Allen + Roth 42622 User manual
1
RATED FOR
DAMP
LOCATIONS
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also
ATTACH YOUR RECEIPT HERE
Purchase Date _________________________
ITEM #
5024108
WALL SCONCE
MODEL #
42622
Español p. 13
AS22258
welcoming • sophisticated • inspiring
ALLEN + ROTH and logo design are
trademarks or registered trademarks of LF, LLC.
All rights reserved.
2
TABLE OF CONTENTS
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparation ......................................................................3
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly Instructions for Plug-in Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly Instructions for Hardwire Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1-Year Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
33
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Fixture 1
B Metal Shade 1
C Socket Ring 1
D Switch (preassembled to Fixture [A]) 1
E Wall Plate (preassembled to Fixture [A]) 1
F Mounting Screws (preassembled to Wall Plate [E]) 3
G Power Cord (preassembled to Fixture [A]) 1
H Plug (preassembled to Power Cord [G]) 1
I Grommet (preassembled to Fixture [A]) 1
A
B
D
F
I
E
H
G
HARDWARE CONTENTS
Mounting Bracket
Qty. 1
Mounting
Bracket Screw
Qty. 2
Plug Button
Qty. 1
Anchor
Qty. 2
Anchor Screw
Qty. 2
FF AG
RR EE AH
PREPARATION
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included):
1/4”
Helpful Tools (not included)
(not drawn to scale)
(for hardwire installation) (for plug-in installation)
C
7mm
4
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
or even fatal.
•
the circuit breakers.
• The net weight of the light kit is 2.2 lb.
•
DANGER:
•
•
•
permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire
WARNING:
• All electrical connections must be in agreement with local codes and ordinances, the National
Electric Code (NEC) and ANSI/NFPA 70-1999. Contact your municipal building department to learn
•
edges.
•
•
outlet box. If there are three or more wires to connect or any of the wires is larger than 18 gauges,
5
ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION
1.
supply line leads.
DANGER: Failure to disconnect the power
or death.
2.
next step.
INSTALLATION, page 8. Note: Hardwire installation
requires an outlet box at the installation location.
3.
(A) making sure you have access to an electrical
outlet and there are no electrical lines or plumbing
where you intend to attach the mounting hardware.
Mark the anchor (AG) locations on wall and drill each
hole 7 mm in diameter. Insert the anchors (AG) and
set two screws (AH) into the anchors (AG) leaving
enough exposed to set into the keyhole slots on the
preassembled wall plate (E).
Hardware Used
AG Anchor x 2
Anchor Screw x 2
1
2
Plug-in Hardwire
3
AG
AH
AH
6
ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION
4. Align the keyhole slots on the wall plate (E) with the
screws (AH) on the wall and then gently push the wall
plate (E) against the wall and slide down until secure.
5. Remove the socket ring (C) preassembled to the
secure by reinstalling the socket ring (C) onto the
socket.
6. Install medium-base (E26) bulb (sold separately) in
Important:
(A) to cool before you replace the bulb.
Assembly is complete.
Turn ON the electrical power at the main fuse or
circuit breaker.
5
4
B
C
A
AH
E
6
Bulb (sold
separately)
A
7
ASSEMBLY INSTRUCTIONS FOR PLUG-IN INSTALLATION
7. Insert plug preassembled to power cord (G) into
nearby electrical outlet and move switch on underside
8. The direction of the metal shade (B) can be changed
. Note: Metal shade may
get hot during operation. Ensure the shade is cool
Switch
7
G
A
8
B
8
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
1.
supply line leads.
DANGER: Failure to disconnect the power
or death.
2.
the next step. Note: Hardwire installation requires an
outlet box at the installation location.
INSTALLATION, page 5.
3. To remove the wall plate (E) from the back of the
plate (E) will not be used for hardwire installation.
1
2
Plug-in Hardwire
3
A
E
F
9
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
4. Remove the socket ring (C) preassembled to the
secure by reinstalling the socket ring (C) onto the
socket.
the mounting bracket (FF) to the outlet box (sold
separately). Note: Ensure two mounting bracket tabs
Hardware Used
FF Mounting
Bracket x 1
Mounting
Bracket Screw x 2
6. Loosen the ground screw preassembled to the
mounting bracket (FF). Wrap the green/bare (ground)
supply wire from the outlet box around the ground
screw. Tighten the ground screw to secure the ground
wire.
4
6
RR
FF
FF
5
Ground Screw
Ground Wire
Outlet
Box
Tab
RR
B
C
A
10
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
locate the two wires extending from the power
cord (G). Lift the lever on the wire connectors
plug wire. Once both wires of the power cord (G) are
released, pull it through the grommet (I) at the bottom
8. Remove the hex nut preassembled to plug button
(EE). Then insert the plug button (EE) through
grommet (I) and secure with the hex nut.
Hardware Used
EE Plug Button x 1
9. Make the following wire connections using the wire
• Push the Bare/Green (ground) supply wire into the
empty wire hole of the wire connector preassembled
to the Copper wire. Lower the lever to secure.
• Push the White (neutral) supply wire into the empty
wire hole of the wire connector preassembled to the
White wire. Lower the lever to secure.
• Push the Black (hot) supply wire into the empty
wire hole of the wire connector preassembled to
the Black wire from the switch. Lower the lever to
secure.
Note:
colors than referred to above, it is recommended a
professional electrician determines the proper wiring.
9
8
White
(neutral)
White
Black
Black
(hot)
Copper
Outlet
Box
Hex Nut
Bare/Green
(ground)
7
A
EE
I
Lever
G
I
A
11
12
11
Bulb (sold
separately)
10
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
10.
the three holes in the tabs on the mounting bracket
(FF). Then use the three previously removed mounting
(FF).
11. Install medium-base (E26) bulb (sold separately) in
Important:
(A) to cool before you replace the bulb.
Assembly is complete.
Turn ON the electrical power at the main fuse or circuit
breaker.
Switch
Hole
Tab
A
A
A
F
FF
12
TROUBLESHOOTING
ONE-YEAR LIMITED WARRANTY
for one (1) year from the date of purchase. If within this period the product is found to be defective,
take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place
of purchase. The manufacturer will, at its option, repair, replace or refund the purchase price to the
damages. As some states do not allow exclusions of limitations on an implied warranty, the above
other rights which may vary from state to state.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulb will not light. 1. Fixture may be wired
incorrectly.
2. Worn or broken bulb.
1. Check wiring.
2. Replace bulb.
3. Ensure switch is in ON
position.
Printed in China
9791 PB · 050722
ASSEMBLY INSTRUCTIONS FOR HARDWIRE INSTALLATION
13. The direction of the metal shade (B) can be changed
using the hinges. Note: Metal shade may get hot
during operation. Ensure the shade is cool before
13
B
This manual suits for next models
1
Table of contents
Other Allen + Roth Outdoor Light manuals
Allen + Roth
Allen + Roth 30442 User manual
Allen + Roth
Allen + Roth PL1588 User manual
Allen + Roth
Allen + Roth LB4056 User manual
Allen + Roth
Allen + Roth 42623 User manual
Allen + Roth
Allen + Roth 41997 User manual
Allen + Roth
Allen + Roth 42626 User manual
Allen + Roth
Allen + Roth LW503014 User manual
Allen + Roth
Allen + Roth OT-8S023X User manual
Allen + Roth
Allen + Roth LWS1176E User manual
Allen + Roth
Allen + Roth LB2901 User manual
Allen + Roth
Allen + Roth 42620 User manual
Allen + Roth
Allen + Roth 30427 User manual
Allen + Roth
Allen + Roth RDY1740-01-ORB User manual
Allen + Roth
Allen + Roth LWS1176C User manual
Allen + Roth
Allen + Roth 42619 User manual
Allen + Roth
Allen + Roth EFL07PB User manual
Allen + Roth
Allen + Roth LB4466 User manual
Popular Outdoor Light manuals by other brands
LIGMAN
LIGMAN PRAGUE 6 installation manual
Visual Comfort & Co.
Visual Comfort & Co. Cleo KW 1088 Assembly instructions
Original BTC
Original BTC Davey Lighting 7684 instruction manual
Quoizel
Quoizel BST8407MB installation guide
Quoizel
Quoizel RAV8410WT Assembly instruction sheet
Philips
Philips hue Calla user manual
RAB Lighting
RAB Lighting LOTBLASTER 65W installation instructions
Quoizel
Quoizel NY8339K Assembly instruction sheet
DS Produkte
DS Produkte GA-TS0006-01 instructions
Clas Ohlson
Clas Ohlson 31-4656 quick start guide
RAB Lighting
RAB Lighting LFLED4LV installation instructions
Hubbell
Hubbell Dual-Lite PGN Installation, operation and service instructions
