Alliance Laundry Systems AR105M X CONTROL Owner's manual

Installation/Operation/Maintenance
Washer-Extractors
Commercial Hardmount
Refer to Page 11 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com Part No. D1599ENR16
November 2023

Table of Contents
Safety Information..................................................................................5
Explanation of Safety Instructions Messages..................................................... 5
Important Safety Instructions........................................................................... 5
Introduction..........................................................................................11
Model Identification......................................................................................11
Serial Plate Location .................................................................................... 16
Manufacturing Date...................................................................................... 16
Delivery Inspection....................................................................................... 17
Specifications and Dimensions.............................................................. 18
General Specifications...................................................................................18
Machine Dimensions.....................................................................................24
Mounting Bolt Hole Locations....................................................................... 26
Floor Mounting Layout................................................................................. 28
Installation........................................................................................... 30
Pallet Removal............................................................................................. 30
Machine Installation......................................................................................31
Machine Foundation and Pad Installation.....................................................31
Machine Installation on Floor or Steel Base................................................. 33
Machine Grouting (North American Models Only).......................................36
Drain Connection..........................................................................................37
Drain Valve...............................................................................................37
Drain Pump, 7.5 kg / 20 lb. / 75 L Models outside of North America .............40
Water Connection Requirements.....................................................................42
Connecting Hoses......................................................................................44
Water Reuse System ................................................................................. 46
Reused Water Treatment............................................................................ 46
Water Reuse Tank Properties...................................................................... 46
Electrical Installation Requirements................................................................47
Residual Current Device (RCD) - Models Outside of North America............. 48
Supply Protection Device...........................................................................48
Supply Cable............................................................................................ 49
Machine Protective Earth Connection and Equipotential Bonding.................. 50
Input Power Conditioning..............................................................................51
Input Voltage Requirements........................................................................51
Circuit Breakers and Quick Disconnects......................................................... 51
Connection Specifications..............................................................................51
Single-Phase Connections ......................................................................... 51
Three-Phase Connections........................................................................... 53
© Copyright 2023, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed
written consent of the publisher.
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
3 Part No. D1599ENR16

Phase Adder..............................................................................................53
Voltage Settings.........................................................................................53
Thermal Overload Protector....................................................................... 54
Electrical Specifications - Models Outside of North America ........................55
Electrical Specifications - North American Models.......................................65
Steam Requirements (Steam Heat Option Only)...............................................66
Steam Valve Installation.............................................................................67
Chemical Injection Supply System................................................................. 67
Connection of External Liquid Supplies.......................................................... 68
Electrical Connection of External Liquid Soap Supply System.......................... 68
External Wait Control....................................................................................68
Chemical Soap Supply System....................................................................... 68
Operation............................................................................................. 70
Operator Daily Maintenance Checks...............................................................70
Operating Instructions................................................................................... 70
Before Washing............................................................................................ 71
Power Cut.................................................................................................... 71
Automatic Door-lock Unlocking Module ........................................................71
Maintenance......................................................................................... 72
Maintenance ................................................................................................72
Daily........................................................................................................... 72
Beginning of Day...................................................................................... 72
End of Day............................................................................................... 72
Quarterly......................................................................................................72
Every 6 Months............................................................................................ 73
Emergency Unblocking of Door Lock.............................................................73
Care of Stainless Steel................................................................................... 74
Disposal of Unit.................................................................................... 75
Disconnecting the Machine............................................................................75
Disposal of Unit............................................................................................75
China Restriction of hazardous substances (RoHS)............................... 76
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
4 Part No. D1599ENR16

Safety Information
Explanation of Safety Instructions
Messages
Precautionary statements (“DANGER,” “WARNING,” and
“CAUTION”), followed by specific instructions, are found in this
manual and on machine decals. These precautions are intended
for the personal safety of the operator, user, servicer, and those
maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if
not avoided, will cause severe personal injury or
death.
WARNING
Indicates a hazardous situation that, if not avoided,
could cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided,
may cause minor or moderate personal injury or
property damage.
Additional precautionary statements (“IMPORTANT” and
“NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used to in-
form the reader of specific procedures where minor
machine damage will occur if the procedure is not fol-
lowed.
NOTE: The word “NOTE” is used to communicate in-
stallation, operation, maintenance or servicing informa-
tion that is important but not hazard related.
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
5 Part No. D1599ENR16

Important Safety Instructions
WARNING
Read all the instructions before using the ma-
chine. Safe these Instructions for future reference.
Electrical shock prevention
DANGER
Electrical shock hazard will result in death or serious
injury.
Before inspecting, maintenance or servicing ma-
chines, power supply must be turned OFF. The serv-
icer needs to wait for at least ten (10) minutes after
turning the power OFF.
This machine must be connected to a grounded met-
al, permanent wiring system, and an equipment
grounding conductor must be run with the supply
conductors and connected to the equipment ground-
ing terminal on the machine.
When the main switch is turned off, the inlet termi-
nals of the main switch are still under current.
The inverter remains charged with high voltage for
some time after powering OFF. Before starting in-
spection of the inverter, check for residual voltage
across main circuit terminals “ + “ and “ - “. This
voltage must be below 30 VDC before the servicer
can access the inverter for inspection.
Do NOT connect inverter manufacturer devices or
other devices to the frequency controller to manipu-
late the behavior. No modification to the settings are
allowed.
This is an imminently hazardous situation that, if not
avoided, will cause severe personal injury or death.
Installation – Maintenance prevention
WARNING
Machine installations must comply with minimum
specifications and requirements stated in the appli-
cable Installation Manual, any applicable municipal
building codes, water supply regulations, electrical
wiring regulations and any other relevant statutory
regulations. Due to varied requirements and applica-
ble local codes, this machine must be installed, ad-
justed, troubleshooting and serviced by qualified
maintenance technician which is familiar with the ap-
plicable local codes and the construction and opera-
tion of this type of machinery. They must also be fa-
miliar with the potential hazards involved. Failure to
observe this warning may result in personal injury
and/or property damage.
Always verify the static and dynamic requirements
with a building engineer to meet the requirements of
the permissible loads, vibrations and noise level of
the building.
Ensure and install the machine on a level floor of
sufficient strength. Ensure that the recommended
clearances for inspection and maintenance are pro-
vided. Never allow the inspection and maintenance
space to be blocked.
To reduce the risk of fire, this appliance must be in-
stalled and secured to an uncovered not obstructed
concrete floor.
If a forklift or a pallet truck is used to transport or in-
stall the machine, ensure that the carrying capacity
and the forks length are sufficient. By given center of
gravity, pay the necessary attention to the distribu-
tion of the center of gravity by lifting and transport.
In case the machine needs to be anchored, do not
tighten nuts of the anchoring bolts before the con-
crete base around the bolts is completely hardened.
The bolts must be tightened by means of torgue
wrench.
Do not install the machine over an open water stor-
age or drain system.
Adequate ventilation must be provided to avoid the
back flow of gases into the room from appliances
burning other fuels.
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
6 Part No. D1599ENR16

WARNING
ALWAYS disconnect the machine from Electrical
power, Water, Steam and all other connected sup-
plies during installation, before attempting any serv-
ice, replacing parts and maintenance.
If the machine is not equipped with means to isolate
them from all energy sources (e.g. water, electricity,
steam, compressed air), than such means must be
part of the fixed installation external to the machine.
Such isolators shall be clearly identified. They shall
be capable of being locked if reconnection could en-
danger persons.
After the energy source is disconnected, follow the
install procedure to safely, dissipate any remaining
or stored energy in the circuits of the machine.
Use machine only for its intended purpose, suitable
laundry textiles. Never wash/dry/iron something else
like polymers, machine parts, automotive parts or
other ferro materials in the machine. This could re-
sult in serious injury and machine damage.
In case the machine is provided with shipping bra-
ces, they must be removed prior to putting into serv-
ice. See Install instruction for safely remove them.
Sharp edges can cause personal injury. Wear safety
glasses and gloves, use proper tools and provide
lighting when handling sheet metal parts.
WARNING
Failure to do so may result in conditions which can
produce serious injury, death and/or property dam-
age.
WARNING
The washer is provided with Air vents wherefrom Va-
pors can escape! Do not connect or cover them!
Automatic door-lock unlocking devices must not be
utilized or installed on machines that are fitted with a
drain pump or reverse function drain valve.
The new hose sets supplied with the appliance are to
be used. Old hose sets should not be reused.
Electrical - Energy Prevention
WARNING
Machine must be hard-wired. Use copper conductors
only.
Refer to the Earthing (grounding) instructions in the
INSTALLATION manual for the proper grounding of
the machine. In event of malfunction, breakdown or
leakage current, grounding will reduce the risk of
electrical shock and serve as a protecting device by
providing a path of least resistance of electrical cur-
rent. Therefore, it is very important, and the respon-
sibility of the qualified installer to ensure the ma-
chine is adequately grounded at installation, follow-
ing all the national and local requirements.
If there are other washers or appliances with ex-
posed conductive parts, which can touch simultane-
ously, make sure to make equipotential bonding be-
tween all these appliances. The external protective
terminal for this purpose is located on the rear side
of the machine frame. The minimum protection con-
ductor's cross section depends on the supply cable
cross section of the appliance of the highest current
rating.
An individual branch circuit needs to be used for
each machine.
If the machine is not equipped with a supply mains
disconnecting device, means for disconnection all
poles must by incorporated in fixed wiring in accord-
ance with overvoltage category Ill conditions and the
relevant local wiring rules and must be located so
that it is easily accessible with the machine in place.
If disconnection is foreseen by means of a plug, it
must be placed and installed in such a way that an
operator can check from any of the points to which
he has access, that the plug remains removed. If this
is not possible, due to its installation, a disconnec-
tion with a locking system in the isolated position
shall be provided.
Dangerous voltages are present inside the machine.
Disconnect power from the machine before remov-
ing any cover and guards, and before attempting any
maintenance, troubleshooting or service procedures
or replacing parts.
To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to connect
the machine to the electrical power source.
The machine is not designed for use in IT networks.
Applicable measures need to be provided.
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Part No. D1599ENR16

Use Limitation
WARNING
The machine cannot used by children aged under 8
years.
This appliance cannot be used by children aged from
8 and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge, unless they have been given super-
vision and instruction concerning use of the ma-
chine in a safe way and understand the hazard in-
volved, by a person responsible for their safety.
Children should be supervised to ensure that they
do not play on, in or with the machine. Close super-
vision of children is necessary when the machine is
used near children.
Cleaning and maintenance shall not be made by chil-
dren.
Operation Prevention
WARNING
Never operate the machine with any guards, panels
and/or parts removed or broken. Do NOT bypass any
safety devices or tamper with the controls.
Safety decals appear at crucial locations on the ma-
chine. Failure to maintain legible safety decals could
result in injury to the operator or service technician.
Use only authorized spare parts in the event of fail-
ure. Do not repair or replace any part of the machine
or attempt any servicing unless specifically recom-
mended in the user-maintenance instructions or in
published user-repair instructions that the user un-
derstands and has the skills to carry out.
If the supply cord is damaged, it must be replaced by
a qualified technician to avoid a hazard.
Never touch internal or external steam pipes, con-
nections, or components. These surfaces can be ex-
tremely hot and will cause severe burns. The steam
supply must be turned off and allow the pipe, con-
nections and components to cool before these can
be touched.
Avoid contact with hot inlet water temperatures high-
er than 125° Fahrenheit [51°C] or hot surfaces.
WARNING
Never interfere with the setting of the door handle.
Never try to modify the setting or repair the handle!
Any interference with its setting may lead to serious
risk for the operator! A damaged or incorrectly func-
tioning door handle must always be immediately re-
placed with a new original part by qualified person-
nel.
Loading door must be closed any time the machine
is operating.
Do NOT attempt to open the door until the machine
has drained and all moving parts have stopped. NEV-
ER insert hands or objects into basket until it has
completely stopped.
Do NOT bypass the door protections that prevent the
machine from operating with the loading door open.
Operating the washer with severe out-of-balance
loads could result in personal injury and serious
equipment damage.
Before using the emergency door opening function,
turn off the machine's main switch. Never open the
door while the basket is still running or if the ma-
chine parts feel too warm or if "Too hot" is indicated.
Always wait to open the door until there is no water
in the drum.
WARNING
If the washer is fitted with an automatic unlocking
device, to unlock the door after a power disconnect,
wait until the circuit unlocks the doorlock. Before
open the door makes sure that the basket is com-
pletely stopped and the water has drained.
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
8 Part No. D1599ENR16

Injury Prevention
WARNING
To reduce the risk of fire, electric shock, or in jury to
persons when using your machine, follow these pre-
cautions, including the following:
• Do not install or store the washer where it will be
exposed to water and/or weather conditions.
• To prevent fire and explosion, keep the area
around machine free from flammable and com-
bustible products. Do not add the following sub-
stances or textiles containing traces of the follow-
ing substances to the wash water: gasoline, kero-
sene, waxes, cooking oils, vegetable oils, ma-
chine oils, dry-cleaning solvents, flammable
chemicals, thinners, or other flammable or explo-
sive substances. These substances give off va-
pors that could ignite, explode or cause the fabric
to catch fire by itself.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing
machine or combination washer-dryer, turn on all
hot water faucets and let the water flow from each
for several minutes. This will release any accumu-
lated hydrogen gas. The gas is flammable, do not
smoke or use an open flame during this time.
• Use only low-sudsing, no-foaming types of deter-
gents. Be aware that hazardous chemicals may be
present. Wear hand and eye protection when han-
dling detergents and chemicals. Always read and
follow manufacturer's instructions on packages
of laundry and cleaning aids. Read all warnings or
precautions. To reduce the risk of poisoning or
chemical burns, always keep them out of the
reach of children [preferably in a locked cabinet].
WARNING
• Do not use fabric softeners or products to elimi-
nate static unless recommended by the manufac-
turer of the fabric softener product.
• Always follow the fabric care instructions sup-
plied by the textile manufacturer.
• If the machine is provided with a bath sample tap,
be careful by taking the sample to avoid injuries
by hot water or chemicals.
• Do not climb or stand on the washer, do not reach
or climb into the drum.
• Do not push, pull or press on the enclosure, its
corners or on protruding parts of the contour line
of the machine.
• Never put fingers between door sealing and drum
by manipulating or closing the door.
• Be aware that water is used to flush the supply
dispenser. Avoid opening the dispenser lid while
the machine is running.
• Do not attach anything to the supply dispenser's
nozzles, if applicable. The air gap and overflows
must be maintained.
WARNING
• Do not operate the machine without the water re-
use plug or water reuse system in place, if appli-
cable.
•Be sure that fill hose connections are tight.
CLOSE the shut-off valves at the end of each
wash day.
• Keep the washer in good condition. Bumping or
dropping the washer can damage safety features.
If this occurs, have the washer checked by a
qualified service person.
• Before the washer is removed from service or dis-
carded, remove the door from the tub assembly
and in case present, the washing compartment.
Secure door and glass to prevent breaking and in-
jury of by sharp edges.
• To avoid machine corrosion and component fail-
ure, do not use corrosive chemicals in the ma-
chine. The use of hypochlorite will cause corro-
sion which may cause component failure under
certain circumstances.
• Always contact your dealer, distributor, service
agent or the manufacturer on any problems or
conditions you do not understand.
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. D1599ENR16

Operation Prevention
CAUTION
Machines referred to by model in this manual are
NOT intended for domestic use by private consum-
ers in the home environment. Machines referred to
by model in this manual are intended to be used by
the general public in applications such as:
• Staff kitchen areas in shops, offices, kitchens and
other working environments
• Farmhouses, bed and breakfast type environ-
ments
• By clients in hotels, motels and other residential
type environments
• Areas for communal use in blocks of flats or in
launderettes
• any other similar applications
IMPORTANT: Models outside of North America : All ma-
chines are produced in according to the EU EMC direc-
tive (Electro-Magnetic-Compatibility). They can be used
in restricted surroundings only (comply minimally with
class A requirements). For safety reasons there must
be kept the necessary precaution distances with sensi-
tive electrical or electronic device(s).
IMPORTANT: The IMPORTANT SAFETY INSTRUC-
TIONS appearing in this manual are not meant to cover
all possible conditions and situations that may occur.
Observe and be aware of other labels and precautions
that are located on the machine. They are intended to
provide instructions for safe use of the machine. Com-
mon sense, caution and care must be exercised when
installing, maintaining, or operating the machine.
NOTE: If literature or replacement parts are required,
contact the source from which the machine was pur-
chased or contact Alliance Laundry Systems at +1
[phone] for the name and address of the nearest
authorized parts distributor.
NOTE: For technical assistance, contact your local dis-
tributor or contact:
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, WI 54971-0990 U.S.A.
www.alliancelaundry.com
Phone: [phone]
Safety Information
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
10 Part No. D1599ENR16

Introduction
Model Identification
Information in this manual is applicable to the following models:
AR105M_X_CONTROL PA20_X_CONTROL LAC080T LAU332X
AR105M_X_CON-
TROL_PLUS
PA20_X_CONTROL_PLUS LAC080X LAU520T
AR105N_X_CONTROL PA25_X_CONTROL LAC105T LAU520X
AR105N_X_CON-
TROL_PLUS
PA25_X_CONTROL_PLUS LAC105X LAX080T
AR135M_X_CONTROL PA30_X_CONTROL LAC135T LAX080X
AR135M_X_CON-
TROL_PLUS
PA30_X_CONTROL_PLUS LAC135X LAX105T
AR135N_X_CONTROL PA40_X_CONTROL LAC180T LAX105X
AR135N_X_CON-
TROL_PLUS
PA40_X_CONTROL_PLUS LAC180X LAX135T
AR180M_X_CONTROL PA55_X_CONTROL LAC240T LAX135X
AR180M_X_CON-
TROL_PLUS
PA55_X_CONTROL_PLUS LAC240X LAX180T
AR180N_X_CONTROL PA70_X_CONTROL LAC280T LAX180X
AR180N_X_CON-
TROL_PLUS
PA70_X_CONTROL_PLUS LAC280X LAX240T
AR240M_X_CONTROL PA80_X_CONTROL LAC332T LAX240X
AR240M_X_CON-
TROL_PLUS
PA80_X_CONTROL_PLUS LAC332X LAX280T
AR240N_X_CONTROL PAN020T LAC520T LAX280X
AR240N_X_CON-
TROL_PLUS
PAN020X LAC520X LAX332T
AR280M_X_CONTROL PAN025T LAE080T LAX332X
AR280M_X_CON-
TROL_PLUS
PAN025X LAE080X LAX520T
AR280N_X_CONTROL PAN030T LAE105T LAX520X
AR280N_X_CON-
TROL_PLUS
PAN030X LAE105X LAY080T
AR350_X_CONTROL PAN040T LAE135T LAY080X
AR350_X_CONTROL_PLUS PAN040X LAE135X LAY105T
AR520_X_CONTROL PAN055T LAE180T LAY105X
AR520_X_CONTROL_PLUS PAN055X LAE180X LAY135T
Table continues...
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11 Part No. D1599ENR16

AR80M_X_CONTROL PAN070T LAE240T LAY135X
AR80M_X_CONTROL_PLUS PAN070X LAE240X LAY180T
AR80N_X_CONTROL PAN080T LAE280T LAY180X
AR80N_X_CONTROL_PLUS PAN080X LAE280X LAY240T
LW12_X_CONTROL PAN120T LAH080T LAY240X
LW15_X_CONTROL RX105M_X_CONTROL LAH080X LAY280T
LW20_X_CONTROL RX105M_X_CON-
TROL_PLUS
LAH105T LAY280X
LW27_X_CONTROL RX105N_X_CONTROL LAH105X LAY332T
LW32_X_CONTROL RX105N_X_CON-
TROL_PLUS
LAH135T LAY332X
LW9_X_CONTROL RX135M_X_CONTROL LAH135X LAY520T
MWCX40M_X_CONTROL RX135M_X_CON-
TROL_PLUS
LAH180T LAY520X
MWCX40M_X_CON-
TROL_PLUS
RX135N_X_CONTROL LAH180X PAC080T
MWCX40N_X_CONTROL RX135N_X_CON-
TROL_PLUS
LAH240T PAC080X
MWCX40N_X_CON-
TROL_PLUS
RX180N_X_CONTROL LAH240X PAC105T
MWCX40_X_CON-
TROL_PLUS
RX240M_X_CONTROL LAH280T PAC105X
MWCX40_X_CONTROL RX240M_X_CON-
TROL_PLUS
LAH280X PAC135T
MWCX120_X_CONTROL RX240N_X_CONTROL LAH332T PAC135X
MWCX120_X_CON-
TROL_PLUS
RX240N_X_CON-
TROL_PLUS
LAH332X PAC180X
MWCX20_X_CONTROL RX280M_X_CONTROL LAH520T PAC240T
MWCX20_X_CON-
TROL_PLUS
RX280M_X_CON-
TROL_PLUS
LAH520X PAC240X
MWCX25_X_CONTROL RX280N_X_CONTROL LAU080T PAC280T
MWCX25_X_CON-
TROL_PLUS
RX280N_X_CON-
TROL_PLUS
LAU080X PAC280X
MWCX30_X_CONTROL RX350_X_CONTROL LAU105T PAC332T
MWCX30_X_CON-
TROL_PLUS
RX350_X_CONTROL_PLUS LAU105X PAC332X
MWCX55_X_CONTROL RX520_X_CONTROL LAU135T PAC520T
MWCX55_X_CON-
TROL_PLUS
RX520_X_CONTROL_PLUS LAU135X PAC520X
Table continues...
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. D1599ENR16

MWCX65_X_CONTROL RX80M_X_CONTROL LAU180T PAE080T
MWCX65_X_CON-
TROL_PLUS
RX80M_X_CONTROL_PLUS LAU180X PAE080X
MWCX80_X_CONTROL RX80N_X_CONTROL LAU240T PAE105T
MWCX80_X_CON-
TROL_PLUS
RX80N_X_CONTROL_PLUS LAU240X PAE105X
NX105_X_CONTROL PAX080T LAU280T PAE135T
PA120_X_CONTROL_PLUS PAX080X LAU280X PAE135X
SAH080D PAX105T LAU332T PAE180X
SAH105D PAX105X PAH080T PAE240T
SAH135D PAX135T PAH080X PAE240X
SAH240D PAX135X PAH105T PAE280T
SAY080D PAX180X PAH105X PAE280X
SAY105D PAX240T PAH135T SAU080D
RX180M_X_CONTROL PAX240X PAH135X SAU105D
RX180M_X_CON-
TROL_PLUS
PAX280T PAH180X SAC080D
RX180N_X_CON-
TROL_PLUS
PAX280X PAH240T SAC105D
PAC180T PAX332T PAH240X SAC135D
PAE180T PAX332X PAH280T SAC240D
PAH180T PAX520T PAH280X SAX080D
PAX180T PAX520X PAH332T SAX105D
SAE180D PAY080X PAH332X SAX135D
SAH180D PAY105T PAH520T SAX240D
SAX180D PAY105X PAH520X SAY240D
SAY135D PAY135T SAE080D PAY280X
PAY280T PAY135X SAE105D NX180_X_CONTROL
PAY240X PAY180X SAE135D NX180M_X_CONTROL
NX105M_X_CONTROL PAY240T SAE240D NX180M_X_CON-
TROL_PLUS
NX105M_X_CON-
TROL_PLUS
PAY332X PAY520X NX240_X_CONTROL
NX135_X_CONTROL NX135M_X_CONTROL NX135M_X_CON-
TROL_PLUS
NX240M_X_CONTROL
NX240M_X_CON-
TROL_PLUS
NX280_X_CONTROL NX280M_X_CONTROL NX280M_X_CON-
TROL_PLUS
Table continues...
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13 Part No. D1599ENR16

NX80_X_CONTROL NX80M_X_CONTROL PAY080T PAY332T
PAY520T RX105_BUPA_X_CONTROL RX105_BUPA_X_CON-
TROL_PLUS
RX135_BUPA_X_CONTROL
RX135_BUPA_X_CON-
TROL_PLUS
RX180M_X_CON-
TROL_PLUS
RX180N_X_CONTROL RX180N_X_CON-
TROL_PLUS
SA105 SA80 SAC280D SAC332D
SAC520D SAH280D SAH332D SAH520D
SAX280D SAX332D SAX520D SAY240D
SAY280D SAY332D SAY520D IAM080J
IAM080R SAM080D PAM080X PAM080T
IAM105J IAM105R SAM105D PAM105X
PAM105T IAM135J IAM135R SAM135D
PAM135X PAM135T IAM180J IAM180R
SAM180D PAM180X PAM180T IAM240J
IAM240R SAM240D PAM240X PAM240T
IAM280J IAM280R SAM280D PAM280X
PAM280T IAM332J IAM332R SAM332D
PAM332X PAM332T IAM520J IAM520R
SAM520D PAM520X PAM520T UAC080I
UAU080I UAX080I UAH080I UAR080I
UAM080I UAC105I UAU105I UAX105I
UAH105I UAR105I UAM105I UAC135I
UAU135I UAX135I UAH135I UAR135I
UAM135I UAC180I UAU180I UAX180I
UAH180I UAR180I UAM180I UAC240I
UAU240I UAX240I UAH240I UAR240I
UAM240I UAC280I UAU280I UAX280I
UAH280I UAR280I UAM280I UAC332I
UAU332I UAX332I UAH332I UAR332I
UAM332I UAC520I UAU520I UAX520I
UAH520I UAR520I UAM520I
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14 Part No. D1599ENR16

IA*080J¹ IA*080R¹ NA*080X¹ NA*080T¹
IA*105J¹ IA*105R¹ NA*105X¹ NA*105T¹
IA*135J¹ IA*135R¹ NA*135X¹ NA*135T¹
IA*180J¹ IA*180R¹ NA*180X¹ NA*180T¹
IA*240J¹ IA*240R¹ NA*240X¹ NA*240T¹
IA*280J¹ IA*280R¹ NA*280X¹ NA*280T¹
IA*332J¹ IA*332R¹ NA*332X¹ NA*332T¹
IA*520J¹ IA*520R¹ NA*520X¹ NA*520T¹
PA*080X¹ PA*080T¹ SA*080A¹ SA*080D¹
PA*105X¹ PA*105T¹ SA*105A¹ SA*105D¹
PA*135X¹ PA*135T¹ SA*135A¹ SA*135D¹
PA*180X¹ PA*180T¹ SA*180A¹ SA*180D¹
PA*240X¹ PA*240T¹ SA*240A¹ SA*240D¹
PA*280X¹ PA*280T¹ SA*280A¹ SA*280D¹
PA*332X¹ PA*332T¹ SA*332A¹ SA*332D¹
PA*520X¹ PA*520T¹ SA*520A¹ SA*520D¹
UA*080I¹ UA*105I¹ UA*135I¹ UA*180I¹
UA*240I¹ UA*280I¹ UA*332I¹ UA*520I¹
* can be character C - U - E - N - X - H - Y - K - M
1 - can followed by 11 digits or characters
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15 Part No. D1599ENR16

Serial Plate Location
CZW157N
1
2
1. Serial Plate Location; models starting May 16, 2019
2. Serial Plate Location; models through May 15, 2019
Figure 1
The serial plate is located on the rear panel of the machine and on
the frame inside the machine.
Always provide the machine serial number when ordering parts
or when seeking technical assistance.
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
16 Part No. D1599ENR16

Manufacturing Date
The manufacturing date for your unit can be found on the serial
number. The last two characters indicate first the year and then
the month. Refer to Table 1 and Table 2 . For example, a unit with
serial number 520I000001DK was manufactured in May 2015.
Manufacturing Date - Year
Year Serial Number Character
2009 P
2010 R
2011 T
2012 V
2013 X
2014 B
2015 D
2016 F
2017 H
2018 K
2019 M
2020 Q
2021 S
2022 U
2023 W
2024 Y
Table 1
Manufacturing Date - Month
Month Serial Number Character
January A or B
February C or D
March E or F
April G or H
May J or K
June L or M
July N or Q
August P or S
September R or U
October T or W
November V or Y
December X or Z
Table 2
Delivery Inspection
Upon delivery, visually inspect crate, protective cover, and unit
for any visible shipping damage. If signs of possible damage are
evident, have the carrier note the condition on the shipping pa-
pers before the shipping receipt is signed, or advise the carrier of
the condition as soon as it is discovered.
Introduction
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. D1599ENR16

Specifications and Dimensions
General Specifications
Specifi-
cations
7.5 kg /
20 lb. /
75 L
Models
10.5
kg /
25 lb. /
105 L
Models
13.5
kg /
30 lb. /
135 L
Models
18 kg /
40 lb. /
180 L
Models
24 kg /
55 lb. /
240 L
Models
28 kg /
70 lb. /
280 L
Models
35 kg /
80 lb. /
332 L
Models
52 kg /
120 lb. /
520 L
Models
Drum Capacity
Drum Ca-
pacity, lb
[kg]
20 [7.5] 25 [10.5] 30 [13.5] 40 [18] 55 [24] 70 [28] 80 [35] 120 [52]
Overall Dimensions
Overall
width, in.
[mm]
25.98 [660] 29.53 [750] 29.53 [750] 35.03 [890] 35.03 [890] 35.03 [890] 41.73
[1060]
41.73
[1060]
Overall
height, in.
[mm]
43.89
[1115]
48.22
[1225]
48.22
[1225]
55.51
[1410]
55.51
[1410]
55.51
[1410]
59.05
[1500]
59.05
[1500]
Overall
depth, in.
[mm]
30.91 [785] 30.91 [785] 35.43 [900] 36.02 [915] 41.73
[1060]
44.68
[1135]
40.55
[1030]
51.77
[1315]
Weight and Shipping Information
Net weight,
lbs. [kg]
(100G)
298 [135] 375 [170] 419 [190] 563 [255] 606 [275] 639 [290] 904 [410] 1146 [520]
Net weight,
lbs. [kg]
(150G)
N/A N/A N/A N/A N/A N/A 904 [410] N/A
Net weight,
lbs. [kg]
(200G)
298 [135] 375 [170] 419 [190] 695 [315] 728 [330] 783 [355] N/A N/A
Shipping
weight, lbs.
[kg]
(100G)
320 [145] 408 [185] 441 [200] 595 [270] 639 [290] 672 [305] 992 [450] 1257 [570]
Table continues...
Specifications and Dimensions
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
18 Part No. D1599ENR16

Specifi-
cations
7.5 kg /
20 lb. /
75 L
Models
10.5
kg /
25 lb. /
105 L
Models
13.5
kg /
30 lb. /
135 L
Models
18 kg /
40 lb. /
180 L
Models
24 kg /
55 lb. /
240 L
Models
28 kg /
70 lb. /
280 L
Models
35 kg /
80 lb. /
332 L
Models
52 kg /
120 lb. /
520 L
Models
Shipping
weight, lbs.
[kg]
(150G)
N/A N/A N/A N/A N/A N/A 1147 [520] N/A
Shipping
weight, lbs.
[kg]
(200G)
320 [145] 408 [185] 441 [200] 739 [335] 783 [355] 849 [385] N/A N/A
Shipping
dimensions
(WxDxH),
in. [mm]
27.95 x
32.87 x
49.02 [710
x 835 x
1245]
31.50 x
32.87 x
53.35 [800
x 835 x
1355]
31.50 x
37.40 x
53.35 [800
x 950 x
1355]
36.42 x
38.19 x
61.02 [925
x 970 x
1550]
36.42 x
44.49 x
61.02 [925
x 1130 x
1550]
36.42 x
46.85 x
61.02 [925
x 1190 x
1550]
43.31 x
43.31 x
66.93
[1100 x
1100 x
1700]
43.31 x
54.53 x
66.93
[1100 x
1385 x
1700]
Wash Cylinder Information
Cylinder
diameter
in. [mm]
20.87 [530] 24.40 [620] 24.40 [620] 29.53 [750] 29.53 [750] 29.53 [750] 35.98 [914] 35.98 [914]
Cylinder
depth in.
[mm]
13.78 [350] 13.78 [350] 17.72 [450] 16.14 [410] 21.46 [545] 24.41 [620] 19.88 [505] 31.10 [790]
Cylinder
volume ft 3
[l]
2.65 [75] 3.71 [105] 4.77 [135] 6.36 [180] 8.48 [240] 9.9 [280] 11.72 [332] 18.36 [520]
Door Opening Information
Door open-
ing size, in.
[mm]
13 [330] 16.14 [410] 16.14 [410] 18.11 [460] 18.11 [460] 18.11 [460] 19.84 [504] 19.84 [504]
Height of
door bot-
tom above
floor, in.
[mm]
13.74 [349] 13.46 [342] 13.46 [342] 18.31 [465] 18.31 [465] 18.31 [465] 18.31 [465] 18.31 [465]
Drive Train Information
Number of
motors in
drive train
11111111
Table continues...
Specifications and Dimensions
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
19 Part No. D1599ENR16

Specifi-
cations
7.5 kg /
20 lb. /
75 L
Models
10.5
kg /
25 lb. /
105 L
Models
13.5
kg /
30 lb. /
135 L
Models
18 kg /
40 lb. /
180 L
Models
24 kg /
55 lb. /
240 L
Models
28 kg /
70 lb. /
280 L
Models
35 kg /
80 lb. /
332 L
Models
52 kg /
120 lb. /
520 L
Models
Motor Size,
hp [kW]
(100G)
0.74 [0.55] 0.74 [0.55] 1 [0.75] 1 [0.75] 1.48 [1.1] 1.5 [2.01] N/A 5.36 [4]
Motor Size,
hp [kW]
(150G)
N/A N/A N/A N/A N/A N/A 2.95 [2.2] N/A
Motor Size,
hp [kW]
(200G)
0.74 [0.55] 0.74 [0.55] 1 [0.75] 1.48 [1.1] 2.01 [1.5] 2.01 [1.5] N/A N/A
Cylinder Speeds
Wash,
RPM
50 46 46 42 42 42 38 38
Extraction,
RPM
(100G)
580 540 540 490 490 490 440 440
Extraction,
RPM
(150G)
N/A N/A N/A N/A N/A N/A 540 N/A
Extraction,
RPM
(200G)
820 760 760 690 690 690 N/A N/A
Heating
Electric,
kW
6 / 9 (4.6) 6 / 9 / 12 9 / 12 12 / 18 18 21.9 27 40.6
Minimum
and Maxi-
mum
Steam
pressure,
PSI [bar]
[kPa]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
15-116
[1-8]
[100-800]
Minimum
and Maxi-
mum Water
pressure,
PSI [bar]
[kPa]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
15-87 [1-6]
[100-600]
Table continues...
Specifications and Dimensions
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
20 Part No. D1599ENR16