with your car dealer or the car manufacturer to make sure

that the dashboard is adequately shielded from modem RF energy.

Conditions of Use

1. Switch the modem off before boarding an aircraft.

2. Switch the modem off when you are in health care facilities, except

in designated areas. As with many other types of equipment now in

regular use, mobile telemodems can interfere with other electrical

or electronic devices, or equipment-using radio frequencies.

3. Switch the modem off when you are near gas or flammable liquids.

Strictly obey all signs and instructions posted in a fuel depot, petrol

station, chemical plant, or in any potentially explosive atmosphere.

4. When the modem is switched on, it should be kept at least 15 cm

from any medical device such as a pacemaker, a hearing aid or

insulin pump, etc.

5. Do not let children use the modem without supervision. Your

modem may contain small parts that could become detached

and create a choking hazard.

6. When replacing the cover, please note that your modem may

contain substances that could create an allergic reaction.

7. Always handle your modem with care and keep it in a clean and

dust-free place.

Do not open, dismantle or attempt to repair your modem yourself.

Do not drop, throw or bend your modem.

Do not paint it.

Collection Point:

This symbol on your modem means that these products must be

taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of

equipment

Collection bins at points of sale.

They will then be recycled, preventing substances being disposed

of in the environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge.

All products with this symbol must be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary

bins if your jurisdiction or your region has suitable recycling and

collection facilities; instead they are to be taken to collection points for

them to be recycled.

In the United States, please visit www.recyclewirelessphones.org for

more information on recycling wireless products.

Protection against theft

Your modem is identified by an IMEI (modem serial number) shown on

the packaging label and in the product’s dashboard. We recommend

that you note the number the first time you use your modem by

opening the dashboard “Settings” > “Diagnostics” to get it.

Disclaimer

There may be certain differences between the user manual description

and the modem’s operation, depending on the software release of

your modem or specific operator services.

Installation Guide

Installation procedures may vary based on the operating system

installed on your PC. The following instructions are based on the

Windows XP OS:

Turn on your PC and plug your modem into the USB interface slot to

begin software installation. Windows should automatically detect the

new device and will prompt you to begin installation.

After following the prompts of installation setup, upon completion, a

shortcut will be placed on your desktop for quick future access.

Note:

1. If installation “auto-run” does not begin, you will need to locate the

“autoRun.exe)” file in the driver path, and Double-Click on

AutoRun.exe to run the installation manually.

2. A Micro-SD card is an optional accessory

3. Please do not remove the USIM/SIM card and or the Micro-SD card

when your modem is in use.

Upon successful installation of the HSPA management program, the

program will launch automatically. You may also double-click the short

cut icon on the desktop to launch the program.

Main Interface Overview

Following table are listed Short Cut Icons in PC Suite Interface.

Interface Icons Provided Services

Home Home Page (Click on <Connect> icon from the

main window to connect/disconnect from the

Internet)

Contacts Display The Phones Book Interface

SMS Display The Text Message Interface

File Manager Open the File Folder of Micro SD Card

Settings Display the Settings manual

Following table are listed the Icons of status bar information

Connection Statistics Icon

Description

Network Signal Indicates the signal strength of the network

Network Status Indicates the network status. This will display the

operator name which the modem can find the

network. Or show the modem haven’t ready.< No

(U)SIM> or <NO Device>

Network Type Display in the status bar, to show you which

network you are using (GPRS / EDGE/ UMTS or

HSPA)

Roaming Roaming Icon “ ”, when the network is under

roaming.

New Message Display the SMS status including new SMS/SIM card

memory is full/Data Card memory is full.

Network Connecting Connecting Icon “ “display in the status bar,

when the network is connected into internet

network. .

Following table are listed the LED Indicates for each status.

LED Indicator Desctiption

Flashing Green & Red multicolour

circularly

Network Searching

Quickly Flashing Green & Red multicolour

circularly

Out of order

Green Light Slow Flashing Registering into HSPA or UMTS network

Constant Green Light Registered to HSPA or UMTS network

Red Light Slow Flashing Registering into GPRS or EDGE network

Constant Red Light Registered to GPRS or EDGE network

Entrance to Main Interface

The application runs automatically and the main window will pop up

when your modem will be connected. You can also access and run the

application from the <Start> menu.

If the PIN code is enabled, please enter the correct PIN code in the

entry field, and click on <OK>. You may try only 3 times to enter the

correct PIN code; after three incorrect attempts, the USIM or SIM card

will be blocked.

A PUK dialog box will then be displayed asking you to enter the right

PUK code, PIN Code and Confirmed PIN. Click on <OK> if you fail to

input the correct PUK code after 10 attempts, you will need to contact

your service provider.

If the PUK and PIN code is correct, the application will be launched and

all features are enabled

Connect to Internet

1. Connecting with the default logon profile

If you want to connect to the Internet without setting any user-defined

or predefined profiles, press icon of “connect”. The default connection

profile will be used in accordance with your USIM/SIM card.

Connecting

yClick on <Connect> from the home page;

yWait several seconds until the connection is established;

yOnce you are connected, Icon of <Connect> will change into

<Disconnect>.

Disconnecting

Click on Icon of <Disconnect> from the home page to disconnect from

the Internet.

2. Connecting with a user-defined logon profile

Click on settle icon and select the <Connection Profile…> menu to

open the profile setting window.

Adding a new connection profile

Click on <Settings> and select the connect Profile to add a new

connection

yIf <ADD> is selected, the new connection profile windows will pop

up.

yPlease enter the info of requested;

yAccount (Connection Naming), Number, APN, User Name,

password and final choice which Auth Type you are using by

manually;

yClick <OK>

yPlease select you preferred network and click on <Activate> to

default your connection setting.

Note：Users may obtain Number, APN Code, User Name, Password and

Authtypeinformationfromnetworksprovider.

SMS Services (Text Message)

Click SMS icon from the main interface of the PC suite to access the SMS

service.

1. Displaying the received SMS

When a new message is received, a message box appears in the status

bar. .

yClick the content of the chosen message. You may also display

the content on the message window.

Note: Received SMS will be saved your modem. If the modem Memory

is full, the message will saved on USIM/SIM

2. New SMS

yClick on <New> in the shortcut menu bar. An SMS creation window

will pop up;

yEnter the text.

3. Send

(1) You may enter a recipient’s number in 3 ways:

yEnter the number directly. If there are two or more recipients, use

“;” to separate each;

yEnter the name of a recipient saved in the phonebook;

yClick Icon of SMS in the pop up the window to access the

recipient’s selection window. Select one party, or more (using the

ctrl/shift key), and the click on <OK> to add the chosen party (ies)

to the recipient list.

(2) Click on <Send> to send the message. If the message is not sent, it

will be saved in the Outbox.

4. Reply

ySelect a message in the inbox and then click on <Reply> in the

shortcut menu bar;

yThe recipient’s / number will appear. It can now be modified;

yEnter the reply in input field, and then click on <Send>.

5. Forward

ySelect a message and then click on <Forward> in the shortcut menu

bar;

yThe content of the selected message will appear in the input field. It

can now be modified;

yEnter the recipient’s number and then click on <Send>.

6. Edit

yAccess the draft list to select a message, and open it by

double-clicking on it;

yClick on <Save> or <Send> when you have finished editing.

7. Delete

ySelect a message, or several messages (using the ctrl/shift key);

yClick on <Delete> in the tool bar. A dialog box will ask “Are you sure

to delete the message(s)?”

yClick on <OK> and the SMS will be deleted. Once deleted, SMS

messages cannot be restored.

8. Resend

yAccess the Outbox to select a message or several messages (using

the ctrl/shift key);

yClick on <Resend> in the tool bar;

yThe application will resend the unsent/sent message(s).

9. Export

ySelect a message or several messages (using the ctrl/shift key) in the

current list;

yThen right click mouse, to export SMS to the chosen location and

saved as a *.txt file.

Contacts

Click contacts from the main interface of PC suite to access the

contacts management.

The contacts list column contains: (U) SIM /Modem /Computer. Your

can use contacts stored either on the (U) SIM, modem or on Computer

in the corresponding window.

1. New

ySelect <New> from the tool bar to access the contacts editor;

yEnter the relevant information, and press <OK>; the new contact will

appear in the current contact list.

2. Edit

ySelect a contact and access the contact editor by selecting <Edit>

from the tool bar or by double-clicking on the contact;

yModify the relevant contact information, and select <OK> to save

the changes.

3. Delete

ySelect one contact, or more (using the ctrl/shift key);

yClick on <Delete> from the tool bar. A dialog box will ask “Are you

sure to delete the contacts?”

yClick on <OK> and the contact(s) will be deleted; deleted contacts

will not be restored.

4. Send SMS

ySelect one contact or more (using ctrl/shift key);

yClick on <Send SMS> in the tool bar;

yWhen the message is completed, you may send it by clicking on

<Send>.

5. Copy to (U) SIM card/Modem/Computer

ySelect one contact, or more (using ctrl/shift key) stored in the same

memory;

yRight-Click your mouse pointer, if selected <Copy to> in the manual

and select a target memory different from the memory being used;

yContact(s) will be copied to the target memory.

Settings

Click on settings icon from the main interface of PC Suite. A menu with

various settings will appear.

1. Network select

ySelect <Network selection> in the Settings menu. The default setting

is<Auto>;

yClick on<Manual…> to activate the network list window;

yA list of networks appears when the search is complete;

yClick <Search> an available network from the list of available

operators and click on <Select>. It will register the selected network.

2. Network mode

ySelect <Network mode> in Settings menu. The default setting is

<Auto>;

yClick on the mode which you prefer, it will search and register the

network mode which was chosen at next time of device

connection.

3. Network Band (This function is depend on product)

ySelect <Network band> in Settings menu. The default setting is

<Auto>;

yClick on the band which you prefer, it will search and register the

network band which was chosen at next time of device

connection.

4. SMS settings

Choose <SMS settings> in the Settings menu to access the SMS settings

window.

a. Service Center: The default number is found in the (U)SIM card. You

may change it.

b. Validity period:- You can choose between: 6 hours/1 day/1 week.

c. Message Alert - Click to validate the message alert sound.

5. Connection profile settings

Select<Connection profile…> in the Settings menu to access the

connection profile setting window.

<ADD>

Adding a new connection profile

Click on <Settings> and select the connect Profile to add a new

connection

yIf <ADD> is selected, the new connection profile windows will pop

up.

yPlease enter the info of requested;

yAccount (Connection Naming), Number, APN, User Name,

password and final choice which Auth Type you are using by

manually;

yClick <OK>

yPlease select you preferred network and click on <Activate> to

default your connection setting.

ySelect an item in the connection profile list;

yClick on <Delete> on the keyboard. You will be asked if you “Are

sure you delete”;

yChoose <OK> to delete the profile from the list.

ySelect an item in the connection profile list;

yClick on <Modify> to access the profile edit window;

yModify the parameters and click on <OK> to save the modification.

ySelect an item in the connection profile list;

yClick on <Deactivate> to release default setting

6. System settings

Click to validate the sound prompt when the Internet will be

connected/ disconnected.

7. Request PIN

yClick on the <Request PIN> menu and select <Enable/Disable PIN>.

Activate the PIN input dialog box;

ySelect <Enable PIN> and Enter the correct PIN code;

yClick on <OK>.

8. Change PIN

yClick on <Change PIN>, and activate the PIN modify dialog box;

yInput the old PIN and the new PIN, then confirm;

yClick on <OK> to confirm the new PIN code

Note: You can only access the modify menu if the PIN is enabled.

9. Unlock (U) SIM Card

Click on <(U)SIM Unlock>, and activate the code which is requested in

dialog box to unlock this function, Then click on <OK> to confirm;

Note: All about code is supplied by your network provider (except PIN

Code).

10.Diagnostics Statistic

yThis menu is used to display the diagnostic information, including:

yModel Information: Modem Name/ Firmware version/IMEI/IMSI

yOperator Information: PIN code status/Network code/Network

selection mode/ Network mode/Signal strength.

yNetwork Status: CS network registration/PS network registration/PS

network attachment

11. About

You can get information on the version in the <About> menu.

12.Help

When the application is open, you can read the instructions about

Modem

Warranty

•Your modem is warranted against any deviation from technical

specifications for a period of twelve (12) months from the date

specified on your original invoice1.

•Under the terms of this warranty, you must immediately inform your

vendor in case of a conformity defect on your modem, and present

the invoice given to you at the time of purchase;

•The vendor or repair centre will decide whether to replace or repair,

as appropriate your modem;

•Repaired or replaced modems are warranted ONE (1) month unless

there are statutory provisions to the contrary.

•This warranty shall not apply to damage or defects to your modem

due to:

1) not following of the instructions for use or installation,

2) not being compliant with technical and safety standards

applicable in the geographical area where the your modem is

used,

3) improper maintenance of sources of energy, and of the overall

electric installation,

4) accidents or consequences of theft of the vehicle in which the

modem is transported, acts of vandalism, lightning, fire, humidity,

infiltration of liquids, inclement weather,

5) connecting to or integrating into the modem any equipment not

supplied or not recommended by the manufacturer,:

6) any servicing, modification or repair performed by individuals not

authorised the manufacture, the vendor or the approved

maintenance centre,

7) use of the your HSPA modem for a purpose other than that for

which it was designed,

8) normal wear,

9) malfunctions caused by external causes (e.g., radio interference

from other equipment, power voltage fluctuations),

10) faulty connections resulting from unsatisfactory radio transmission or

1The mandatory warranty period may vary if overriding statutory provisions are applicable in your jurisdiction

caused by the absence of radio relay coverage.

•Warranty is also excluded for your modem on which markings or

serial numbers have been removed or altered.

•Your modem is also warranted against hidden defects (defects

inherent in the design, manufacture, etc.).

•There are other express warranties than this printed limited warranty,

express or implied, of any nature whatsoever.

•In no event shall the manufacturer be liable for incidental or

consequential damages of any nature whatsoever, including but

not limited to trading loss, commercial loss, to the full extent those

damages can be disclaimed by law. Some countries/states do not

allow the exclusion or limitation of incidental or consequential

damages, or limitation of the duration of implied warranties, so the

preceding limitations or exclusions may not apply to you.

FAQs

1. Q: Which operation systems does the software support?

A: It supports Windows 2000, Windows XP, Windows Vista and Mac

OS.

2. Q: I cannot install the driver

A: On some PCs, installation of the driver may take a long time

because of the PC configuration. So please wait and do not

cancel the process or you will have to uninstall and re-install

again.

3. Q: What should I do if the main interface continues to display

“Searching device”<”Initializing”>?

A: Please remove the device and reinsert it.

4. Q: What should I do if the SIM/USUM card is unplugged during the

application?

A: Please disconnect the device first, and then restart the

application.

5. Q: The SIM/USIM card does not register any networks

A: The reasons are shown below:

1. Unstable local signal;

2. The software is an old version;

3. Hardware problem.

Youmay:

1. Try to logon from another location;

2. Update the software;

3. Check the hardware or use another data card and retry.

6. Q: Why does the prompt “ No available connection profile. Please

set an available default one in connection profile.”appear?

A: Please add a connection profile manually.

7. Q: It failed to connect to the internet

A: Please make sure the connection profile and settings are correct.

8. Q: The connection speed and data transfer rates are too slow

A: Please check the local network signal strength.

9. Q: Sending an SMS failed

A: Please make sure the SMS center number is correct.

10.Q: I cannot receive an SMS

A: Please check whether your SIM/USIM card’s memory is full.

11.Q: Why can I only save part of the name when adding a new

contact?

A: The SIM/USIM card can only hold 12 SBC characters, and 6 DBC

characters.

12.Q: Does it support roaming?

A: This depends on the local operator. Please check with your local

operator or service provider.

Installation Guide for Mac

This manual describes the operations of the connect application.

This application requires MAC OS X10.4.9 or later.

1. To install the HSPA USB MODEM connect application on MAC OS X.

Please double-click the file HSPA USB MODEM.pkg

2. Click Continue

3. Select the MAC OS volume to install the application and click

“Continue Installation”

4. When the installation is finished, you will see the following window,

you need to restart your computer to use the modem.

5. Clicking Application>HSPA USB MODEM to start the connect

application. You may install this application in the Dock to access it

faster.

One Touch X060

Production Characteristic

-Zero CD ROM, Auto Installation

-UMTS 850/1900/2100 MHz

-Downlink upto 3.6Mpbs,

-Micro SD upto 16GB

-SMS

-Support Window 2000/XP/Vista; Mac OS X10.4.9

Your modem is a transceiver that operates on GSM networks with 850, 900, 1800 and

1900 MHz and on WCDMA 850, 1900 and 2100 MHz bands.

Radio Waves:

Federal Communications Commission Notice (United States):

The SAR limit set by public authorities such as the Federal Communications

Commission of the US Government (FCC), or by Industry Canada, is 1.6 W/kg

averaged over 1 gram of body tissue. The highest tested SAR value for this device

compliance against the standard is 1.09 W/kg.

Although the SAR is determined at the highest certified power level, the actual SAR

Level of the modem while operating can be well below the maximum value. This is

because the modem is designed to operate at multiple power levels so as to use only

the power required to reach the network. In general, the closer you are to a wireless

base station antenna, the lower the power output of the modem.

While there may be differences between SAR levels of various modems and at various

positions, they all meet the government requirement for RF exposure. The modem

meets FCC RF exposure guidelines provided that it is used with this device at least

0.5cm form the body.

The World Health Organization (WHO) considers that present scientific information

does not indicate the need for any special precautions for use of modem. If

individuals are concerned, they might choose to limit their own or their children’s RF

exposure by limiting the length of use to keep data card away from the head and

body. (fact sheet n°193) Additional WHO information about electromagnetic fields

and public health are available on the following website:

http://www.who.int/peh-emf.

Note: Although no danger relating to the use of modem was ever proved, the world health

Organisation advises as a precautionary measure to use the modem in a good way. It is also

advised to keep the modem away from the belly of pregnant women and from the lower

abdomen for teenagers.

-----------------------------------------------------------------------------------------------------------------

Note: Your modem has been tested and found to comply with the limits for a Class B

digital device pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

Your Modem generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference to radio or television reception, which can be determined by

turning your modem off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between your modem and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

General Information

* Internet address: www.alcatel-mobilephones.com

* Customer Support / Hot Line Number: see “TCT Mobile Services” leaflet or go to our

Internet site.

Do not allow your modem to be exposed to adverse weather or environmental conditions

(moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s

recommended operating temperature range is -20°C to +55°C

As mobile devices offer a range of functions, they can be used in positions other than

against your ear. In such circumstances the device will be compliant with the guidelines

when used with HSPA Modem. If you are not using HSPA Modem ensure that whatever

product is used is free of any metal and that it positions the phone at least 2cm away from

the body.

Your modem is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC. The entire copy of the Declaration of Conformity for your

modem can be obtained through our Website: www.alcatel-mobilephones.com.

One Touch X060A

Production Characteristic

-Zero CD ROM, Auto Installation

-UMTS 850/1900 MHz

-Downlink upto 3.6Mpbs,

-Micro SD upto 16GB

-SMS

-Support Window 2000/XP/Vista; Mac OS X10.4.9

Your modem is a transceiver that operates on GSM networks with 850, 900, 1800 and

1900 MHz and on WCDMA 850 and 1900 MHz bands.