Alphatech IPDPS-01C User manual

ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88, Praha 4, Czech Republic
www.alphatechtechnologies.cz
Door Phone VoIP
IPDPS –01C
IPDPS –02C
IPDPS –01
IPDPS –02
User manual

Welcome
We congratulate you on purchase of “DoorPhoneSlim VoIP” (VoIP = Voice
over IP), which is the improved version of successful “New DoorPhone”
(NUDV). This DoorPhone VoIP will widely manage to satisfy your needs of
communication with persons at the building front door or your company entry,
or family house doorway. The universality lies in possibility to connect this
guard to an Ethernet network or VoIP exchange or directly to SIP server
through internet conection.
The basic DoorPhone VoIP module IPDPS-01 is supplied with 1 button,
IPDPS-02 is supplied with 2 buttons The next version of basic VoIP modules
(IPDPS-01C and IPDPS-02C) is with integrated colour camera.
The Doorphone is supplied from AC/DC powersupply 12V. The basic features
include the possibility to open up to two doors by means of connected electrical
locks (the buttons can be used for door code opening) and easier programming
by WEB sites from PC by network connection.

IPDP - installation and operating instructions
3
Table of Contents
DOORPHONE VOIP................................................................................................... 1
1BASIC DESCRIPTION....................................................................................... 4
1.1 FEATURES...................................................................................................... 4
1.2 MODULE ASSEMBLY...................................................................................... 5
1.3 MODULE FEATURES....................................................................................... 5
1.3.1 IPDPS Basic Module ............................................................................... 5
1.3.2 Connect to Network –Ethernet................................................................. 8
1.4 INSTALLATION OF DOORPHONE VOIP ASSEMBLY ......................................... 9
1.4.1 Open and close the cover of IPDPS......................................................... 9
1.4.2 Dismounting lighting of nameplate........................................................... 9
1.4.3 Assembly IPDPS on the wall................................................................... 10
1.4.4 Return lighting name plate after mounting on the wall. ......................... 10
1.4.5 Change of nameplates............................................................................. 11
1.5 FOCUS CAMERA AND DESCRIPTION OF FRONT PANEL ................................... 12
2DOORPHONE VOIP OPERATION ............................................................... 13
2.1 SIGNALING OVERVIEW................................................................................. 13
2.2 VISITOR AT DOOR ........................................................................................ 13
2.3 PERSON INSIDE OBJECT ............................................................................... 14
2.3.1 Outgoing Call ......................................................................................... 14
2.3.2 Incoming Call ......................................................................................... 14
3PROGRAMMING OF PARAMETERS.......................................................... 15
3.1 BASIC VOIP SETTINGS ................................................................................. 15
3.1.1 Choosing a mode and login .................................................................... 15
3.1.2 Language option ..................................................................................... 16
3.1.3 Network settings...................................................................................... 16
3.1.4 Peer to peer or SIP server connection.................................................... 18
3.1.5 Audio codec setting................................................................................. 18
3.1.6 Setting video............................................................................................ 19
3.1.7 Service settings ....................................................................................... 20
3.2 SETTING DOORPHONE PARAMETERS............................................................ 21
3.2.1 Basic Parameters.................................................................................... 21
3.2.2 All about relays....................................................................................... 22
3.2.3 Time Parameters..................................................................................... 24
3.2.4 Direct Dialing –Memories..................................................................... 25
4TECHNICAL PARAMETERS......................................................................... 26
4.1 ELECTRICAL PARAMETERS .......................................................................... 26
4.2 MECHANICAL DIMENSIONS .......................................................................... 26

IPDP - installation and operating instructions
4
1 Basic Description
1.1 Features
Voice communication is supplied only from telephone line
Two 16digit numbers (IP adress) with each button
Day/night switching
Possibility of the call extension by * or # choice
Possible to connect two independent locks for door opening
Possible use of 5 switch modes (e.g. camera, lighting, gradual
opening)
Two codes for hanging up the guard from telephone
Two codes for door opening from telephone
Six code locks (password from buttons at the door)
Integrated heating of printed circuit
Permanent lighting through visiting cards
Included color camera
Ethernet –10/100Mb with standard 10BaseT a 100BaseTx
Web server for remote configuration –BOA
Software for Internet telephony (VoIP) –Linphone
Operating system –Linux 2.6
USB for connection camera –USB guest 1.1, software GSPCA
software for video transmission to the browsers in PC –W3CAM(J-
PEG, RTSP Streem)
SIP connection P2P or PBX network system
WEB –firmware upgradeable
WEB –interface for control and setup parameters

IPDP - installation and operating instructions
5
1.2 Module Assembly
The IPDPS are the basic modules with color camera IPDPS-01/02C or without
camera IPDPS-01/02.
IPDPS-01 IPDPS-02 IPDPS-01C IPDPS-02C
1.3 Module Features
1.3.1 IPDPS Basic Module
The IPDPS basic module assembling from modulus IP and
motherboard. Positioning setting elements and connectors is on picture 1.
For IPDPS is necessary used the AC voltage of min. 10Vst - max.
15Vst or DC voltage of min. 12Vss to max. 18Vss must be energized to “12V”
terminal. This source loading depends on number of modules, since it
simultaneously serves feeding of lighting through visiting cards –at max.
number of connected modules the demand will not exceed 300mA. This source
can be also used for feeding of lock(s), and then it is necessary to consider the
electrical lock demand. In practice the alternating feeder 12V/1A mostly meets
these demands.

IPDP - installation and operating instructions
6
Picture 1 Basic module - motherboard
The connection of relay contact terminals is shown on fig. 1. The “NO”
designation means an idle-disconnected contact, “COM”means a pin contact
(middle) and “NC”means an idle-connected contact. The contacts of both
switches are galvanically isolated each other and from other guard circuits. The
variants of connection are shown on picture. 2.

IPDP - installation and operating instructions
7
Picture 2 Examples of relays connections
Setting voice communication –
position trimmers are presetting from
manufacture and in majority case
agree with, therefore changes setting
altering only in necessary case. Basic
position of trimmers, sense of rotation
and meaning trimmers are illustration
on picture 3.
Picture 3 Setting of trimmers

IPDP - installation and operating instructions
8
DIP switch setting basic operation and default
setting. See on picture 4.
Picture 4 DIP switch settings
1.3.2 Connect to Network –Ethernet

IPDP - installation and operating instructions
9
1.4 Installation of DoorPhone VoIP Assembly
1.4.1 Open and close the cover of IPDPS
1.4.2 Dismounting lighting of nameplate

IPDP - installation and operating instructions
10
1.4.3 Assembly IPDPS on the wall
The installation is made by screwing to the wall by means of dowels.
1.4.4 Return lighting name plate after mounting on the wall.

IPDP - installation and operating instructions
11
1.4.5 Change of nameplates
Each button has its separate nameplate hold by means of plastic flag
(see figure). The paper nameplates can be printed from Excel form (to be
downloaded on www.alphatechtechnologies.cz).

IPDP - installation and operating instructions
12
1.5 Focus camera and description of front panel
If is need focus picture from camera, so everything is illustration on picture
basic module on Picture 5 .
Picture 5 camera in IPDPS
1. VoIP module
2. connect microphone
3. connect speaker
4. camera
5. turning with objective of camera is focus picture

IPDP - installation and operating instructions
13
2 DoorPhone VoIP Operation
2.1 Signaling Overview
The all-purpose guard signals an acoustic conditions they may occur during
operation. Another signaling can be done by means of red LED (placed under
microphone hole). You can listen the signaling samples in Nset setting
program.
Condition
Tones
Tone frequency
Line lifting up
–▄–■–▀–
425-850-1275
Line hanging up
–▀–■–▄
1275-850-425
Report after calling
–▄–■–▀–
425-850-1275
Notice about call end
–■–■–■–
1275
Parameter confirmation
––█––
Switch on (Reset)
–■–▄–■–
1275-850-1275
Error (anything, if unsuitable)
–■–■–■–■–■–■–
425….
Empty memory (no progr. numb.)
–█–▄–■–▄–■–▄–
850-1275-1700…
2.2 Visitor at Door
The all-purpose guard function is influenced partly by used guard assembly
(with keyboard or without it) and partly by setting of guard parameters.
The DoorPhone buttons are provided by nameplates or positions of persons
inside the object. The incoming person will press the corresponding button, the
DoorPhone will lift up the VoIP canale neither immediately (the button is not the
first number from code lock), or with delay and dial the programmed phone
number thru VoIP, but dial number differs by choice mode, which is set in the
DoorPhone :
- Day/night mode = being the DoorPhone in Day mode, so it is always
dialing a number set in table 1, in Night mode, it is always dialing a
number set in table 2.
- mode two number group = first press –it always dials a number set
in table 1. By repeated press of the same button or detection of busy
tone after dialing the DoorPhone will select the number from the
second group (table 2). The next press of the same button again
selects a number of the first group, etc..……
The switch (code lock) can be controlled by first 10 buttons of DoorPhone. If
the visitor at door presses buttons in such combination that meet the
preprogrammed code and the time among presses is not bigger than the set
point, then the DoorPhone will pick up and close the corresponding switch (if

IPDP - installation and operating instructions
14
set in m=1 or m=5 modes) to the period given by seting in parameters. Then it
will hang up.
2.3 Person Inside Object
The person inside object is considered a person that is in phone contact with
DoorPhone.
2.3.1 Outgoing Call
The outgoing call is the call from DoorPhone (caused by visitor). After guard
choice the telephone is ringing inside object and the pickuping up will allow
speaking to the visitor at door. The code choice can close the switch, if set to
m=1 or m=5 modes, change over the Day/Night modes and hang up the
DoorPhone. The DoorPhone in 10 seconds before call end will send a notice
about call end and the call may be extended by sign selection (* or #). The
telephone hanging up will end the call.
2.3.2 Incoming Call
The incoming call is the call to the DoorPhone (caused by person inside
object). After exchange number selection, where the DoorPhone is connected,
the DoorPhone is ringing and when set number of rings is over, the DoorPhone
will pick up and it is possible to speak. The possibilities are the same as with
outgoing call.

IPDP - installation and operating instructions
15
3 Programming of Parameters
3.1 Basic VoIP settings
3.1.1 Choosing a mode and login
It is important to choose a DoorPhone mode first. The
DoorPhone can work in the PeerToPeer mode or SIP
server mode. The mode setting can be made by a
relevant switch (DIP switch see on picture 8). In the SIP
server mode is possible to choose SIP server (external).
It can be set in a configuration interface of the
DoorPhone.
Picture 6 DIP switch setting
In your web browser enter IP address of the DoorPhone, default is
192.168.1.250. See Picture 7. Enter user name and password. User name is
„admin“, default password is „1234“. See Picture 7.
Picture 7 First site - video from camera
Picture 8 Login to setup

IPDP - installation and operating instructions
16
3.1.2 Language option
Language setting can be made in a menu on the left panel.
3.1.3 Network settings
Network settings are located in the Network seting menu item. It is possible to
use DHCP service (1) or you can enter IP addresses manually.
Manual configuration:
After making changes click on a save and restart button.
1 –Enable/disable ethernet settings via DHCP
2 –Default value –presetings to the firm settings. After making changes click
on a save and restart button (display screen - see page 20).

IPDP - installation and operating instructions
17
DHCP configuration:
After making changes click on a save and restart button.
1 –Enable/disable ethernet settings via DHCP
2 –show automatic DHCP generate IP adress and othet settings
3 –Default value –presetings to the firm settings. After making changes click
on a save and restart button (display screen - see page 20).
4 –Show mode of DoorPhone –Day/Night
5 –Return to the video from color camera screen
Important: if you use setup via DHCP, then it‘s assigning IP address to
DoorPhone automatically and network administrator must tell you actual
address, to was possibility display video in web browser. Because assigning IP
adress can change after e.g . failure power supply in object, so they
recommended enjoy DoorPhone with fixed IP address.

IPDP - installation and operating instructions
18
3.1.4 Peer to peer or SIP server connection
The DoorPhone can be set to the peer to peer (P2P) mode or to the SIP server
mode by DIP switch (page 15). In P2P mode DoorPhone calling IP adress –in
memory buttons (page 25).
If you setting SIP server mode by DIP switch, so add in menu item SIP
parameters
After making changes use the save changes button.
1 –SIP proxy server IP adress or the SIP server name and port (usually 5060
or 5061)
2 –Registering data to SIP proxy server
3 –Default value –presetings to the firm settings. After making changes use
the save changes button.
3.1.5 Audio codec setting
After making changes use the save changes button.
1 –There is choosing only priority using audio codecs, used codec is selection
automatically at make audio connection in SIP protocol.
2 –Default value –presetings to the firm settings. After making changes use
the save changes button.

IPDP - installation and operating instructions
19
3.1.6 Setting video
After making changes use the save changes button.
1 –Resolution display video
2 –Number picture per second (frequency restoring picture)
3 –Setting next parameters of camera
4 –Default value –presetings to the firm settings. After making changes use
the save changes button.

IPDP - installation and operating instructions
20
3.1.7 Service settings
1 –display current version of firmware in module VoIP and in module
doorphone, button switching if is has save history events in basic or
enhanced mode - it is important to analyses mistakes and problems. This
file it is possible save to PC by click on download log file.
2 –tool for upgrade firmware in module VoIP and in module doorphone,
switching automatic - information is in upload fille.
3 –Addition / change language file - upload fille with language assignment
4 –change access password, default is 1234
5 –reboot VoIP module.