Alpine DVE-5207 User manual

SERVICE MANUAL
DVD-VIDEO Player
3 / 05-A
68E38377S01
DVE-5207
DIGITAL VIDEO
TM

<Cautions for Safe Repair Work>
The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Do not look squarely into the laser light Fuse Caution
coming from the pickup. Always use a designated fuse.
You may loose you sight. Use of an incorrect fuse may result in a fire.
Do not allow wiring to be caught in the Battery Caution
screw/chassis. Use the designated battery.
If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the battery.
cause a short circuit, resulting in a fire. An incorrect battery or an improperly connected or
seated battery may result in a fire.
High Temperature Caution Designated Parts Caution
Touching the heat sink may cause severe burns. Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.
Reverse Power Supply Connections o
r
Wiring Caution
Misconnections Caution Ensure that the wiring is correct when rewiring to
Reverse power supply connections or prevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.
Soldering Caution Wear Glove
s
Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury
burns. from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product
Please be careful for repair.
If you ignore this symbol and handle the product incorrectly or unsafely,
injury or only material damage may result.
If you ignore this symbol and handle the product incorrectly or unsafely,
serious injury or death may result.
Warning
Caution
Warning
Caution
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
- 2 -

$1,%1,&1,#2
$1
$1
101
103 -1
102
103 -2 103 -3
106 -1 106 -2 106 -3
107 -1 107 -2 107 -3 107 -4 107 -5 107 -6 107 -7
103 -4 103 -5 103 -6
104 105
X1
X4 X1 X1 X1
X1
X1
X1
X1
X1
X1
$1,%1,&1,#2
109
%1,&1,#2
$1,%1,&1,#2
108
108
105
104 106
107
$1
$1
$1,%1,&1,#2
$1,%1,&1,#2
%1,&1,#2
$1
103
$1,%1,&1,#2
102 101
109
%1,&1,#2
Top Side
NOTE:$1 For European Model Only,
%1 For General Foreign/REGION-3 Model Only,
&1:For General Foreign/REGION-4 Model Only,
#2:For Chinese Model Only,
Others:Common.
X4 X4 X4 X4
X4 X4 X2
X2 X1 X1
Packing Assembly Parts List
Part No. Part No.
101 01T25634Y02 ASSY,WIRE VIDEO 2000 #2 103-6 60S70585F01 BAT,LIT.3V (CR2025)
102 01T15832W11 ASSY,RCA CABLE 2.0-2 $1 104 15D00529K02 CASE,INNER
$1 103-1 03S60820Y16 SCR,MCH 5X8 ZN A %1 104 15D00529K02 CASE,INNER
%1 103-1 03S60820Y16 SCR,MCH 5X8 ZN A &1 104 15D00529K02 CASE,INNER
&1 103-1 03S60820Y16 SCR,MCH 5X8 ZN A #2 104 15D00529K02 CASE,INNER
#2 103-1 03S60820Y16 SCR,MCH 5X8 ZN A $1 105 01T75472Y01 ASSY,REMO RUE-4201
$1 103-2 46A70667Y01 STUD,BOLT %1 105 01T75472Y01 ASSY,REMO RUE-4201
%1 103-2 46A70667Y01 STUD,BOLT &1 105 01T75472Y01 ASSY,REMO RUE-4201
&1 103-2 46A70667Y01 STUD,BOLT #2 105 01T75472Y01 ASSY,REMO RUE-4201
#2 103-2 46A70667Y01 STUD,BOLT $1 106-1 07A50414W03 BKT MTG.BASE
$1 103-3 36A11113W01 CAP,RUBBER(A) $1 106-2 07B81278W01 BKT,SIDE (L)
%1 103-3 36A11113W01 CAP,RUBBER(A) $1 106-3 07B81278W02 BKT,SIDE (R)
&1 103-3 36A11113W01 CAP,RUBBER(A) $1 107-1 03D40121T67 SCR,MCH(W/W)M5X10 A
#2 103-3 36A11113W01 CAP,RUBBER(A) $1 107-2 02-02981Z01 NUT,CUS 6X6 ZB A
$1 103-4 02B70670Y01 NUT,CUS 5X5.5 ZN A $1 107-3 03B90962F03 BOLT,HEX M6X50 A
%1 103-4 02B70670Y01 NUT,CUS 5X5.5 ZN A $1 107-4 02-02949Z01 NUT,CUS 6X9.5 ZB A
&1 103-4 02B70670Y01 NUT,CUS 5X5.5 ZN A $1 107-5 04-02958Z01 WAS,SPR6.1X12.2X1.5A
#2 103-4 02B70670Y01 NUT,CUS 5X5.5 ZN A $1 107-6 03S70694Y03 SCR,TPG 5X15 ZB A
$1 103-5 03A60836Y01 SCR,CUS 5X7 ZN A $1 107-7 75T58346F01 PAD,MAGIC TAPE
%1 103-5 03A60836Y01 SCR,CUS 5X7 ZN A $1 108 68-02278Z32 O/M AOEU AODL
&1 103-5 03A60836Y01 SCR,CUS 5X7 ZN A %1 108 68-02278Z33 O/M AAO AODL
#2 103-5 03A60836Y01 SCR,CUS 5X7 ZN A &1 108 68-02278Z33 O/M AAO AODL
$1 103-6 60S70585F01 BAT,LIT.3V (CR2025) #2 108 68-02770Z09 O/M,AOCH 5207
%1 103-6 60S70585F01 BAT,LIT.3V (CR2025) %1 109 01T15694Y05 ASSY,REMOCON EYE
&1 103-6 60S70585F01 BAT,LIT.3V (CR2025) &1 109 01T15694Y05 ASSY,REMOCON EYE
#2 109 01T15694Y05 ASSY,REMOCON EYE
NOTE:$1:For European Model Only, %1:For General Foreign/REGION-3 Model Only,&1:For General Foreign/REGION-4 Model Only,
#2:For Chinese Model Only, Others:Common.
Packing Method View
Description
No. No.
Symbol SymbolDescription
DVE-5207
- 4 -

•Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
•Also refer to the operating instructions of the other products in the system.
•Aremote control eye is needed when a monitor made by another company is connected.
White/Brown REMOTE IN
GNDBlack
BATTERY
Fuse
(7.5A)
Yellow
IGNITIONRed
Cable Color Cable Specifications
Yellow
White (L)
Red (R)
White/
Brown
Black
Yellow
Red
• Video Output Connector
This connector is used in combination with the video inputs
of another video product (AV head unit or TV monitor).
• Audio Output Connectors
These connectors are used in combination with a head unit
or TV monitor with audio input connectors, if the digital
output terminal is not connected.
• Remote Control Input Lead
This lead is used in combination with an ALPINE monitor
with a remote control output lead.
• Ground Lead
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
• Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.
• Digital Output Terminal (Optical)
This terminal is used to connect DVE-5207 to ALPINE
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.
• Remote Control Eye Jack
Connect the remote control eye to this jack. Not used when
using a monitor with a built-in remote control sensor unit. A
remote control eye is needed when a monitor made by
other company is connected.
To remote control
output lead
Connect to a metal
part of chassis body
with a screw
Remote Control Eye
Ignition Key
System Connections DVE-5207
(North American Model Only)
- 5 -

System Example
Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H701, PXA-H900, etc.)
and ALPINE TV Monitor
EQ/DIV
•Also refer to the operating instructions of the other products in the system.
ALPINE TV Monitor
(Sold Separately)
Digital Audio Processor
PXA-H701 etc
(Sold Separately)
AUX Video Input
Te r minal (AUX1)
Remote Control
Input Lead
(White/Brown)
Remote Control
Output Lead (AUX1)
(White/Brown)
Video Output
Connector
RCA Extension Cable (Included)
Audio Output
Connector
RCA Extension
Cable (Included)
DVD Player
DVE-5207
Digital Output
Te r minal
(Optical)
Fiber Optic Cable
(Sold separately
4915/4916)
Digital Input
Te r minal (Optical)
(for DVD Player)
Ai-NET Input
Connector
System Switch
When connecting a digital audio
processor using Ai-NET feature, place
this switch in the EQ/DIV position.
Head Unit
with Ai-NET
(Sold Separately)
Ai-NET
Input Connector
ALPINE TV Tuner
(Sold Separately)
*Only when Digital Audio Processor is not connected
In this case, the system switch of the head unit is set to “NORM.”
Ai-RCA
Conversion Cable
(Sold separately)
DVE-5207
- 6 -

Connecting Another Manufacturer’s TV Monitor
•Remote control eye is required.
•Also refer to the operating instructions of the other products in the system.
•When you connecting another manufacturer’s TV monitor, the remote control input lead (White/Brown), is not used.
TV Monitor
(Sold Separately)
TV Tuner
(Sold Separately)
AUX Video Input
Te r minal (AUX1)
Video Output
Connector
Remote Control
Input Lead
(White/Brown)
RCA Extension
Cable (Included) Audio Output
Connector
RCA Extension Cable (Included)
AUX Audio Input
Te r minal (AUX1)
DVD Player
DVE-5207
Remote Control Eye
(Included)
Not Used
Remote Control
Eye Jack
DVE-5207
- 7 -

•Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
•Also refer to the operating instructions of the other products in the system.
•Aremote control eye is needed when a monitor made by another company is connected.
White/Brown REMOTE IN
GNDBlack
BATTERY
Fuse
(7.5A)
Ye llow
IGNITION
Red
Cable Colour Cable Specifications
Ye llow
White (L)
Red (R)
White/
Brown
Black
Ye llow
Red
•
Video Output Connector
This connector is used in combination with the video inputs
of another video product (AV head unit or TV monitor).
• Audio Output Connectors
These connectors are used in combination with a head unit
or TV monitor with audio input connectors, if the digital
output terminal is not connected.
• Remote Control Input Lead
This lead is used in combination with an ALPINE monitor
with a remote control output lead.
• Ground Lead
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
• Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.
• Digital Output Terminal (Optical)
This terminal is used to connect DVE-5207 to ALPINE
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.
• Remote Control Eye Jack
Connect the remote control eye to this jack. Not used when
using a monitor with a built-in remote control sensor unit. A
remote control eye is needed when a monitor made by
other company is connected.
To remote control
output lead
Connect to a metal
part of chassis body
with a screw
Remote Control Eye
(Sold Separately)
Ignition Key
DVE-5207
(European Model Only)
- 8 -

Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H701, PXA-H900, etc.)
and ALPINE TV Monitor
EQ/DIV
•Also refer to the operating instructions of the other products in the system.
ALPINE TV Monitor
(Sold Separately)
Digital Audio Processor
PXA-H701 etc
(Sold Separately)
AUX Video Input
Terminal (AUX1)
Remote Control
Input Lead
(White/Brown)
Remote Control
Output Lead (AUX1)
(White/Brown)
Video Output
Connector
RCA Extension Cable (Included)
Audio Output
Connector
*Only when Digital Audio Processor is not connected
In this case, the system switch of the head unit is set to “NORM.”
RCA Extension
Cable (Included)
DVD Player
DVE-5207
Digital Output
Te r minal
(Optical)
Fiber Optic Cable
(Sold separately
4915/4916)
Digital Input
Te r mi nal (Optical)
(for DVD Player)
Ai-NET Input
Connector
System Switch
When connecting a digital audio
processor using Ai-NET feature, place
this switch in the EQ/DIV position.
Head Unit
with Ai-NET
(Sold Separately)
Ai-NET Input
Connector
ALPINE TV Tuner
(Sold Separately)
System Example
Ai-RCA Conversion
Cable (Sold Separately)
DVE-5207
- 9 -

Connecting Another Manufacturer’s TV Monitor
•Remote control eye is required.
•Also refer to the operating instructions of the other products in the system.
•When you connecting another manufacturer’s TV monitor, the remote control input lead (White/Brown), is not used.
TV Monitor
(Sold Separately)
TV Tuner
(Sold Separately)
AUX Video Input
Terminal (AUX1)
Video Output
Connector
Remote Control
Input Lead
(White/Brown)
RCA Extension
Cable (Included) Audio Output
Connector
RCA Extension Cable (Included)
AUX Audio Input
Terminal (AUX1)
DVD Player
DVE-5207
Remote Control Eye
(Sold Separately)
Not Used
Remote Control
Eye Jack
DVE-5207
- 10 -

• Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.
• A remote control eye is needed when a monitor made by another company is connected.
White/Brown REMOTE IN
GNDBlack
BATTERY
Fuse
(7.5A)
Yellow
IGNITION
Red
Cable Color Cable Specifications
Yellow
White (L)
Red (R)
White/
Brown
Black
Yellow
Red
• Video Output Connector
This connector is used in combination with the video inputs
of another video product (AV head unit or TV monitor).
• Audio Output Connectors
These connectors are used in combination with a head unit
or TV monitor with audio input connectors, if the digital
output terminal is not connected.
• Remote Control Input Lead
This lead is used in combination with an ALPINE monitor
with a remote control output lead.
• Ground Lead
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
• Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.
• Digital Output Terminal (Optical)
This terminal is used to connect DVE-5207 to ALPINE
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.
• Remote Control Eye Jack
Connect the remote control eye to this jack. Not used
when using a monitor with a built-in remote control sensor
unit. A remote control eye is needed when a monitor made
by other company is connected.
To remote control
output lead
Connect to a metal
part of chassis body
with a screw
Remote Control Eye
Ignition Key
DVE-5207
(General Foreign Model Only)
- 11 -

EQ/DIV
• Also refer to the operating instructions of the other products in the system.
ALPINE TV Monitor
(Sold Separately)
Digital Audio Processor
PXA-H701 etc
(Sold Separately)
AUX Video Input
Terminal (AUX1)
Remote Control
Input Lead
(White/Brown)
Remote Control
Output Lead (AUX1)
(White/Brown)
Video Output
Connector
RCA Extension Cable (Included)
Audio Output
Connector
*Only when Digital Audio Processor is not connected
In this case, the system switch of the head unit is set to “NORM.”
RCA Extension
Cable (Included)
DVD Player
DVE-5207
Digital Output
Terminal
(Optical)
Fiber Optic Cable
(Sold Separately
4915/4916)
Digital Input
Terminal (Optical)
(for DVD Player)
Ai-NET Input
Connector
System Switch
When connecting a digital audio
processor using Ai-NET feature, place
this switch in the EQ/DIV position.
Head Unit
with Ai-NET
(Sold Separately)
Ai-NET Input
Connector
ALPINE TV Tuner
(Sold Separately)
System Example
Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H701, PXA-H900, etc.)
and ALPINE TV Monitor
Ai-RCA
Conversion Cable
(Sold Separately)
DVE-5207
- 12 -

Connecting Another Manufacturer’s TV Monitor
• Remote control eye is required.
• Also refer to the operating instructions of the other products in the system.
• When you connecting another manufacturer’s TV monitor, the remote control input lead (White/Brown), is not used.
TV Monitor
(Sold Separately)
TV Tuner
(Sold Separately)
AUX Video Input
Terminal (AUX1)
Video Output
Connector
Remote Control
Input Lead
(White/Brown)
RCA Extension
Cable (Included) Audio Output
Connector
RCA Extension Cable (Included)
AUX Audio Input
Terminal (AUX1)
DVD Player
DVE-5207
Remote Control Eye
(Included)
Not Used
Remote Control
Eye Jack
DVE-5207
- 13 -

Specifications
<CD/DVD SECTION>
System ..................................................................................................................................... Optical (DVD System)
(CD AUDIO)
Channel Balance (1kHz, TCD-782) .................................................................................................................. 0±3dB
Distortion (1kHz, TCD-782) ................................................................................................................................ 0.3%
Frequency Response (Ref. 1kHz, TCD-782) ......................................................................................... 17Hz : 0±3dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : 0±4dB
S/N Ratio (TCD-782) .......................................................................................................................................... 75dB
Separation (1kHz, TCD-782) .............................................................................................................................. 70dB
De-Emphasis (Ref. 1kHz, TCD-782) .................................................................................................. 4kHz : -20±3dB
16kHz : -20±3dB
(MP-3 AUDIO)
Channel Balance (1kHz, SCD-5100 (Folder2-128kbps)) ................................................................................. 0±3dB
Distortion (1kHz, SCD-5100 (Folder2-128kbps)) ............................................................................................... 0.3%
Frequency Response (Ref. 1kHz, SCD-5100 (Folder2-128kbps)) ........................................................ 17Hz : 0±3dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : 0±4dB
S/N Ratio (SCD-5100 (Folder2-128kbps)) ......................................................................................................... 75dB
Separation (1kHz, SCD-5100 (Folder2-128kbps)) ............................................................................................. 70dB
(DVD-VIDEO)
*AUDIO PRE-OUT : Title Number 4/Audio Stream 2/LPCM 48k
Channel Balance (1kHz, TDV-540A) ............................................................................................. Chapter 1 : 0±3dB
Distortion (1kHz, TDV-540A) ............................................................................................................ Chapter 1 : 0.3%
Frequency Response (Ref. Chapter 9/999Hz, TDV-540A) ................................................. Chapter 6 : 17Hz : 0±4dB
Chapter 8 : 127Hz : 0±2dB
Chapter 13 : 10.007kHz : 0±2dB
Chapter 15 : 19.997kHz : 0±4dB
S/N Ratio (Ref. Chapter 1, TDV-540A) ............................................................................................ Chapter 2 : 80dB
Separation (1kHz, TDV-540A) ........................................................................... Chapter 3(L Only), 4(R Only) : 65dB
*VIDEO PRE-OUT : NTSC/Terminating Resistance 75 ohm
: PAL/Terminating Resistance 75 ohm
Luminance Level (TDV-540A Title 2/Chapter 6 (NTSC)) ................................................................................. 1±0.1V
(V-509 Title 4/Chapter 3 (PAL))
Luminance Frequency Response (6MHz, TDV-540A Title 2/Chapter 8 (NTSC)) ............................................ -4±2dB
(6MHz, V-509 Title 5/Chapter 2 (PAL))
Luminance Signal S/N Ratio (TDV-540A Title 2/Chapter 4 (NTSC)) .................................................................. 60dB
(V-509 Title 4/Chapter 4 (PAL))
DVE-5207
- 14 -

(VIDEO-CD)
*AUDIO (MPEG Audio) : Title Number 4/Audio Stream 2/LPCM 48k
Channel Balance (1kHz, TVD-581A or HLV-402) ............................................................................................. 0±3dB
Distortion (1kHz, TVD-581A or HLV-402) ........................................................................................................... 0.3%
Frequency Response (Ref. 1kHz, TVD-581A or HLV-402) .................................................................... 21Hz : 0±4dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : 0±4dB
S/N Ratio (TVD-581A or HLV-402) ..................................................................................................................... 80dB
Separation (1kHz, TVD-581A or HLV-402) ......................................................................................................... 65dB
*VIDEO : NTSC/Terminating Resistance 75 ohm
: PAL/Terminating Resistance 75 ohm
Luminance Level (TVD-581A or HLV-402 (NTSC), HLV-402 (PAL)) ............................................................. 1±0.15V
Luminance Frequency Response (2MHz, TVD-581A or HLV-402 (NTSC), HLV-402 (PAL)) ........................... -2±2dB
Luminance Signal S/N Ratio (TVD-581A or HLV-402 (NTSC), HLV-402 (PAL)) ................................................. 55dB
<DVD Deck Mechanism>
Test Disc ................................................................................................... for Single layer disc valuation : TDV-520C
for Dual layer disc valuation : TDV-540C
RF Waveform Amplitude ...................................................................................................................... 1.125±0.5Vp-p
Quantity of Jitter (all-T standard deviation) ....................................................................................... Less than 14.0%
Measurement Angle Range ............................................................................................... Front and Rear : -20°~50°
Right and Left : ±20°
Laser Current ................................................................................................................................. Initial value ±2mA
(The initial value of laser current is indicated on the Flexible Cable.)
<Pickup>
Wave Length ......................................................................................................................................... DVD : 665nm
CD : 800nm
Laser Power ................................................................................................................................................. CLASS II
<GENERAL>
Power Supply ............................................................................................................................................... DC14.4V
Output Level (Ref. 1kHz) /Impedance .................................................................... CD : 1200±200mV / ch / 10kohm
MP-3 : 1200±200mV / ch / 10kohm
DVD-VIDEO : 1200±200mV / ch / 10kohm
VIDEO-CD : 1200±200mV / ch / 10kohm
Back Up Current ("ACC OFF" after 1 minute) ..................................................................................................... 5mA
Dimensions (W x H x D) ................................................................................................ Chassis : 178 x 50 x 158mm
Nose : 170 x 46 x 19.5mm
Weight ................................................................................................................................................................ 1.5kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
DVE-5207
- 15 -

DVE-5207
Extension Cable
*Always connect the Extension Cable when making checks of voltage and repair.
MAIN P.W.Board DVD Deck Mechanism
DV37M150
CB101
CB103
CH501
CB501 CB502
(1)
(2)
CB401
(3)
(1) 01E38367S01
(2) 01E37778S01
(3) 01V38366S01
FRONT P.W.Board
- 16 -

DVE-5207
Block Diagram
RESET
POWER SUPPLY
BLOCK
Batt-Det / VDD
PWR-ON / DVD SERVO
POWER CONNECTOR
MUTE
DRIVER
EJECT Light
EJECT
SW
RESET
SW
BAT DET SW
ACC DET
Main CPU
MUTE V-OUT
Pre-OUT
BATT
ACC
LED +B
A-Mute
AUDIO +B
DV37M150
(DVD Mechanism)
Door Light
SWD+3.3V
Buffer
Buffer
Audio DAC
M-7V
DC-3V
M-5V
DC-1V
SRAM+3
MUTE
REMOTE
CONTROL
optout
- 17 -

Orange Color Pattern:Component Side Pattern
Blue Color Pattern:Foil Side Pattern
DVE-5207
Parts Layout on P.W.Boards and Wiring Diagram(1/3)
MAIN P.W.Board
(Component Side View)
FRONT P.W.Board
(Component Side View)
ASSY, WIRE PWR RV5210
ET801
(7 5A)
FUSE TRANS
WHT/BRN
YEL (BATT)
BLK (GND)
(REMOTE IN)
RED (ACC)
ET102
ASSY, RCA WIRE 5207
(Lch OUT)
WHT
SHIELD
RED
(Rch OUT)
SHIELD
YEL
(COM OUT)
SHIELD
51
To CB102
To FRONT P.W.Board (CB401)
141
To CH501
From DV-MAIN P.W.Board (CB501)
145
To CB103
From DV-MAIN P.W.Board (CB502)
124
To CB101
To CB801
1 4
4
5
3
1
BE
35
12
21
53
B
E
53
21
32
15
64
31
1
34
5
5
43
1
1
2
3
4
5
AFGEDCB
- 18 -

Orange Color Pattern:Component Side Pattern
Blue Color Pattern:Foil Side Pattern
DVE-5207
Parts Layout on P.W.Boards and Wiring Diagram(2/3)
MAIN P.W.Board (Foil Side View)
FRONT P.W.Board
(Foil Side View)
113
To CB401
14 2
From MAIN P.W.Board (CH501)
#2 : For Chinese Model Only,
&1 : For General Foreign / Region4 Model Only,
$1 : For European Model Only,
%1: For General Foreign / Region3 Model Only,
Others : Common.
NOTE : #1 : For North American Model Only,
E
B
13
B
E
3
51
2
5
1
51
23
15
323
51
213
4664
31
5
1
1
5
5
1
1
5
5
1
1
5
5
1
1
5
B E
2 15
3
E
B
#1
&1
$1
#2
%1
%1$1#1
#2&1
$1%1 #1&1 #2
1
2
3
4
5
AFGEDCB
- 19 -

Orange Color Pattern:Component Side Pattern
Blue Color Pattern:Foil Side Pattern
DVE-5207
Parts Layout on P.W.Boards and Wiring Diagram(3/3)
DV-MAIN P.W.Board
(Foil Side View)
FPC,LOAD P.W.Board
(Foil Side View)
LIMIT P.W.Board
(Foil Side View)
DV-MAIN P.W.Board
(Component Side View)
The patterns should be short-circuited,
when the PICKUP is removed
from DVD Mechanism.
The patterns should be short-circuited,
when the PICKUP is removed
from DVD Mechanism.
e
e
To
To e
e
To b
b
(5V-250mA)
M102
MOTOR,24C0303020
(5V-350mA)
M103
MOTOR,MSDV020L01
(DC6.5V)
MOTOR,M1N10FB95G
M101
M
To CB801
28 1
From MAIN P.W.Board
To CB502
24 1
(CB101)
To CB861
24 1
To CB501
1 45
From MAIN P.W.Board (CB103)
128 193
129 192
65 256
64 1
51
34
E B E B
51
23
28 22 21
87
1
1
10 11
20 20 1110
1
B E E B
85
41
B
E
B
EE B
E
BE
B
3 15
4
HD101
PICKUP,ED21A510
a
b
To
b
28
1
1
2
3
4
5
AFGEDCB
- 20 -

JK501
HSJ1102 01 520
Z502
NFE61PT472C1H9L
TP521
TP520
TP524
TP523
C512
0.1
TP523
TP519
TP518
TP522
ZD501
RD5.1MB2
R530
4 7k
R527
3 9k
R527
3.9k
C510
0.1
C511 0.022
E506
220/6.3
E507
330/6.3
C513
0.022
C509
0.047
R526
22k
R525
22k
IC503
BD5224G
R528 180
R529 180
Z501
NFM21HC101U1H3
IC504
TA48M033F
IC502
TC7SET08FU
R524
22k
R523
22k
R508
0.022
TP513
TP514
TP515
TP516
TP517
C519
0 1
C520
N U
CH501
BTFW14R-3RSTE1
C501
N.U.
R501
N.U.
R502
N.U.
R511
N.U.
E503
N.U.
E503
N.U.
E505
N U Q503
N U
Q504
N U
Q505
N U
R512
N U
E504
N.U.
D502
N U
E501
N U
D505
N U
D506
N.U.
D507
N.U.
D504 N.U.
C504 N.U.
R515 N.U.
C503 N.U C503 N.U.
R516 N.U.
R505 N.U.
E502 N.U.
R504 N.U. D501 N.U.
Q501
N U
TP501
R503
N U
Q502
N U
R510
N U
R513
15k
R514
30k
R509
15k
R508 1k
R507 1k
C502 N.U.
TH501 100k
IC501
UPD70F361YGC 8EA A
TP503
TP504
TP505
TP506
TP507
TP508
C522
0.1
R521
22k
R535 0
TP502
R553 1k
R506 1k
C518 0 022
R554 1k
R558
1k
R519
1k
R558
N U
RA505 1k
RA504 1k
R532
47k
Q506 FMC3
C514 0.022 C515 0.022 C516 0.022
C531 47k
RA508
1k
C505
4 7
C506
12p XL501
5.00MHz
C507
15p
R520
47k
R537
47k
RA509
100
R567
22k
R518
22k
R517
22k
R568
22k
RA502 1k
RA501 1k
R557 1k
C517 0.022
R556 1k R555 1k
R562
*
R561 *
R563 *
R565 *
R522
47k
R564
*
R566
*
- 21 -