Alphatech SlimDoorPhone - 01 User manual

SlimDoorPhone – 01
SlimDoorPhone – 02
SlimDoorPhone – 04
ver.20/2011
User´smanual
SlimDoorPhone

2
Contents
1BASIC DESCRIPTION...................................................................................3
1.1 FEATURES ..................................................................................................3
1.2 SLIMDOORPHONEMODELS .........................................................................4
2INSTALLATION.............................................................................................4
2.1 OPENING,WIRING,WALL MOUNTING ANDSETTINGS.....................................4
2.1.1 Namecardpanel....................................................................................4
2.1.2 Uncovercontrolelements.......................................................................5
2.1.3 Wiring andwall mounting......................................................................5
2.1.4 Switches................................................................................................6
2.1.5 Voicelevel.............................................................................................7
2.2 LOCATION OFDOORPHONECOMPONENTS ...................................................8
2.3 CHANGINGNAMECARDS.............................................................................9
2.4 FINALCLOSINGOF DOORPHONE..................................................................9
2.4.1 Coveringcontrolelements.....................................................................9
2.4.2 Replacingnamecardpanel....................................................................9
2.5 CONNECTTHE KEYBOARD ........................................................................10
3SLIMDOORPHONESERVICES..................................................................11
3.1 SIGNALLING OVERVIEW............................................................................11
3.2 VISITORATTHEDOOR...............................................................................11
3.2.1 SlimDoorPhonewithKeyboard............................................................12
3.3 TELEPHONE CALLER.................................................................................12
3.3.1 Outgoingcall.......................................................................................12
3.3.2 Incomingcall.......................................................................................12
4PARAMETERPROGRAMMING................................................................13
4.1 PROGRAMMINGFROMATELEPHONEBY DTMF..........................................13
4.1.1 Enteringprogrammingmode...............................................................13
4.1.2 Parameterprogramming......................................................................13
4.2 PROGRAMMINGFROMA PC –SLIMDPSETPROGRAM..................................14
5PARAMETERDESCRIPTION....................................................................15
5.1 DIRECT DIALLING –MEMORIES ................................................................15
5.2 RELAY .....................................................................................................15
5.3 BASICPARAMETERS..................................................................................17
5.4 TIMEPARAMETERS ...................................................................................18
5.5 PRESETTING AND DELETING......................................................................21
5.6 EXITPROGRAMMING.................................................................................22
5.7 SYSTEMSETTING ......................................................................................22
5.8 OVERVIEWOF PARAMETERS .....................................................................23
6TECHNICALPARAMETERS......................................................................25
6.1 ELECTRICALPARAMETERS ........................................................................25
6.2 MECHANICALDIMENSIONS........................................................................26
7TABLE FOREASYPROGRAMMING........................................................26
8DRILLINGMASTERBOARD.....................................................................28

3
1Basicdescription
1.1Features
ØVery slimmoduleforsurfacemounting only.Supplied in1,2or4
button variants.
ØPossibilityconnection keyboardwithsecond relay.
ØVoicecommunication powered fromanalogue telephone line only.
ØPulseand tone (DTMF)dial
ØTwo16digitsnumberssaved undereachbutton (includes*,#,
RECALL and pause)
ØDAY/NIGHT mode
ØCallprolongation bydialling *or#
ØElectrical(magnetic) lock compatible
ØCode tohang up fromphone
ØCode toopen the doorbyphone
Ø3different passwordsforcode lock(externalcode frombuttons)
ØMode 2impulseswithowncontrol
ØOptionalnumberof ringsbeforepicking up incoming call
ØOptionaltimebetween code entry button-presses
ØOptionaldelaytimebeforeredialling
ØOptionaltimebeforedialling starts
ØOptionalparametersforDTMFtones, Recalland Pauseduration
Ø3defaultlevels
ØProgramming byremotecontrol(DTMF)and bydirectPCconnection
via USBcable(availableseparately)
ØIntegrated heatingofprinted circuit(PCB)(option)
ØPermanentlighting through visiting cards(option)
ØEarthing outlet forbetterprotection against staticelectricity
ØSwitchableaudibleconfirmationtones
New model 2010 makesit possibletoconnection keyboard. Keyboard
isnext, mechanicalinthe samewaybigmodulus,includesbuttons0-9,
furtherkeyforhang-up andkey"key"forentry code.Keyboardconnectwith
SlimDoorPhone bycableconnecttoprogrammingconnector.Keyboard
includesnextrelayand ispossiblehe controlbyphone (DTMFdial),on
keyboardit ispossibleentertelephone numberand dialsophone numbersand
byforceof10 codesitispossibleactivaterelayinkeyboardand relayin
SlimDoorPhone.

4
1.2SlimDoorPhonemodels
Three versionsareavailablepluskeyboard:
SDP01-1buttonSDP02-2buttonsSDP04-4buttonsKeyboard
2Installation
Thiscompactunitisfixedby2screwstothe wall.
2.1Opening, wiring, wall mountingandsettings
2.1.1Namecardpanel
1. Everyunitissupplied witha
specialkeywhichisusedto
releasethe namecardsonthe
frontpanel.Pushthe keyinto
the holeinthe speakergrille
(see figure-1).
2. Pushthe namecardpanel
down and then pushit towards
togrille(see figure-2).
3. The panelwillbe released.
Pullittowardsyou toremove
(see figure–3).

5
2.1.2Uncovercontrol elements
4. Pushthe aluminiumspeakergrilledown(see
figure–4).
2.1.3Wiring andwall mounting
5. Usethe wall mounting
templateatthe end of the
manual tomark the
position forthe screw
holesand cable
connection on the
mounting surface. Drill the
holes.
6. Feed the cable(analogue
line,powersupply,lock –
see figure-6)through the
cablehole.
Fixthe panel tothe wall
using the screwsand
rawlplugssupplied.
Note: Somematerialssuchasmetal and wood mayrequirespecial
screw types.
Topowerthe unit forvoice,connectthe telephone wiresintothe terminal
(on the rightside).Using eitherastandardanaloguephone line oran
analogue extension on aPBX.
Forthe externalpowersupply,connecttothe terminal"12V"external
powersupplyACmin. 10V/ max.15VorDC min. 12V/ max.18V.
The energyconsumption ofaconnected electrical(magnetic) lock (0,5A–
1,0A) determinesthe load on the powersupply.Ifyou activatethe heating
featurethe PCBcurrentwillclimbtoabout150mA.Werecommend
powersupplyAC12V/1A.

6
The wiring ofrelaycontactsisexplained inthe nextpicture.The symbol
"NO"meanscontactnormallyopen, "COM"meanssharing output
(central)and "NC"meanscontactnormallyclosed.The relaycontactis
isolated fromthe othercircuitson the board.Forthe variantsoflock
connection see the picturebelow.
Wiring of standard and magnetic(inverse) lock
7. AspecialUSB cableenablesthe doorphone tobe connected toaPC
forprogramming ofindividualparameters.Adedicated Windows
programisincluded on the CD(requiresversion W98SEorhigher).
2.1.4Switches
8. The switchmarked HEAT (see figure–
8)activates heating ofthe PCB.Thisis
forincreased resistanceagainst
humidity.Tousethisfeatureyou must
connect an external 12Vpowersupply.
9. The switchmarked SERVICE (see
figure–9)isrequired forprogramming
the unitwhen the passwordisforgotten.
It isperformed byordinary phone
(DTMF–tone dial).
The switchis
Power
supply
lock
Telephone
line

7
ThePCB heating hastwomajorbenefits.Firstly,itwarmsthe board
during wintertime(temperaturesunder-20 C,mostcircuitshavewarranty
operation downto-20 C)and secondlyithelpstoprotectthe PCBagainst
humiditywhen installed outside.
2.1.5Voicelevel
10.Voice communication –the trimmerposition isfactoryand shouldbe
suitableformostinstallations.Changethe trimmerposition onlywhen
necessary.
The trimmer"MIC"isdesigned
formicrophone volumesetting.
The trimmer"SPK"isdesigned
forloudspeakervolumesetting.
The volumesettingsaremore
than adequateformostsituations.
Thereforewedo notrecommend
setting the trimmerposition more
than .The mostsuitableposition
is1/3fromminimumamplification.
The trimmer"TRH"isdesigned
forsetting the microphone
activation level.Itallowsbalancing
betweenthe microphone and
speakertoeliminatefeedback.
Thissetting isalsoinfluenced by
the noiseofthesurrounding environment.
SetupProcess: The trimmersMICand SPK aresetto ¼position from
minimumloudness level(turnfullyanti-clockwiseforminimum).The trimmer
TRH issettoacentral position.Tofine tune, makeatestcall.Speakquietly,
and byadjusting the trimmerTRHfromthe central position anticlockwise,
yourspeechshouldbe heardmoreclearlybythe PBXuser. The amplification
ofthe speakercan be adjusted according toyourrequirements.Voice
interruption mightoccurifyou setthe amplification toohigh.Inthiscaseyou
can usethe trimmerTRH tocorrectthe balancebetween the speakerand the
microphone.

8
2.2LocationofDoorphonecomponents
Allmounting,controland setting elementsarelocated underthespeakerfront
aluminiumgrille.
.
PCconnector
SlimDoorPhone
fixing screw
hole
Serviceswitch
Loudspeaker
MIC-setting
of
microphone
volume
TRH –
setting of
microphone
activation
level
SPK- setting of
speakervolume
Heating
activation
12V=/~for
relay,lightand
heating
Relay
Telephone
line
connection
Microphone
Buttons
Holeforlead incable

9
2.3Changingnamecards
Namecardpanel(2.1.1on page 4)hasspaces
toinsert printed namecards. Insert namecards
fromtop (see picture). Cardscan easilybe printed
withpicturesaswell astextusing the included
software. The cardoutline ismarked foreasycutting .
2.4Final closingofDoorphone
2.4.1Coveringcontrolelements
1. Pushaluminiumspeakercoverback up (see
picture).Takecarewhen re-covering the
speaker.Thealuminiumedge ofthe speaker
maybe gentlypressed if required.
2.4.2Replacing namecardpanel
2. Pushkeyintoholeinspeaker
grilleasfaraspossible.(see
figure-2).
3. Pushnamecardpanelupwards
and pushthe bottomedge in
(see figure-3).
4. Pushthenamecardpanelback
down behind the lipofthe
casing (see figure-4).
pocket
Panelwith
cards

10
2.5ConnecttheKeyboard
Keyboardwork asseparatecode lock,he hasconnection powersupply
12V, inputfordeparturebutton and one relaywithchange-overcontact. Incase
connection byspecialcablekeyboardwithSlimDoorPhone characteristics
thosecode lock expand and keyboardcan be usenotonlytocontrolrelayin
keyboard,butrelayindoorphone SlimDoorPhone contoltoo and useso10
codesforone and10codesforsecondrelay.Furtheritispossiblekeyboard
usetodialling numbers.Exitbutton can controloneorthe otherrelayand
relayinkeyboarditispossiblecontrolfromphone during conversation too
(parameter.30).Code lockforrelayinSlimDoorPhone frombuttonsstays
conserved.
Connection byspecialcableismakethatwaywillyou useprogramming
connectors8pin.Toprogramming fromPCisusingssameUSB cableUSB-
KAB and programSlimDPset isinnewversion 2010 equipped alsobyprogram
forsetting keyboard.
Tobasicfunction isnecessary haveconnected to SlimDoorPhone
telephoneline and tokeyboard12V.12Vforheating boardand powersupply
ofrelayinSlimDoorPhone can usefromsamesourceand itispossibleuse
alsoforpowersupplyoflocks. Recommended isuselowpowerlocks.
The choiceisentered bygradualpressing ofbuttonswithdigits. Firstlythe
keysymbolmustbe pressed toenterapassword. When pressing X,the guard
willhang up.
ATTENTION: atconnection keyboardwithdoorphone isn't need
applytoexchangesSiemens BestBox!!!

11
3SlimDoorPhoneServices
3.1SignallingOverview
The unit signalsacousticconditionsthatmayoccurduring operation. You
can listen tothe signalling samplesinthe SlimDPset program.
Condition Tones Tonefrequency
Pickupline –▄–■–▀– 425-850-1275
Hang upline –▀–■–▄1275-850-425
Confirmcommand ––█–– 425
Dialling DTMF/Pulse
Call
Conversationend warning –■–■–■– 1275
Enterprogramming(phoneorPC) –■–■–■– 850
Programmingtone ––▓–▓––––– mod. 850
Parameterconfirmation––█––
ProgrammingfromPC Silent
Connectiontoline(Reset) –■–▄–■– 1275-850-1275
Error –■–■–■–■–■–■– 425….
Emptymemory –█–▄–■–▄–■–▄– 850-1275-1700…
Openlock ▓▓▓▓▓▓▓ modul50/1250
3.2Visitoratthedoor
When avisitorpressesabutton the unitwill lift upthe line,either
immediately(providing the button isnotthe firstnumberfromcode lock),or
withdelay(parameter53) andafterperiod given by parameter55, will dialthe
programmed phone number.The dialled numberisdictated bythe chosen
mode,whichisset inthe unit(parameter47):
- Day/night mode =Ifthe unitisinDaymode,itwill alwaysdialthe
numberset in parameter1,InNight mode,itwillalwaysdialthe number
set in parameter2.The mode switchoverissetin parameters 45,46.
- Two-Groupmode =on the firstpressthe numbersetin parameter1
will be dialled.By pressing ofthe samebutton twice,oron detection of
busytone aftertrying the firstnumber,the unitwillselectthe number

12
fromthe second group(parameter2).The nextpressofthe same
button againselectsthe numberfromthe first group,etc..……
Ifthe button ispressed afterthe line hasbeenopened (butbeforethe
callisanswered),the unitwillhang up forthe period given by parameter54, lift
up the line and dial the othergroup number.
The relaycan be controlled bypressing the buttonsinthe combination
thatissetinthe preprogrammed code (parameters 32-34).The timebetween
pressesmustnotbe biggerthan thatsetin parameter53. The unitwilllift up
and closethe corresponding relayorthe period given by parameter36 . Then it
willhang up.
3.2.1SlimDoorPhonewithKeyboard
The keyboardhastwofunctionalbuttons–
key symbol =oncepressing the numerical
combination isconsidered asthe combination for
controlofthe switches.The secondbutton –X
symbol =when pressing the guardimmediatelywill
hang up.
The incoming person isdialing numberasto
be doneon phone –the period among button
pressesshouldbe lowerthanthe value given by
parameterin keyboard.Afterthisperiod the guardwill lift up and dialthe given
number.
3.3TelephoneCaller
ATelephone Callerisaperson thatisinphoneconnection with
SlimDoorPhone.
3.3.1Outgoing call
An“outgoing”callisacallfromthe unit(i.e.when avisitorpressesa
button).Oncethe visitorhaspressed abutton atelephone willring.On
answering thetelephone,you will be abletoconversewiththe visitor.10
secondsbeforethe maximumcallduration (parameter52)the unitwill emita
tone towarnthatthe call will end.The callmaybe extended bypressing the
keyassetin parameter42.Acode maybe dialled toclosethe relay
(parameter35),releasing the lock.Hanging up the telephone willend the call,
aswillthebusytone fromthe PBX.
3.3.2Incoming call
Anincoming call isacall tothe unit. Afterdialling the PBXextension numberto
whichthe unitisconnected,the unitwillring forthe setnumberofrings
(parameter51),the unitwillliftup and itispossibletospeak.The possibilities
arethe sameaswithoutgoing call(Chapter3.3.1).Itisalsopossibletoswitch
betweenDayand Night service.

13
•If,withinthe first10 seconds,the servicepasswordisentered,the unit
willswitchtoprogramming mode and voicecommunication willcease.
•During an incoming callitispossibletorestrictrelaycontrol (parameter
37). Thiscan be usefulinsomespecialapplications.
4Parameterprogramming
4.1ProgrammingfromatelephonebyDTMF
4.1.1Entering programming mode
The SlimDoorPhone maybe set toprogramming mode intwoways:
1. bypassword –dialthe unit‘snumber (eitherextension number,if
connected toaPBXortelephone number,ifconnected toaPSTNline).The
unitwillanswer(you willhearthe Pickupline tone –see Chapter3.1
page11).Within10 secondsdial #xxxx, wherexxxxisthe passwordfor
entry toprogramming and,ifOK,the registration tone forprogramming
mode willsound,and afterwardsthe Programming tone isheard(see
Chapter3.1page 11).
2. by "SERVICE" switch –dialthe unitinthe samewayasin1,but
whenthe SERVICEswitchisconnected,the unitwillautomatically
enterprogramming mode.You will hearthe call connection
confirmation tone,the confirmation tone forprogramming mode and
afterwardsthe Programming tone isheard.(see Chapter3.1page
11).
4.1.2Parameterprogramming
The initialstateforprogramming issignalled bythe programming
confirmationtone.The unitwillalwaysreverttothisstateafter5secondsof
inactivity, even if you havestarted toprogramaparameter.
When programming,therearetwotypesofparameters.The majorityare
parameterswitha fixedlength.The parameterisalwayssaved immediately
and isconfirmedbyParameterConfirmation tone.Parameters withvariable
length (parameters 1,2,32,33,34)aresaved afterthe inactivityperiod expires
(5sec).However,avaraiblelengthparameterwillbe saved immediatelywhen
maximumpermitted numberofdigitsisreached.Forparameters1and 2the
maximumnumberof digitsis16, and forparameters32,33,34 itis6.
If,during programming,you enteranumberwhichisnotallowable,then
the unitimmediatelyemitsan errortone.The parameterwillnotbe recorded
orchanged,and the unitwillreturntoitsinitialprogramming stateand itwillbe
possibletorepeatthe parametersetting orprogramanotherparameter.

14
The unitstaysinactiveinprogramming mode for34 secondsand will then
automaticallyhang up.EverytimeaDTMFtone isdialled,thisperiod isreset.
Alternatively, parameter9mayalsobe selected toend programming mode.
Toprogramaparameter,enterthe parameternumberfollowed bythe
value you wishtoset. The unitwilleitherrespond withthe Parameter
Confirmation Tone, orone ofthe ErrorTones.
Note1. if you wishtomaintainthe connection inprogramming mode (i.e.extend the 34
secondsperiod)thenitisnecessarytooccasionallypress akey(e.g. *, #or7). The unit
willrespondwithan errortone butthe connection willbe kept alive.
Note2. The #sign isnotused inthe valuesforparameters32,33 and 34,and can be
used toimmediatelysavetheparameter.
4.2ProgrammingfromaPC–SlimDPsetprogram
Tosetup the unit fromaPCyou willrequireaspecialUSB toolcable,available
separately,and mustfirstinstallthe USB driverand SlimDPsetsoftware.Refer
tothe CD formoredetails.The unitmustalsobe connected tothe telephone
line.
Procedure:
-Connect the Doorphone tothe line
-Connect the unit tothe PCwiththe USB tool cable.
-Run the SlimDPsetprogram.The unitwillenterPCprogramming mode
and emitthe Enter Programming tone (see chapter3.1).Ifconnection is
lost, itisnecessary todisconnectthe USB cablefromunitand connectit
again.The unitwillanswerand,providing the SlimDPsetprogramis
running,it willconfirmitsentry intoprogramming mode again.
Refertothe SlimDPsetmanual formoredetails.
USB –PC
connection
USB
–
tool
Smallconnector

15
5Parameterdescription
5.1DirectDialling–Memories
Parameter
Value Description Default
1 tnn… No. nn underbutton t-
t–Button number(memory) [1-4]
nn –telephone numberupto16 digitstobe stored.
Refertothe tableforotherchoices.
The numberstored inparameter1isthe numberforthe
firstgroup orthe numberfor Day mode.
Parameter
Value Description Default
2 tnn… No. nn underbutton t-
t–Button number(memory) [1-4]
nn –telephone numberupto16 digitstobe stored.
Refertothe tableforotherchoices.
The numberstored inparameter2isthe numberforthe
secondgroup orthe numberfor Night mode
Note: Theswitchoverto Day/Nightmode remainssetinthe
unit evenafterlinedisconnection.
5.2Relay
Parameter
Value Description Default
31 m Relaymode 1
m– relay mode [ 1or4]
m=1 relay mode –relaywill closeoncommand orpasswordfor ss period
(used forelectricallocks, gateopening,etc.)
m=4 button mode –(activated bybutton press e.g. externalbell).
parameter
dial
0-9 0-9
# #
* **
Recall * #
Pause *0
parameter
choice
0-9 0-9
# #
* **
Recall * #
Pause *0

16
Parameter
Value Description Default
32 hhhhhh Externalaccess codein
DAY+NIGHT
mode -
33 hhhhhh Externalaccess codein DAY mode -
34 hhhhhh Externalaccess codein NIGHT mode -
hhhhhh –passwordforrelayclosing frombuttons[2to6digits]
The 3passwordsarecontrolled byDay/Night;the combinationisentered using
the unitbuttons.Itisinfluenced bythe settingof Relay mode and Day/Night
switchover.When set to 2-groupmode the unitispermanentlyin DAY mode.
Followtheseruleswhen choosing passwordcombination:
§Selectpasswordscarefully,topreventtheirdiscoveryfromwearon
buttonscausedbyfrequent use.
§Selectthe firstpasswordbutton frominfrequently-used buttonsfor
directdialling (-extendschoicetime)(-notvalidforkeyboard).
Note: Theswitchoverto Day/Nightmode remainssetinunitevenafterline
disconnection.
Parameter
ValueDescription Default
35 aa Internalaccess code 55
aa –commandfromphone torelayclosing [2digits]
It isrecommended tosetthe samecommand forInternalAccessCodeand
End Call(parameter43)aa=bb.
ParametrValue Description Default
36 ss Relayclosingtime05
ss –duration of relayclosing [2digits01-99]
ParametrValue Description Default
37 pp Timebetween2impulses[sec] 05
pp –duration of delaybetween 2impulsesofrelay[2digits01-99]

17
Parameter
ValueDescription Default
38 cc Internalaccess code2impulses 66
cc –commandfromphone torelayclosing [2digits] –2impulses
Parameter
Value Description Default
39 hhhhhh
Externalaccess code
in
DAY+NIGHT modefor2impulses 66
hhhhhh –passwordforrelayclosing frombuttons[2to6digits] foractivation
2impulsesinDAY and NIGHT mode.
Parameter
ValueDescription Default
30 kk Internalaccess codeforrelayinkeyboard 77
kk –commandfromphone torelayinkeyboardclosing [2digits]
5.3Basicparameters
Parameter
Value Description Default
41 v Diallingtype 0
v –dial type
v=0 isDTMFtone dial, v=1 ispulsedial
Parameter
Value Description Default
42 z Prolong call *
z –button forcallprolongation *or#(10 secbeforeMaximumCall Duration
the unitwillemit atone. Pressing thisbutton willprolong the call)

18
Parameter
Value Description Default
43 bb End call 55
bb –commandforunithanging up fromphone [2digits]
It isrecommended tosetthesamecommand forbothInternalAccessCode
(parameter35)and End Call aa=bb.
Parameter
Value Description Default
44 xxxx Password 0000
xxxx –servicepasswordforentry toprogramming
Parameter
ValueDescription Default
45 dd DAYMODE switching 11
46 nn NIGHTMODE switching 10
dd –commandfor DAY MODE switching [2digits]
nn –commandfor NIGHT MODE switching [2digits]
Note: Theswitchoverto Day/Nightmode remainssetinunitevenafterline
disconnection.
Parameter
Value Description Default
47 e Diallingmode1
e –operating mode of unit
e=0 selects 2-Group mode, e=1 selects Day/Night mode.
5.4Timeparameters
Parameter
Value Description Default
51 q Numberofringsbeforepick-up2
q –Numberofincoming call ringsbeforeacall ispicked up. The numbercan
be set from1to9.

19
ParameterValue Description Default
52 d Maximumcallduration 2
d –maximumtimeinminutesforwhichacallmaylast.
Thistimecan be extended during acallbydialling
Prolong Call digitfromtelephone (*or#).Time
setting ispertable.
ParameterValue Description Default
53 w timebetweenbuttonpresses 2
w –max.time[sec] between button presses[range 1-9]
- relay closing –iftimebetween twonextpressesisbiggerthan w
time,the code isnotevaluated correctly.
- dialling –ifthe button pressed isthe firstpasswordnumberfor
switchclosing, sothe choiceisdelayed bythis w time.
ParameterValue Description Default
54 z Off hooktimebeforenewcall2
z –time[sec]forwhichthe unitwill hang up,beforerepeatdialling (button
pressing during callordialling, busytone detection)[range 1-5]
ParameterValue Description Default
55 z Callstarttime1
z –time[sec]afterunitgoesoff hookbeforedialling [range 1-5]. Thistimeis
different foreachPBX, butmost PBXs usuallymanage toprocess dialling
up to2secondsafterline off hook.
Parameter
Value Description Default
56 h Numberofringsbeforehanging upor
groupmodeswitching 12
h –specifiesthe amountoftimespentringing beforethe unithangsup and
triesthe nextnumber.
time
[min] choice
0,5 0
1-9 1-9
15 *
30 #

20
Parameter
Value Description Default
57 t DTMFtoneduration(ms) 5(100ms)
58 m Spaceduration betweenDTMFtones
(ms) 5(100ms)
59 f Recall duration (ms) 1(100ms)
50 p Pauseduration (ms) 8(800ms)
t –DTMFtone duration isdetermined bythe formula:
(enterednumber +5)x10 =toneduration [ms]
[range 1-0i.e. 60-150ms]
m – Spaceduration betweenDTMFtones isdetermined bythe formula:
(enterednumber +5)x10 =gapduration [ms]
[range 1-0i.e. 60-150ms]
f –Recalldurationisdetermined bythe formula:
enterednumber x100 =Recallduration [ms]
[range 1-6i.e. 100-600ms]
p –Pauseduration isdetermined bythe formula:
enterednumber x100 =pauseduration [ms]
[range 5-0i.e. 500-1000ms]
– ptimeissimultaneouslythe duration ofinterdigit gap atpulsedialling.
Parameter
Value Description Default
5*1 x Numberofbusytonesbeforehahg up 6
x –isnumberofbusytonesbeforehahg up bynexttable:
x numberof busytones x numberof busytones
1
4 5
8
2
4
6
8
3
6 7
10
4
6 8
10