Alphatech IP BOLD 65 User manual

How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX
How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX Page 1 of 3
Jun 10, 2020 18:40
How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX
Setup user on Wildix PBX
Setup IP BOLD
SIP parameters
Phonebook
For network settings and mounting guide, refer to:
http://www.alphatechtechnologies.cz/soubory_edit/Ke_stazeni_auto/EN/Manuals/IP-BOLD65-quick-setup-v1.2.pdf
Setup user on Wildix PBX
Go to WMS -> Users and create a new user:
Click on to set SIP/VoIP password:Set Password
This guide explains how to connect an Alphatech doorphone to a Wildix PBX and set up a video preview.
Created: February 2018
Permalink: https://confluence.wildix.com/x/3gFKAw

How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX
How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX Page 2 of 3
Setup IP BOLD
SIP parameters
Access the web interface of the doorphone -> -> Current status SIP parameters:
Fill in the following fields:
SIP : SIPmode server
Account: 199 (internal number configured on PBX)
Auth.Id.: 199 (as internal number)
Password: SIP/VOIP password set in user config of PBX, i.e. d#hg7gX7Y1
Registration : IP address ofserver PBX SIP server : IP address of PBX
SIP : UDPTransport (usually)
Phonebook
Go to ->Network settings Phonebook
: configure a single or sequence of numbers to distribuite call to several numbers1...5 call number

How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX
How to configure AlphaTech IP BOLD 65 Intercom on Wildix PBX Page 3 of 3
Note: On Vision/ SuperVision/ WP600A and iOS or Android device, video starts automatically!