American DJ Super Strobe MKII User manual

SPECIFICATIONS: MODEL - Super Strobe MKII
Weight: 7lbs.
Size: 8” x 8.5” x 10.5”
Lamp: ZB-100
Fuse: 3A
Supply Voltage:120V
Working Position: Any Safe position
Duty Cycle: Not to exceed 5minutes on,
allow 5 minutes for cooling.
Super Strobe MKII ™
American DJ ®User Instructions
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 900 58
CAUTION! Read instructions before installing or plugging unit in.
Congratulations on your purchase of this high quality American DJ® product. For your
convenience the Super Strobe MKII has been lamped and is ready to be used. Please
read the following instructions before installing or using your new Super Strobe MKII.
Thank you for purchasing the Super Strobe MKII by American DJ®.
Operating Instructions:
1. The strobe is equipped with a speed dial located on the rear of the unit for local speed adjustment.
2. The Super Strobe MKII is equipped with an optional remote facility input and output for syncing strobes when
using the optional remote controllers S-10A or S-4A. There are two 1/4” mono jacks on the rear of the super
Strobe MKII.
CAUTION:
Always unplug unit before any attempt to service. To replace lamp, remove the front plastic cover by lessening
the front screws on the plastic cover and remove lamp. There are no serviceable parts inside. Do not take the
metal housing apart. Strobes retain High Voltage inside. If you require further technical assistance, contact your
local American DJ dealer.
High Power Professional Strobe Light