Alpha Professional Tools WBC5KIT User manual

Part No: WBC5KIT/WBC6KIT
Version 3
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: [phone]
www.alpha-tools.com
Alpha® Wet Blade
Cutting Kit
Instruction Manual
MANUAL
Blade Guard
Loc-Line Assembly
Garden Hose Connection
GFCI
Hook & Loop Strap
*Tool and Blade sold separately
Water Hose

2
TABLE OF CONTENTS
SERVICE
Use only Alpha Professional Tools®accessories and spare parts. Should
components which have been described need to be exchanged, please contact
your dealer orAlpha Professional Tools®.
NEED MORE INFORMATION
For information onAlpha Professional Tools®complete product line, visit us on the
web at www.alpha-tools.com.
CAUTION!
• AttachtheWetBlade Cutting Kit correctly by following the procedure in this
instructional manual.
• Duringoperation,besuretowearpersonalsafetyequipment.
WBC5KIT/WBC6KIT Schematics.........................................................3
WBC5KIT Parts List..............................................................................3
WBC6KIT Parts List..............................................................................4
Instructions ...........................................................................................4
Creating Thread Holes for the Protective Guard ..................................5
Assembly of WBC5KIT/WBC6KIT Guard.............................................5
Installation of WBC5KIT/WBC6KIT Guard ...........................................6
Attaching Water Hose Assembly To Loc-Line.......................................7
Hook & Loop Strap Installation.............................................................8
Installation of EasyOn-EasyOff Sleeve.................................................8
Installation of GFCI...............................................................................9
Testing In-Line GFCI Unit ..................................................................9
Installation of Quick Connect Adapter ................................................10
Completed Assembly..........................................................................10
Compatibility Chart for WBC5KIT/WBC6KIT...................................... 11

3
WBC5KIT/WBC6KIT SCHEMATICS
WBC5KIT PARTS LIST
ITEM NO. PART NO. DESCRIPTION QUANTITY
1 140007 5” Safety Guard 1
2 140004 Loc-LineAssembly 1
3PDH-CABLETIES Plastic Tie 2
4 133778 Stainless Steel Collar 1
5 133779 Plastic Collar 1
6 133780 Adapter (1/4 NPT>>>M10*P1.0) 1
7 210129 WaterHoseAssembly(15ft./4.5m) 1
8 210124 MemoryWrap(3ft./1m) 1
9658-113 Quick ConnectAdapter 1
10 GFCI-1 GFCI Plug (120V) 1
11 140003 Hook&LoopStrap 1

4
INSTRUCTIONS
AlphaProfessionalTools®providesthehighestqualitypartsandmanufacturingtechniques
inthemanufactureofthisproduct.Inordertoobtainthemaximumeffectivenessandprovide
thehighestdegreeofsafety,itisnecessarytoreviewandfollowtheseinstructionscarefully
before using the tool.
WBC6KIT PARTS LIST
ITEM NO. PART NO. DESCRIPTION QUANTITY
1 133784 6” Safety Guard 1
2 133785 Loc-LineAssembly 1
3PDH-CABLETIES Plastic Tie 2
4 133778 Stainless Steel Collar 1
5 133779 Plastic Collar 1
6 133780 Adapter (1/4 NPT>>>M10*P1.0) 1
7 210129 WaterHoseAssembly(15ft./4.5m) 1
8 210124 MemoryWrap(3ft./1m) 1
9 133773 Quick ConnectAdapter 1
10 GFCI-1 GFCI Plug (120V) 1
11 140003 Hook&LoopStrap 1

5
ASSEMBLY OF WBC5KIT/WBC6KIT GUARD
1. Thread Plastic Tie through the
drilled holes in the Safety Guard.
(If using another grinders safety
guard, the guard must be altered to
accommodate the Plastic Ties as
shown above).
STEP 2
STEP 3 STEP 4
2. Place Loc-LineAssembly between
the holes on the Safety Guard and
tighten in place with the Plastic
Ties.
3. RepeatSteps1and2tocompletely
securetheLoc-LineAssemblytothe
Safety Guard.
4. Trim the Plastic Ties with pliers as
shown above.
Completed
GuardAssembly
STEP 1
25mm (1”)
CREATING THREAD HOLES FOR THE PROTECTIVE GUARD
HoleSize:
5mmor#8DrillBit
10mm (3/8”)
Illustration of
Protection Guard

6
INSTALLATION OF WBC5KIT/WBC6KIT GUARD
1. Select the collar that is compatible for the make and model of the grinder (Refer to
the Compatibility Chart)
2. Place the collar on the neck of the grinder.
3. Position the Safety Guard over the collar with the shield facing backwards. Push
DownuntiltheSafetyGuardisrmlyseatedonthebaseofgrindersneck.
4. SecuretheSafetyGuardtothegrinderbytighteningtheHexScrewusinga3/16
HexWrench.
Plastic collar Stainless Steel collar

7
ATTACHING WATER HOSE ASSEMBLY TO LOC-LINE
1. BendtheLoc-LineAssemblytoconformtotheWaterHoseAssembly.
2. Attach and tighten theAdapter on the end of the Loc-Line.
3. AttachandtightentheWaterHoseAssemblyontotheAdapter.

8
HOOK & LOOP STRAP INSTALLATION
1. PlacethegrinderontopoftheHook&Loop
Strap.
2. PositiontheHook&LoopStraparoundthe
WaterHoseAssemblyandthegrinderbody.
NOTE: Position the strap away from the
vent ports of the grinder.
INSTALLATION OF EASYON-EASYOFF SLEEVE
1. WraptheEasyOn-EasyOffSleevearoundtheWaterHoseAssemblyandelectrical
cord.
2. Finish the wrapping procedure until the entire EasyOn-EasyOff sleeve is secured.

9
INSTALLATION OF GFCI
1. Install the GFCI to the grinders power cord as shown. Connect to power and check
the GFCI for proper function.
TESTING IN-LINE GFCI UNIT
1. Connect GFCI to a single phaseAC power supply
2. Verify that the indicator lens shows red (indicating output voltage)
3. Press the test button to verify that the red in the indicator lens disappears
4. Press the reset button to verify the red indicator is visible
5. The GFCI is now ready to use
Indicator view lens
REDlensindicatespower
CLEAR lens indicates no power
RESETBUTTON
TESTBUTTON

10
INSTALLATION OF QUICK CONNECT ADAPTER
1. SecuretheQuickConnectAdaptertotheWaterHoseAssembly.
COMPLETED ASSEMBLY
HELPFUL HINT
The spray nozzle can be easily adjusted to direct the proper amount of
water distribution onto the blade based on the operator’s cutting application.

11
BRAND SIZE MODEL
MAKITA®
4-1/2”
GA4530 ser.
GA4534
4557 ser.
4564 ser.
5”
GA5010Z
GA5020 (Y)
9558PB
9565 ser.
6”
GA6010Z
GA6020
9566 ser.
METABO®
4-1/2” W8-115ser.
5”
W8-125Quick
W11-125Quick
WA11-125Quick
WE9-125Quick
WE14-125ser.
WP8-125QuickProtect
WP11-125QuickProtect
WEPA14-125QuickProtect
6”
W11-150Quick
WE14-150Quick
WER14150QuickProtect
WEPA14-150QuickProtect
WP11-150QuickProtect
BOSCH
4-1/2”
1800
1810 ser.
AG40 ser.
5”
1801
1803EVS
1811PS
1821 ser.
AG50 ser.
6”
1806E
1812PSD
AG60 ser.
DEWALT®
4-1/2”
D28110
D28112
D28402
4-1/2” / 5”
D28065
D28114(N)
D28115(N)
D28131
6”
D28140
D28144(N)
D28065(N)
D28066N
MILWAUKEE®
4/1/2”
6130-33
6140-30
6146-30
6146-31
6146-33
6147-30
6147-31
6121-30
6121-31
5”
6117-30
6117-31
6117-33
6117-33D
6121-31A
6”
6124-30
6124-31
6161-30
6161-31
6161-33
®
®
®®
COMPATIBILITY CHART

Copyright © 2018 Alpha Professional Tools. All rights reserved.
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: [phone]
www.alpha-tools.com