Alpha ESS Storion OF5 User manual

Storion OF5
ＥＮ － Ｖ １．０
User Manual

Copyright Statement
This manual is under the copy right of Alpha ESS Co., Ltd., with all rights reserved.
Please keep the manual properly and operate in strict accordance with all safety and
operating instructions in this manual. Please do not operate the system without reading
through the manual.
Content
1. General Introduction
1.1 Functions
2. Safety Precautions
3. System Introduction
3.1 System components
4. Operation- Switch On/Off
4.1 Switch on
4.2 Switch off
5. EMS Configuration
5.1 Running Page
5.2 History & Basic Info
5.3 System Setup
6. Emergency Situations
7. Online Monitoring
8. Warranty
01
01
01
01
01
02
02
02
03
03
04
04
04
05
05

1. General Introduction
1.1. Functions
3. System Introduction
3.1 System components
Please read through this manual carefully before operation
★In unlikely event of smoke or fire, turn off main switch immediately and contact your
installer for further instructions.
★System should be installed indoor and kept away from water, high temperature,
mechanical force and flames.
★Do not disassemble, move or modify any parts of the system without authorization
and instruction from AlphaESS.
★Lock the cabinet when it’s operating and keep the keys out of reach of children.
★Do not install the system in any environment of temperature below -10°C or over
50°C, and humidity over 80%.
★Do not touch the system with wet hands.
★Do not put any heavy objects on the top of the cabinet.
- 01 -
Pic 1. Storage OF5 connection diagram
Item
1
2
3
4
Components
Inverter (behind the front cover)
super cable box
Battery (1 to 4 M4860/M48100/M48112-P)
EMS screen
Storion OF5 is an energy storage system
specifically developed for off-grid applications by
AlphaESS . Storion OF5 is designed to be applied
in DC coupling system with connection port
available for generator as backup power source.
2. Safety Precautions
Warning - Electrical hazards

4.2 Switch off
4. Operation- Switch On/Off
4.1 Switch on
Please read through this manual carefully before operation
★In unlikely event of smoke or fire, turn off main switch immediately and contact your
installer for further instructions.
★System should be installed indoor and kept away from water, high temperature,
mechanical force and flames.
★Do not disassemble, move or modify any parts of the system without authorization
and instruction from AlphaESS.
★Lock the cabinet when it’s operating and keep the keys out of reach of children.
★Do not install the system in any environment of temperature below -10°C or over
50°C, and humidity over 80%.
★Do not touch the system with wet hands.
★Do not put any heavy objects on the top of the cabinet.
- 02 -
Pic 2. Storion OF5 Delivery Scope
Pic 3. Start Sequence (PV, Grid, AC OUT)
Pic 5. Start the battery
Step 1 Turn on the PV switch on the cable box.
Step 2 If generator is applied, connect it to Grid
ports and turn on the GRID switch; if not, then
keep the GRID switch off.
Step 3 Turn on the AC switch.
Step 1 Press button 1 on all the batteries, till the lights
off.
Step 2 Turn off the Battery switch.
Step 3 Turn off the AC switch.
Step 4 If generator is applied, turn off the GRID switch.
Step 5 Turn off the PV switch on the super cable box.
Step 4 Turn on the Battery switch.
Step 5 Press button 1 on all the batteries, and
the indicator light 2 will be on.
Note: The Grid switch is only used when a generator is applied.
1
2
3
4
System shall be turned on in the correct sequence to avoid any damage.
Pic 4. Turn on battery switch
(cable box or super cable box)
1
2

5.2 History & Basic Info
5. EMS Configuration
5.1 Running Page
The system may shut down itself to protect the batteries from over discharging in
responding to the large loads. To restart the system, the sequence should be:
More information can be found in M4860/M48100/M48112-P user manual.
- 03 -
Pic 6. Restart the system
Pic 7. Running Page
Step 1 Turn off all the battery modules and restart them;
Step 2 Open the front door and remove the front panel;
Caution, do not touch any metal parts of the inverter
to avoid potential electrical shock.
Step 3 Press the button “ON” on the inverter shortly to
light on the screen and then press it again for over 5 sec
until the picture as shown on left appears on the screen.
Step 4 Screw the front panel back on and lock the front
door.
The information in running page includes:
1: From top to bottom: PV size, battery capacity, inverter
size, self-consumption rate and self-sufficient rate.
2: System Status (Normal/Warning/Fault)
3: Internet Status (Online/Offline)
4: Running Diagram
Pic 8. History Pic 9. Basic Info
“History “page shows the PV, loads and
SOC data within last 24 hours. Can also
choose a certain date or time period to
check the history data.
“Basic Info” shows the current version of each
component and also reminds you if new
software is available.
1
1 2
2
3 4

- 04 -
Pic 10. System setup-Info Pic 11. Info-Basic Configuration
In this interface, you can set the following parameters: country, language, time / date, mailbox, zip
code, phone number and IP address.
Notice: End users can only access to the Info section. Only AlphaESS authorized installers
can set the System configuration so as to avoid any damages caused by wrong configuration
set by end users.
Storion OF5 comprises multiple batteries that are designed to prevent hazards resulting from failures.
However, AlphaESS cannot guarantee their absolute safety.
Fire
In case of fires, make sure that the following equipment is available near the system.
★SCBA (self-contained breathing apparatus) and protective gear in compliance with the Directive on
Personal Protective Equipment 89/686/EEC.
★Novec 1230, FM-200, or dioxide extinguisher.
Note: ABC extinguishers are not effective when the battery pack is on fire.
Batteries may explode when heated above 150°C. If possible, move the battery pack to a safe area
before it catches fire.
Leaking Batteries
If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one is exposed to
the leaked substance, immediately perform the actions described below.
★Inhalation: Evacuate the contaminated area, and seek medical attention.
★Contact with eyes: Rinse eyes with running water for 5 minutes, and seek medical attention.
★Contact with skin: Wash the affected area thoroughly with soap and water, and seek medical
attention.
★ Ingestion: Induce vomiting, and seek medical attention.
5.3 System Setup
6. Emergency Situations

- 05 -
Wet Batteries
If the battery pack is wet or submerged in water, do not let people access it, and then contact
AlphaESS or an authorized dealer for technical support.
Damaged Battery
Damaged batteries are dangerous and must be handled with the utmost care.
They are not fit for use and may pose a danger to people or property.
If the battery pack seems to be damaged, pack it in its original container, and then return it to
AlphaESS or an authorized dealer.
Note: Damaged batteries may leak electrolyte or produce flammable gas. If such a damage
occurs, immediately contact AlphaESS.
Products that are operated strictly in accordance with the user manual and the AlphaESS Installation
Manual are covered by the warranty. Any violation of this manual may void the warranty.
8.2 Limitation of Liability
Any product damage or property loss caused by the following conditions AlphaESS does not assume
any direct or indirect liability.
• Product modified, design changed or parts replaced without AlphaESS authorization;
• Changes, or attempted repairs and erasing of series number or seals by non AlphaESS technician;
• System design and installation are not in compliance with standards and regulations;
• Failure to comply with the local safety regulations (VDE for DE, SAA for AU);
• The Product has been improperly stored in dearler’s or end user’s premises;
• Transport damage (including painting scratch caused by movement inside packaging during
shipping). A claim should be made directly to shipping or insurance company as soon as the
container/packaging is unloaded and such damage is identified;
•Failure to follow any/all of the user manual, the installation guide and the maintenance regulations;
•Improper use or misuse of the device;
•Insufficient ventilation of the device;
• The maintenance procedures relating to the product have not been followed to an acceptable
standard;
• Force majeure (violent or stormy weather, lightning, overvoltage, fire etc.).
• Damages caused by any external factors.
7. Online Monitoring
8. Warranty
8.1 Warranty
Before you have access to the online monitoring data, you must obtain an account from your installer.
More detailed information can be obtained in Online Monitoring Webserver User Manual.

Alpha ESS Europe GmbH
+49 (0)6103 / 459 160-1
[email protected]
www.alpha-ess.de
Paul-Ehrlich-Straße 1a, 63225
Langen, Hessen
Alpha ESS Australia Pty. Ltd.
[phone] (Sales)
1300 968 933 (Technical Support)
[email protected]
www.alpha-ess.com.au
Suite 2, Level 1, 530 Botany Road,
Alexandria, NSW, 2015
Alpha ESS Co., Ltd.
[phone]
[email protected]
www.alpha-ess.com
JiuHua Road 888, Nantong High-Tech
Industrial Development Zone,
Nantong City, 226300
Alpha ESS Co., Ltd.
Official Website WeChat