Alstom Micom P14DB User manual

MiCOM P14DB
© - ALSTOM 2016. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it
is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is
subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.
MICS
Model Implementation Conformance
Statement
Platform Hardware Version: A
Platform Software Version: 57
Publication Reference: P14DB-MC-EN-7

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
1
1. MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
1.1 Introduction
This specification is the Model Implementation Conformance Statement (MICS) and presents
the top-level IEC 61850 data model that has been implemented. The definitions of all used
Logical Nodes and their associated Common Data Classes, components and associated
enumerated values are also included for completeness.
The reader is expected to be conversant with the terminology presented within the IEC
61850 part 7 series of specifications.
1.2 Objective
To provide comprehensive details of the standard data object model elements supported by
the device. The MICS is conformant to the devices associated ICD (Substation
Configuration Language) file, according to part 6 of the IEC 61850 standards. The layout of
the presented tables within this document are conformant to the part 7 series of the IEC
61850 standard specifications with the following exceptions:
• The "Trigger Options" field is not presented
• The "M/O" field is not present as the definitions are as deployed within the model
• An additional column "X" is used to signify ALSTOM custom attributes
1.3 Logical Device definitions
The MiCOM relay implements an IEC 61850 server that can contain one or more Logical
Devices. Each Logical Device contains a data model built from instances of specific Logical
Nodes and must consist of at least an instance of the LPHD Logical Node (which is
responsible for providing physical device information) and an instance of the LLN0 Logical
Node (for addressing common issues across the Logical Device).
The IEC 61850 data model is contained within the Logical Devices detailed in the table
below. All MiCOM devices will name the supported Logical Devices consistently to ensure
that data model variables with the same purpose will have the same name within each
MiCOM server.
Logical Device
Comment/Usage
Control P14DB Controls Domain
Measurements P14DB Measurements Domain
Protection P14DB Protection Domain
Records P14DB Records Domain
System P14DB System Domain
1.3.1 IEC 61850 Logical Device data model
The IEC 61850 Logical Device top-level data model consists of instances of Logical Nodes.
The data model name for a Logical Node instance is constructed from an optional prefix
(known as the wrapper), the Logical Node name, and an instance ID (or suffix).
The presented data model is in an alphabetically sorted order, rather than a logical order,
because this is the natural order of the data when presented by a native MMS browser.
(Higher level browsers can of course impart any ordering that they desire).
LD
LN Instance
LN Type
Description
Control
CILO1 CILO_INTERLOCK XCBR Interlocking
LLN0 LLN0_STANDARD Controls Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
XCBR1 XCBR_BASIC Circuit Breaker Monitoring

P14DB
-MC-EN-7
MICS
(
MC) 2 MiC
OM 40 Agile P14DB
LD
LN Instance
LN Type
Description
Measurements
LLN0 LLN0_STANDARD Measurements Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
PriAvgMSTA1 MSTA_V Primary Metering Statistics (Moving
Average Voltage)
PriFouMMXU1 MMXU_FOURIER_P145 Primary Fourier Measurements
PriMMTR1 MMTR_PRIV Primary based metering quantities
PriMSQI1 MSQI_ALL Primary Sequence Measurements
PriMSTA1 MSTA_I_W_VAR Primary Metering Statistics
PriRmsMMXU1 MMXU_RMS_P145 Primary RMS Measurements
SecAvgMSTA1 MSTA_V Secondary Metering Statistics (Moving
Average Voltage)
SecFouMMXU1 MMXU_FOURIER_P145 Secondary Fourier Measurements
SecMMTR1 MMTR_PRIV Secondary based metering quantities
SecMSQI1 MSQI_ALL Secondary Sequence Measurements
SecMSTA1 MSTA_I_W_VAR Secondary Metering Statistics
SecRmsMMXU1 MMXU_RMS_P145 Secondary RMS Measurements
Protection
CbfRBRF1 RBRF_EXTTRIP CB Fail 1
CbfRBRF2 RBRF_EXTTRIP CB Fail 2
DfpPFRC1 PFRC_NO_SEG df/dt> 1 Frequency Rate of Change
DfpPFRC2 PFRC_NO_SEG df/dt> 2 Frequency Rate of Change
DfpPFRC3 PFRC_NO_SEG df/dt> 3 Frequency Rate of Change
DfpPFRC4 PFRC_NO_SEG df/dt> 4 Frequency Rate of Change
DfpPFRC5 PFRC_NO_SEG df/dt> 5 Frequency Rate of Change
DfpPFRC6 PFRC_NO_SEG df/dt> 6 Frequency Rate of Change
DfpPFRC7 PFRC_NO_SEG df/dt> 7 Frequency Rate of Change
DfpPFRC8 PFRC_NO_SEG df/dt> 8 Frequency Rate of Change
DfpPFRC9 PFRC_NO_SEG df/dt> 9 Frequency Rate of Change
EfdPTOC1 PTOC_NEU IN2> 1 Earth Fault (Derived)
EfdPTOC2 PTOC_NEU IN2> 2 Earth Fault (Derived)
EfdPTOC3 PTOC_NEU IN2> 3 Earth Fault (Derived)
EfdPTOC4 PTOC_NEU IN2> 4 Earth Fault (Derived)
EfmPTOC1 PTOC_NEU IN1> 1 Earth Fault (Measured)
EfmPTOC2 PTOC_NEU IN1> 2 Earth Fault (Measured)
EfmPTOC3 PTOC_NEU IN1> 3 Earth Fault (Measured)
EfmPTOC4 PTOC_NEU IN1> 4 Earth Fault (Measured)
FrqPTOF1 PTOF_NO_SEG F> 1 Over Frequency
FrqPTOF2 PTOF_NO_SEG F> 2 Over Frequency
FrqPTOF3 PTOF_NO_SEG F> 3 Over Frequency
FrqPTOF4 PTOF_NO_SEG F> 4 Over Frequency
FrqPTOF5 PTOF_NO_SEG F> 5 Over Frequency
FrqPTOF6 PTOF_NO_SEG F> 6 Over Frequency
FrqPTOF7 PTOF_NO_SEG F> 7 Over Frequency
FrqPTOF8 PTOF_NO_SEG F> 8 Over Frequency
FrqPTOF9 PTOF_NO_SEG F> 9 Over Frequency

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
3
LD
LN Instance
LN Type
Description
FrqPTUF1 PTUF_NO_SEG F< 1 Under Frequency
FrqPTUF2 PTUF_NO_SEG F< 2 Under Frequency
FrqPTUF3 PTUF_NO_SEG F< 3 Under Frequency
FrqPTUF4 PTUF_NO_SEG F< 4 Under Frequency
FrqPTUF5 PTUF_NO_SEG F< 5 Under Frequency
FrqPTUF6 PTUF_NO_SEG F< 6 Under Frequency
FrqPTUF7 PTUF_NO_SEG F< 7 Under Frequency
FrqPTUF8 PTUF_NO_SEG F< 8 Under Frequency
FrqPTUF9 PTUF_NO_SEG F< 9 Under Frequency
LLN0 LLN0_PROT Protection Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
NgcPTOC1 PTOC_NO_SEG I2> 1 Negative Sequence
NgcPTOC2 PTOC_NO_SEG I2> 2 Negative Sequence
NgcPTOC3 PTOC_NO_SEG I2> 3 Negative Sequence
NgcPTOC4 PTOC_NO_SEG I2> 4 Negative Sequence
NgvAvgPTOV1 PTOV_NO_SEG V2avg> 1 Average Negative Sequence
NgvAvgPTOV2 PTOV_NO_SEG V2avg> 2 Average Negative Sequence
NgvPTOV1 PTOV_NO_SEG V2> 1 Negative Sequence
NgvPTOV2 PTOV_NO_SEG V2> 2 Negative Sequence
OcpPTOC1 PTOC_SEG I> 1 Overcurrent
OcpPTOC2 PTOC_SEG I> 2 Overcurrent
OcpPTOC3 PTOC_SEG I> 3 Overcurrent
OcpPTOC4 PTOC_SEG I> 4 Overcurrent
OcpPTOC5 PTOC_SEG I> 5 Overcurrent
OcpPTOC6 PTOC_SEG I> 6 Overcurrent
PsvAvgPTOV1 PTOV_NO_SEG V1avg> 1 Average Positive Sequence
PsvAvgPTOV2 PTOV_NO_SEG V1avg> 2 Average Positive Sequence
PsvPTOV1 PTOV_NO_SEG V1> 1 Positive Sequence
PsvPTOV2 PTOV_NO_SEG V2> 1 Positive Sequence
PsvPTUV1 PTUV_NO_SEG V1<1 Positive Sequence
PsvPTUV2 PTUV_NO_SEG V1<2 Positive Sequence
PTRC1 PTRC_NO_SEG Protection Trip Conditioning
SenEftPTOC1 PTOC_NEU ISEF> 1 Sensitive Earth Fault
SenEftPTOC2 PTOC_NEU ISEF> 2 Sensitive Earth Fault
SenEftPTOC3 PTOC_NEU ISEF> 3 Sensitive Earth Fault
SenEftPTOC4 PTOC_NEU ISEF> 4 Sensitive Earth Fault
ThmPTTR1 PTTR_NO_SEG Thermal Overload
VtpAvgPTOV1 PTOV_SEG Vavg> 1 Overvoltage
VtpAvgPTOV2 PTOV_SEG Vavg> 2 Overvoltage
VtpAvgPTUV1 PTUV_SEG Vavg< 1 Undervoltage
VtpAvgPTUV2 PTUV_SEG Vavg< 2 Undervoltage
VtpPhsPTOV1 PTOV_SEG V> 1 Overvoltage
VtpPhsPTOV2 PTOV_SEG V> 2 Overvoltage
VtpPhsPTOV3 PTOV_SEG V> 3 Overvoltage
VtpPhsPTUV1 PTUV_SEG V< 1 Undervoltage

P14DB
-MC-EN-7
MICS
(
MC) 4 MiC
OM 40 Agile P14DB
LD
LN Instance
LN Type
Description
VtpPhsPTUV2 PTUV_SEG V< 2 Undervoltage
VtpPhsPTUV3 PTUV_SEG V< 3 Undervoltage
VtpResPTOV1 PTOV_NEU VN> 1 Residual Overvoltage
VtpResPTOV2 PTOV_NEU VN> 2 Residual Overvoltage
VtpResPTOV3 PTOV_NEU VN> 3 Residual Overvoltage
ZrvAvgPTOV1 PTOV_NO_SEG V0avg> 1 Average Zero Sequence
ZrvAvgPTOV2 PTOV_NO_SEG V0avg> 2 Average Zero Sequence
Records
LLN0 LLN0_STANDARD Records Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
RDRE1 RDRE_BASIC Disturbance Recorder
System
AlmGGIO1 GGIO_ALM_96 Alarms
FnkGGIO1 GGIO_IND_3 Function Keys
GosGGIO1 GGIO_IND_32 GOOSE Input Signals
GosGGIO2 GGIO_IND_32 GOOSE Output Signals
LedGGIO1 GGIO_IND_11 Red LED Signals
LedGGIO2 GGIO_IND_11 Green LED Signals
LLN0 LLN0_SYSTEM System Logical Device
LPHD1 LPHD_STANDARD Physical Device Information
OptGGIO1 GGIO_IND_8 Opto Inputs
OrdRunGGIO1 GGIO_IND_64 Uniqueness of control "Order Running"
indications for Control operations
PloGGIO1 GGIO_IND_64_CTRL Controllable Inputs
RlyGGIO1 GGIO_IND_8 Output Contacts
1.4 Logical Node definitions
The definition tables for each of the Logical Nodes in the top-level data model are presented
in the following sub-sections.
The following table presents a summary of the Logical Node templates used across the
Logical Devices within the overall IEC 61850 product data model:
LN Type
(LN
Description
Name Space
CILO_INTERLOCK (CILO) Control Interlocking IEC 61850-7-
4:2003
GGIO_IND_8 (GGIO) Generic Process I/O (w.r.t 8 Indication Elements) IEC 61850-7-
4:2003
GGIO_ALM_96 (GGIO) Generic Process I/O (w.r.t 96 Alarm Elements) IEC 61850-7-
4:2003
GGIO_IND_11 (GGIO) Generic Process I/O (w.r.t 11 Indication Elements) IEC 61850-7-
4:2003
GGIO_IND_3 (GGIO) Generic Process I/O (w.r.t 3 Indication Elements) IEC 61850-7-
4:2003
GGIO_IND_32 (GGIO) Generic Process I/O (w.r.t 32 Indication Elements) IEC 61850-7-
4:2003
GGIO_IND_64 (GGIO) Generic Process I/O (w.r.t 64 Indication Elements) IEC 61850-7-
4:2003
GGIO_IND_64_CTRL (GGIO) Generic process I/O (w.r.t 64 Indications Ctrl i/p) IEC 61850-7-
4:2003
LLN0_SYSTEM (LLN0) System Logical Node 0 IEC 61850-7-
4:2003

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
5
LN Type
(LN
Description
Name Space
LLN0_PROT (LLN0) Protection Domain Logical Node 0 IEC 61850-7-
4:2003
LLN0_STANDARD (LLN0) General Logical Node 0 IEC 61850-7-
4:2003
LPHD_STANDARD (LPHD) Px40 Physical Device Information IEC 61850-7-
4:2003
MMTR_PRIV (MMTR) Metering IEC 61850-7-
4:2003
MMXU_FOURIER_P145 (MMXU) Standard measurements (w.r.t Fourier Values -
P145) IEC 61850-7- 4:2003
MMXU_RMS_P145 (MMXU) Standard measurements (w.r.t RMS Values - P145) IEC 61850-7-
4:2003
MSQI_ALL (MSQI) Sequence and imbalance (w.r.t Pos, Neq, Zero) IEC 61850-7-
4:2003
MSTA_V (MSTA) Metering Statistics (w.r.t Average Voltage) No
Current IEC 61850-7- 4:2003
MSTA_I_W_VAR (MSTA) Metering Statistics (w.r.t Current, Real + Reactive
Power - Average + Max values) IEC 61850-7- 4:2003
PFRC_NO_SEG (PFRC) Rate of change of frequency (w.r.t No Phase
Segregation) IEC 61850-7- 4:2003
PTOC_NEU (PTOC) Timed Overcurrent (w.r.t Neutral) IEC 61850-7-
4:2003
PTOC_NO_SEG (PTOC) Timed Overcurrent (w.r.t No Phase Segregation) IEC 61850-7-
4:2003
PTOC_SEG (PTOC) Timed Overcurrent (w.r.t Phase Segregation) IEC 61850-7-
4:2003
PTOF_NO_SEG (PTOF) Over frequency (w.r.t No Phase Segregation) IEC 61850-7-
4:2003
PTOV_NO_SEG (PTOV) Overvoltage (w.r.t Phase Segregation) IEC 61850-7-
4:2003
PTOV_SEG (PTOV) Overvoltage (w.r.t Phase Segregation) IEC 61850-7-
4:2003
PTOV_NEU (PTOV) Overvoltage (w.r.t Neutral) IEC 61850-7-
4:2003
PTRC_NO_SEG (PTRC) Protection trip conditioning (w.r.t No Phase
Segregation) IEC 61850-7- 4:2003
PTTR_NO_SEG (PTTR) Thermal overload (w.r.t No Phase Segregation) IEC 61850-7-
4:2003
PTUF_NO_SEG (PTUF) Under frequency (w.r.t No Phase Segregation) IEC 61850-7-
4:2003
PTUV_NO_SEG (PTUV) Undervoltage (w.r.t No Phase Segregation) IEC 61850-7-
4:2003
PTUV_SEG (PTUV) Undervoltage (w.r.t Phase Segregation) IEC 61850-7-
4:2003
RBRF_EXTTRIP (RBRF) Breaker Failure (w.r.t External Tripping) IEC 61850-7-
4:2003
RDRE_BASIC (RDRE) Disturbance Recorder function (w.r.t Mandatory
Attributes only) IEC 61850-7- 4:2003
XCBR_BASIC (XCBR) Circuit Breaker (w.r.t Mandatory Attributes Only) IEC 61850-7-
4:2003

P14DB
-MC-EN-7
MICS
(
MC) 6 MiC
OM 40 Agile P14DB
1.4.1 Logical Node: CILO_INTERLOCK
Description: Control Interlocking
LN Class: CILO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
EnaOpn SPS_WD Enable OPEN Commands
EnaCls SPS_WD Enable CLOSE Commands
1.4.2 Logical Node: GGIO_ALM_96
Description: Generic Process I/O (w.r.t 96 Alarm Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Alm1 SPS_D General single alarm
Alm2 SPS_D General single alarm
Alm3 SPS_D General single alarm
Alm4 SPS_D General single alarm
Alm5 SPS_D General single alarm
Alm6 SPS_D General single alarm
Alm7 SPS_D General single alarm
Alm8 SPS_D General single alarm
Alm9 SPS_D General single alarm
Alm10 SPS_D General single alarm
Alm11 SPS_D General single alarm
Alm12 SPS_D General single alarm
Alm13 SPS_D General single alarm
Alm14 SPS_D General single alarm
Alm15 SPS_D General single alarm
Alm16 SPS_D General single alarm
Alm17 SPS_D General single alarm
Alm18 SPS_D General single alarm
Alm19 SPS_D General single alarm
Alm20 SPS_D General single alarm
Alm21 SPS_D General single alarm
Alm22 SPS_D General single alarm
Alm23 SPS_D General single alarm
Alm24 SPS_D General single alarm
Alm25 SPS_D General single alarm
Alm26 SPS_D General single alarm

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
7
Attribute
Attr. Type
Explanation
T
X
Alm27 SPS_D General single alarm
Alm28 SPS_D General single alarm
Alm29 SPS_D General single alarm
Alm30 SPS_D General single alarm
Alm31 SPS_D General single alarm
Alm32 SPS_D General single alarm
Alm33 SPS_D General single alarm
Alm34 SPS_D General single alarm
Alm35 SPS_D General single alarm
Alm36 SPS_D General single alarm
Alm37 SPS_D General single alarm
Alm38 SPS_D General single alarm
Alm39 SPS_D General single alarm
Alm40 SPS_D General single alarm
Alm41 SPS_D General single alarm
Alm42 SPS_D General single alarm
Alm43 SPS_D General single alarm
Alm44 SPS_D General single alarm
Alm45 SPS_D General single alarm
Alm46 SPS_D General single alarm
Alm47 SPS_D General single alarm
Alm48 SPS_D General single alarm
Alm49 SPS_D General single alarm
Alm50 SPS_D General single alarm
Alm51 SPS_D General single alarm
Alm52 SPS_D General single alarm
Alm53 SPS_D General single alarm
Alm54 SPS_D General single alarm
Alm55 SPS_D General single alarm
Alm56 SPS_D General single alarm
Alm57 SPS_D General single alarm
Alm58 SPS_D General single alarm
Alm59 SPS_D General single alarm
Alm60 SPS_D General single alarm
Alm61 SPS_D General single alarm
Alm62 SPS_D General single alarm
Alm63 SPS_D General single alarm
Alm64 SPS_D General single alarm
Alm65 SPS_D General single alarm
Alm66 SPS_D General single alarm
Alm67 SPS_D General single alarm
Alm68 SPS_D General single alarm
Alm69 SPS_D General single alarm
Alm70 SPS_D General single alarm
Alm71 SPS_D General single alarm

P14DB
-MC-EN-7
MICS
(
MC) 8 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
Alm72 SPS_D General single alarm
Alm73 SPS_D General single alarm
Alm74 SPS_D General single alarm
Alm75 SPS_D General single alarm
Alm76 SPS_D General single alarm
Alm77 SPS_D General single alarm
Alm78 SPS_D General single alarm
Alm79 SPS_D General single alarm
Alm80 SPS_D General single alarm
Alm81 SPS_D General single alarm
Alm82 SPS_D General single alarm
Alm83 SPS_D General single alarm
Alm84 SPS_D General single alarm
Alm85 SPS_D General single alarm
Alm86 SPS_D General single alarm
Alm87 SPS_D General single alarm
Alm88 SPS_D General single alarm
Alm89 SPS_D General single alarm
Alm90 SPS_D General single alarm
Alm91 SPS_D General single alarm
Alm92 SPS_D General single alarm
Alm93 SPS_D General single alarm
Alm94 SPS_D General single alarm
Alm95 SPS_D General single alarm
Alm96 SPS_D General single alarm
1.4.3 Logical Node: GGIO_IND_11
Description: Generic Process I/O (w.r.t 11 Indication Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication(binary input)
Ind2 SPS_D General indication(binary input)
Ind3 SPS_D General indication(binary input)
Ind4 SPS_D General indication(binary input)
Ind5 SPS_D General indication(binary input)
Ind6 SPS_D General indication(binary input)
Ind7 SPS_D General indication(binary input)
Ind8 SPS_D General indication(binary input)
Ind9 SPS_D General indication(binary input)
Ind10 SPS_D General indication(binary input)
Ind11 SPS_D General indication(binary input)

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
9
1.4.4 Logical Node: GGIO_IND_3
Description: Generic Process I/O (w.r.t 3 Indication Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General Indication (Binary input)
Ind2 SPS_D General Indication (Binary input)
Ind3 SPS_D General Indication (Binary input)
1.4.5 Logical Node: GGIO_IND_32
Description: Generic Process I/O (w.r.t 32 Indication Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)
Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)
Ind19 SPS_D General indication (binary input)
Ind20 SPS_D General indication (binary input)
Ind21 SPS_D General indication (binary input)
Ind22 SPS_D General indication (binary input)
Ind23 SPS_D General indication (binary input)
Ind24 SPS_D General indication (binary input)
Ind25 SPS_D General indication (binary input)

P14DB
-MC-EN-7
MICS
(
MC) 10 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
Ind26 SPS_D General indication (binary input)
Ind27 SPS_D General indication (binary input)
Ind28 SPS_D General indication (binary input)
Ind29 SPS_D General indication (binary input)
Ind30 SPS_D General indication (binary input)
Ind31 SPS_D General indication (binary input)
Ind32 SPS_D General indication (binary input)
1.4.6 Logical Node: GGIO_IND_64
Description: Generic Process I/O (w.r.t 64 Indication Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
Ind9 SPS_D General indication (binary input)
Ind10 SPS_D General indication (binary input)
Ind11 SPS_D General indication (binary input)
Ind12 SPS_D General indication (binary input)
Ind13 SPS_D General indication (binary input)
Ind14 SPS_D General indication (binary input)
Ind15 SPS_D General indication (binary input)
Ind16 SPS_D General indication (binary input)
Ind17 SPS_D General indication (binary input)
Ind18 SPS_D General indication (binary input)
Ind19 SPS_D General indication (binary input)
Ind20 SPS_D General indication (binary input)
Ind21 SPS_D General indication (binary input)
Ind22 SPS_D General indication (binary input)
Ind23 SPS_D General indication (binary input)
Ind24 SPS_D General indication (binary input)
Ind25 SPS_D General indication (binary input)
Ind26 SPS_D General indication (binary input)
Ind27 SPS_D General indication (binary input)
Ind28 SPS_D General indication (binary input)
Ind29 SPS_D General indication (binary input)

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
11
Attribute
Attr. Type
Explanation
T
X
Ind30 SPS_D General indication (binary input)
Ind31 SPS_D General indication (binary input)
Ind32 SPS_D General indication (binary input)
Ind33 SPS_D General indication (binary input)
Ind34 SPS_D General indication (binary input)
Ind35 SPS_D General indication (binary input)
Ind36 SPS_D General indication (binary input)
Ind37 SPS_D General indication (binary input)
Ind38 SPS_D General indication (binary input)
Ind39 SPS_D General indication (binary input)
Ind40 SPS_D General indication (binary input)
Ind41 SPS_D General indication (binary input)
Ind42 SPS_D General indication (binary input)
Ind43 SPS_D General indication (binary input)
Ind44 SPS_D General indication (binary input)
Ind45 SPS_D General indication (binary input)
Ind46 SPS_D General indication (binary input)
Ind47 SPS_D General indication (binary input)
Ind48 SPS_D General indication (binary input)
Ind49 SPS_D General indication (binary input)
Ind50 SPS_D General indication (binary input)
Ind51 SPS_D General indication (binary input)
Ind52 SPS_D General indication (binary input)
Ind53 SPS_D General indication (binary input)
Ind54 SPS_D General indication (binary input)
Ind55 SPS_D General indication (binary input)
Ind56 SPS_D General indication (binary input)
Ind57 SPS_D General indication (binary input)
Ind58 SPS_D General indication (binary input)
Ind59 SPS_D General indication (binary input)
Ind60 SPS_D General indication (binary input)
Ind61 SPS_D General indication (binary input)
Ind62 SPS_D General indication (binary input)
Ind63 SPS_D General indication (binary input)
Ind64 SPS_D General indication (binary input)
1.4.7 Logical Node: GGIO_IND_64_CTRL
Description: Generic process I/O (w.r.t 64 Indications Ctrl i/p)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
SPCSO1 SPC_CONTROL_NS Single point controllable status output

P14DB
-MC-EN-7
MICS
(
MC) 12 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
SPCSO2 SPC_CONTROL_NS Single point controllable status output
SPCSO3 SPC_CONTROL_NS Single point controllable status output
SPCSO4 SPC_CONTROL_NS Single point controllable status output
SPCSO5 SPC_CONTROL_NS Single point controllable status output
SPCSO6 SPC_CONTROL_NS Single point controllable status output
SPCSO7 SPC_CONTROL_NS Single point controllable status output
SPCSO8 SPC_CONTROL_NS Single point controllable status output
SPCSO9 SPC_CONTROL_NS Single point controllable status output
SPCSO10 SPC_CONTROL_NS Single point controllable status output
SPCSO11 SPC_CONTROL_NS Single point controllable status output
SPCSO12 SPC_CONTROL_NS Single point controllable status output
SPCSO13 SPC_CONTROL_NS Single point controllable status output
SPCSO14 SPC_CONTROL_NS Single point controllable status output
SPCSO15 SPC_CONTROL_NS Single point controllable status output
SPCSO16 SPC_CONTROL_NS Single point controllable status output
SPCSO17 SPC_CONTROL_NS Single point controllable status output
SPCSO18 SPC_CONTROL_NS Single point controllable status output
SPCSO19 SPC_CONTROL_NS Single point controllable status output
SPCSO20 SPC_CONTROL_NS Single point controllable status output
SPCSO21 SPC_CONTROL_NS Single point controllable status output
SPCSO22 SPC_CONTROL_NS Single point controllable status output
SPCSO23 SPC_CONTROL_NS Single point controllable status output
SPCSO24 SPC_CONTROL_NS Single point controllable status output
SPCSO25 SPC_CONTROL_NS Single point controllable status output
SPCSO26 SPC_CONTROL_NS Single point controllable status output
SPCSO27 SPC_CONTROL_NS Single point controllable status output
SPCSO28 SPC_CONTROL_NS Single point controllable status output
SPCSO29 SPC_CONTROL_NS Single point controllable status output
SPCSO30 SPC_CONTROL_NS Single point controllable status output
SPCSO31 SPC_CONTROL_NS Single point controllable status output
SPCSO32 SPC_CONTROL_NS Single point controllable status output
SPCSO33 SPC_CONTROL_NS Single point controllable status output
SPCSO34 SPC_CONTROL_NS Single point controllable status output
SPCSO35 SPC_CONTROL_NS Single point controllable status output
SPCSO36 SPC_CONTROL_NS Single point controllable status output
SPCSO37 SPC_CONTROL_NS Single point controllable status output
SPCSO38 SPC_CONTROL_NS Single point controllable status output
SPCSO39 SPC_CONTROL_NS Single point controllable status output
SPCSO40 SPC_CONTROL_NS Single point controllable status output
SPCSO41 SPC_CONTROL_NS Single point controllable status output
SPCSO42 SPC_CONTROL_NS Single point controllable status output
SPCSO43 SPC_CONTROL_NS Single point controllable status output
SPCSO44 SPC_CONTROL_NS Single point controllable status output
SPCSO45 SPC_CONTROL_NS Single point controllable status output
SPCSO46 SPC_CONTROL_NS Single point controllable status output

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
13
Attribute
Attr. Type
Explanation
T
X
SPCSO47 SPC_CONTROL_NS Single point controllable status output
SPCSO48 SPC_CONTROL_NS Single point controllable status output
SPCSO49 SPC_CONTROL_NS Single point controllable status output
SPCSO50 SPC_CONTROL_NS Single point controllable status output
SPCSO51 SPC_CONTROL_NS Single point controllable status output
SPCSO52 SPC_CONTROL_NS Single point controllable status output
SPCSO53 SPC_CONTROL_NS Single point controllable status output
SPCSO54 SPC_CONTROL_NS Single point controllable status output
SPCSO55 SPC_CONTROL_NS Single point controllable status output
SPCSO56 SPC_CONTROL_NS Single point controllable status output
SPCSO57 SPC_CONTROL_NS Single point controllable status output
SPCSO58 SPC_CONTROL_NS Single point controllable status output
SPCSO59 SPC_CONTROL_NS Single point controllable status output
SPCSO60 SPC_CONTROL_NS Single point controllable status output
SPCSO61 SPC_CONTROL_NS Single point controllable status output
SPCSO62 SPC_CONTROL_NS Single point controllable status output
SPCSO63 SPC_CONTROL_NS Single point controllable status output
SPCSO64 SPC_CONTROL_NS Single point controllable status output
1.4.8 Logical Node: GGIO_IND_8
Description: Generic Process I/O (w.r.t 8 Indication Elements)
LN Class: GGIO
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Ind1 SPS_D General indication (binary input)
Ind2 SPS_D General indication (binary input)
Ind3 SPS_D General indication (binary input)
Ind4 SPS_D General indication (binary input)
Ind5 SPS_D General indication (binary input)
Ind6 SPS_D General indication (binary input)
Ind7 SPS_D General indication (binary input)
Ind8 SPS_D General indication (binary input)
1.4.9 Logical Node: LLN0_PROT
Description: Protection Domain Logical Node 0
LN Class: LLN0
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate
OcpMod INC_CTRL_PRV_NS Overcurrent Mode X

P14DB
-MC-EN-7
MICS
(
MC) 14 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
OcpBeh INS_BEH_D_PRIV Overcurrent Behaviour X
NgcMod INC_CTRL_PRV_NS Negative Sequence Mode X
NgcBeh INS_BEH_D_PRIV Negative Sequence Behaviour X
EfmMod INC_CTRL_PRV_NS Earth Fault 1 (Measured) Mode X
EfmBeh INS_BEH_D_PRIV Earth Fault 1 (Measured) Behaviour X
EfdMod INC_CTRL_PRV_NS Earth Fault 2 (Derived) Mode X
EfdBeh INS_BEH_D_PRIV Earth Fault 2 (Derived) Behaviour X
SenMod INC_CTRL_PRV_NS SEF/REF Mode X
SenBeh INS_BEH_D_PRIV SEF/REF Behaviour X
VtpMod INC_CTRL_PRV_NS Overvoltage/Undervoltage Mode X
VtpBeh INS_BEH_D_PRIV Overvoltage/Undervoltage Behaviour X
NvdMod INC_CTRL_PRV_NS Residual Overvoltage NVD Mode X
NvdBeh INS_BEH_D_PRIV Residual Overvoltage NVD Behaviour X
NgvMod INC_CTRL_PRV_NS Negative Sequence Overvoltage Mode X
NgvBeh INS_BEH_D_PRIV Negative Sequence Overvoltage Behaviour X
ThmMod INC_CTRL_PRV_NS Thermal Overload Mode X
ThmBeh INS_BEH_D_PRIV Thermal Overload Behaviour X
CbfMod INC_CTRL_PRV_NS CB Fail Mode X
CbfBeh INS_BEH_D_PRIV CB Fail Behaviour X
1.4.10 Logical Node: LLN0_STANDARD
Description: General Logical Node 0
LN Class: LLN0
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate
1.4.11 Logical Node: LLN0_SYSTEM
Description: System Logical Node 0
LN Class: LLN0
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LLN0 Name Plate
LEDRs SPC_CONTROL_NS LED reset T
OrdRun SPS_WD_PRIV Indicate IED is operating a control object X
SyncSt SPS_WD_PRIV Indicate time synchronisation in the IED is active/inactive X

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
15
1.4.12 Logical Node: LPHD_STANDARD
Description: Px40 Physical Device Information
LN Class: LPHD
Attribute
Attr. Type
Explanation
T
X
PhyNam DPL_STANDARD Physical device name plate
PhyHealth INS_HEALTH Physical device health
Proxy SPS_D Indicates if this LN is a proxy
PwrUp SPS_D Power up detected
1.4.13 Logical Node: MMTR_PRIV
Description: Metering
LN Class: MMTR
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
TotWh BCR_PRIV Net real energy since last reset
TotVArh BCR_PRIV Net reactive energy since last reset
SupWh BCR_PRIV Real energy supply (Energy flow towards bus bar)
SupVArh BCR_PRIV Reactive energy supply (Energy flow towards bus bar)
DmdWh BCR_PRIV Real energy demand (Energy flow from bus bar)
DmdVArh BCR_PRIV Reactive energy demand (Energy flow from bus bar)
MTRRs SPC_CTRL_PRV_NS Reset Energy Meters X
1.4.14 Logical Node: MMXU_FOURIER_P145
Description: Standard measurements (w.r.t Fourier Values - P145)
LN Class: MMXU
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
TotW MV_FLOAT Total active power (Total P)
TotVAr MV_FLOAT Total reactive power (Total Q)
TotVA MV_FLOAT Total apparent power (Total S)
TotPF MV_FLOAT Average power factor (Total PF)
Hz MV_FLOAT Frequency
PPV DEL_SEG_ANG Phase to Phase voltages
PhV WYE_SEG_RES_D Phase to Ground voltages
A1 WYE_SEG_RES_D Phase currents (Fourier Magnitudes)
A2 WYE_RES_ANG_D Phase currents (IN Measured)
A3 WYE_RES_ANG_D Phase currents (ISEF Magnitude)
W WYE_SEG Phase active power (P)
VAr WYE_SEG Phase reactive power (Q)

P14DB
-MC-EN-7
MICS
(
MC) 16 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
VA WYE_SEG Phase apparent power (S)
PF WYE_SEG Phase power factor
1.4.15 Logical Node: MMXU_RMS_P145
Description: Standard measurements (w.r.t RMS Values - P145)
LN Class: MMXU
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
PhV WYE_SEG_D Phase to Ground voltages
A WYE_SEG_D Phase currents
1.4.16 Logical Node: MSQI_ALL
Description: Sequence and imbalance (w.r.t Pos, Neq, Zero)
LN Class: MSQI
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
SeqA SEQ_MAG_ANG Positive, Negative and Zero sequence current
SeqV SEQ_MAG_ANG Positive, Negative and Zero sequence voltage
ImbNgA MV_FLOAT Imbalance negative sequence current
1.4.17 Logical Node: MSTA_I_W_VAR
Description: Metering Statistics (w.r.t Current, Real + Reactive Power - Average + Max
values)
LN Class: MSTA
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
AvAmps1 MV_FLOAT_D Average current
AvAmps2 MV_FLOAT_D Average current
AvAmps3 MV_FLOAT_D Average current
AvAmps4 MV_FLOAT_D Average current
AvAmps5 MV_FLOAT_D Average current
AvAmps6 MV_FLOAT_D Average current
MaxAmps1 MV_FLOAT_D Maximum current
MaxAmps2 MV_FLOAT_D Maximum current
MaxAmps3 MV_FLOAT_D Maximum current
AvW1 MV_FLOAT_D Average real power

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
17
Attribute
Attr. Type
Explanation
T
X
AvW2 MV_FLOAT_D
Average real power
AvW3 MV_FLOAT_D
Average real power
AvW4 MV_FLOAT_D
Average real power
MaxW1 MV_FLOAT_D
Maximum real power
MaxW2 MV_FLOAT_D
Maximum real power
MaxW3 MV_FLOAT_D
Maximum real power
AvVAr1 MV_FLOAT_D
Average reactive power
AvVAr2 MV_FLOAT_D
Average reactive power
AvVAr3 MV_FLOAT_D
Average reactive power
AvVAr4 MV_FLOAT_D
Average reactive power
MaxVAr1 MV_FLOAT_D
Maximum reactive power
MaxVAr2 MV_FLOAT_D
Maximum reactive power
MaxVAr3 MV_FLOAT_D
Maximum reactive power
1.4.18 Logical Node: MSTA_V
Description: Metering Statistics (w.r.t Average Voltage) No Current
LN Class: MSTA
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
AvVolts1 MV_FLOAT_D Average voltage
AvVolts2 MV_FLOAT_D Average voltage
AvVolts3 MV_FLOAT_D Average voltage
AvVolts4 MV_FLOAT_D Average voltage
AvVolts5 MV_FLOAT_D Average voltage
AvVolts6 MV_FLOAT_D Average voltage
1.4.19 Logical Node: PFRC_NO_SEG
Description: Rate of change of frequency (w.r.t No Phase Segregation)
LN Class: PFRC
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T
1.4.20 Logical Node: PTOC_NEU
Description: Timed Overcurrent (w.r.t Neutral)
LN Class: PTOC
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode

P14DB
-MC-EN-7
MICS
(
MC) 18 MiC
OM 40 Agile P14DB
Attribute
Attr. Type
Explanation
T
X
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NEU Start
Op ACT_NEU Operate T
1.4.21 Logical Node: PTOC_NO_SEG
Description: Timed Overcurrent (w.r.t No Phase Segregation)
LN Class: PTOC
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T
1.4.22 Logical Node: PTOC_SEG
Description: Timed Overcurrent (w.r.t Phase Segregation)
LN Class: PTOC
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_SEG Start
Op ACT_SEG Operate T
1.4.23 Logical Node: PTOF_NO_SEG
Description: Over frequency (w.r.t No Phase Segregation)
LN Class: PTOF
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Str ACD_NO_SEG Start
Op ACT_NO_SEG Operate T
1.4.24 Logical Node: PTOV_NEU
Description: Overvoltage (w.r.t Neutral)
LN Class: PTOV
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour