American DJ SS-DMX/MATRIX User manual

OPERATION MANUAL
TECHNICAL SPECIFICATIONS
INTRODUCTION:
This model is a features advanced strobe controller, has a variety of functions, including AUDIO
/CHASE operating mode, 7 strobe control mode and chasing program, adjustable dimming level
adjustable flash speed and memory backup.
POWER REQUIREMENTS......................................................................... AC 9~12V, 500mA min.
DMX OUTPUT .............................................................................. 3 Pin plastic XLR female socket
EXT. AUDIO INPUT.....................................................................................................100mV-1Vpp
AC ADAPTOR(included).......................................................................................................... 1 pc
DIMENSIONS........................................................................................................... 482x88x32mm
WEIGHT................................................................................................................................. 1.2 Kg
CONTROLS & FUNCTIONS
FRONT PANEL
AUDIO
SENSITIVITY
AUDIOCHASE
SPEED
DIMMER
PROGRAM
UP DOWN FULL-ON STAND BY
DISPLAY
MIN MAX
PROGRAM
POWER FUNCTION MODE MIC
1 2 3 4 56 7 8 9
10 11 12 13 14
This button is used to pause DMX signals output.
9. STAND BY button
brightness.
Press this button once, the strobe controlled will flash with the maximum speed and maximum
8. FULL ON button
Press this button to decrease the appropriate value, which is indicated in DISPLAY screen.
7. DOWN key
Press this button to increase the appropriate value, which is indicated in DISPLAY screen.
6. UP key
These indicators light when corresponding program is executed.
5. PROGRAM indicators(1-16)
This control adjusts the audio sensitivity of music rhythms detected by the built-in microphone.
4. AUDIO SENSITIVITY control
chasing programs.
This button used with UP and DOWN key controls the flash speed, dimming level and
3. MODE selector
indicators.
Press to select operating mode. Each pressing allows operating mode to change between
AUDIO and CHASE mode, which is indicated by the corresponding AUDIO or CHASE
2. FUNCTION mode selector
1. POWER switch
24-004-0272

15. LOAD type selector
This selector is effective only before the power is turned on. Switch it to left, it is used to
control S-1500/DMX, Mega Strobe/DMX and S-150/DMX; switch it to right, it is used to
control Snap Shot/DMX.
16. AUDIO selector
Set it to INT. position, music signals are from built-in microphone; set it to EXT. position,
music signals are from external line input.
17. EXT. AUDIO INPUT
External line input music signals, 100mV-1Vp-p.
18. POWER INPUT
The power requirements of AC 9~12V, min 500mA is available using recommended
adaptor(included).
19. DMX OUTPUT
3 Pin plastic panel mounting socket, use to connect to DMX INPUT on the strobe.
REAR PANEL
1: GND
2: DATA-
3: DATA+
DMX OUTPUT
AC INPUT
AC 9V~12V
MIN 500MA
EXT
AUDIO INPUT
AUDIO SELECT
INT. EXT.
15 16 17 18
19
12
3
WARNING
1. DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
2. NO USER SERVICABLE PARTS INSIDE.
3. IF IT IS NECESSARY TO RETURN YOUR UNIT FOR SERVICING, PLEASE CONTACT YOUR
LOCAL AUTHORIZED DEALER.
10. AUDIO indicator
This indicator lights when this unit is in AUDIO mode.
11. CHASE indicator
This indicator lights when this unit is in CHASE mode.
12. MODE indicators(3 indicators)
These indicators light when corresponding mode is executed.
13. Built-in microphone
Use to detect music signals.
14. DISPLAY screen
This screen displays the digits from 00-99 which imply corresponding
indications specified as follows:
PROGRAM---------------01-au
DIMMER------------------01-99(maximum dimmer)
SPEED--------------------01-99(maximum speed)
FUNCTION
POWER
SW.
STAND
BY.
SELECT
DISPLAY CHANNEL
01 2CH
02 4CH
03 6CH
04 8CH
05 12CH
06 3x3
07 4x4
UP
DOWN
S-150/DMX
Mega Strobe/DMX
S-1500/DMX
Snap Shot /DMX