alfresia JC10202011 User manual

Java Conservatory Chair
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JC10202011
For further assistance, other products and more, join
us at:
Website: www.alfresia.co.uk
Instagram: @alfresiauk
Facebook: www.facebook.com/alfresia

1
Thank you for choosing our Alfresia Java Conservatory Chair. Please
read this user manual carefully and keep it for future reference. If you
need any assistance, please contact our customer service team on the
details provided on the back page of this manual.
Components Supplied
Please check the list of supplied items which correspond to the numbered
diagrams below:
Please ensure that you have received all of the above items and check
for any damages before use. If you find any damages, please contact our
customer services department.

2
Assembly Instructions
1. Assemble the main seat of the unit using pieces (A), (B), (C) and (D) and the
(E) fixture and Allen key provided as shown in the diagram below. Insert the
wooden dowels (G) into the screw holes once you have finished construction of
the seat:
2. After this, place the seat pad (H) onto the supports as shown in the diagram
below:

3
3. Your assembled product should look as below and you can now place your
conservatory cushions onto the frame:
Assembly Notes
Assemble on a soft, clean surface to avoid damaging or marking the
pieces
Do not use if any parts are missing, damaged or worn
Do not use if any of the fixings or fittings are not secure
Always place this (product name) on a flat, level surface before use
Always use the product for its intended purpose. Misuse of the product
could cause injury
Care & Maintenance
To clean, wipe down the surfaces with a soft damp cloth and a small
amount of mild detergent. Do not immerse in water.
Periodically check that all of the screws and fixings are secure and tighten
if necessary

Guarantee
Our products are guaranteed for a period of 2 years from the date of purchase. Products
that develop a fault within this period are covered by our warranty and we will replace
defective parts, or where not available the whole product. The warranty does not apply to
any defect in the goods arising from fair wear and tear, wilful damage, accident,
negligence by you or any third party, use otherwise than as recommended by us, failure
to follow our instructions, any alteration or repair carried out without our approval or has
been the subject of commercial use. Your statutory rights remain unaffected, in particular
any rights you have under the Consumer Rights Act 2015.
If you have a problem with your product within this warranty period please contact our
customer services team.
In the event of changes to the specification of a product and we are not able to replace
parts, we will replace the whole product within the 2 year guarantee period
For products that fall outside of the 2 year guarantee, we will endeavour to provide spare
parts to purchase for as many of the replaceable parts as possible, but cannot foresee
specification changes or upgrades to products or parts outside of the initial 2 year period.
Customer Services:
If you would like further advice or information on your product, ensure you have the SAP
code ready and please get in touch with us at Alfresia on the contact options below:
SAP Code: JC10202011
Phone: [phone] (Mon –Fri 9am to 5pm)
Email: [email protected]
UK Address: Alfresia, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale, OL16 1TA
EU Address: Alfresia, Delu-Ako Minky GmbH, Hauptstraße 103, 53619, Rheinbreitbach,
Germany