American Dynamics AD2032 User manual

FEATURES
The AD2096 Series Alarm Interface Unit
converts sixty-four hardwire alarm inputs to
AD alarm contact numbers for use by American
Dynamics Matrix Switcher/Controller systems.
The matrix switcher/controller systems can be
programmed to automatically switch video
inputs to video outputs, display presets, and
activate auxiliary outputs in response to
activated alarm inputs. A single Form C relay
and LED indicate when any of the sixty-four
alarm contacts are activated. DIP switches are
used to select alarm input groups (in blocks of
sixty-four), to set acceptance of normally-open
or normally-closed alarms (in groups of eight),
and to set the baud rate of the RS-232 link.
Multiple units can be cascaded on a single
RS-232 system port. The universal mount
enables the unit to be mounted to the front or
rear of equipment racks, or flat on a wall or
horizontal surface.
The AD2032 Series Alarm Responder provides
thirty-two addressable double pole Form A
relays arranged in two groups of sixteen. The
Alarm Responder provides relay contact
closures for corresponding video outputs that
are displaying alarm actions. Each relay group
can be programmed to respond to two separate
groups of sixteen contiguous video outputs.
Relays can activate VCRs, annunciators, or
other external alarm associated devices. The
unit is used with MegaPower™ Series Matrix
Switcher/Controller Systems via High Speed
Data Line or AD Manchester code line. The
universal mount enables the unit to be
mounted to the front or rear of equipment
racks, or flat on a wall or horizontal surface.
AD2096 and
AD2032 Series
ALARM ACCESSORIES
AD2096 Series
Alarm Interface Unit
•Input of 64 hard-wired
alarms
•Multiple units cascadable
on a single RS-232 link
•Enables the system to
automatically respond to
external inputs
•Diagnostic LEDs
•Alarm presence indication
•Provides single relay output
•Universal wall, surface, or
rack mount
AD2032 Series
Alarm Responder
•Activates relays that
correspond to video
outputs in alarm
•32 addressable Form-A
relays
•Relays can activate VCRs,
annunciators, or other
external alarm devices
•Diagnostic LEDs
•Universal wall, surface, or
rack mount
www.americandynamics.net

SPECIFICATIONS
Model Numbers
AD2096A . . . . . . . . . . . . . . . . . . . . .Alarm Interface Unit,120 VAC, 50/60 Hz
AD2096-1 . . . . . . . . . . . . . . . . . . . .Alarm Interface Unit, 230 VAC, 50/60 Hz
AD2032 . . . . . . . . . . . . . . . . . . . . . .Alarm Responder, 120 VAC, 50/60 Hz
AD2032-1 . . . . . . . . . . . . . . . . . . . .Alarm Responder, 230 VAC, 50/60 Hz
Operational (Alarm Interface Unit)
Alarm Inputs . . . . . . . . . . . . . . . . .64 contact closures (closures to ground or
0 V to 5 V logic levels), N/O or N/C,
Programmable in blocks of 8
Address Range . . . . . . . . . . . . . . . .16 blocks of 64 for maximum of 1024
Alarm Outputs . . . . . . . . . . . . . . .RS-232 RJ-45 direct connection to system
CPU
Alarm Indication . . . . . . . . . . . . . .LED, and Form-C relay outputs
LEDs . . . . . . . . . . . . . . . . . . . . . . . . .Power and alarm
Operational (Alarm Responder)
Alarm Outputs . . . . . . . . . . . . . . .32 Form-A relays, 2 groups of 16 outputs
Address Range . . . . . . . . . . . . . . . .Blocks of 16
LEDs . . . . . . . . . . . . . . . . . . . . . . . . .Power and data
Matrix Switcher . . . . . . . . . . . . . . .AD High Speed Data Line or Manchester
code connection
Connectors (Alarm Interface Unit)
RS-232 . . . . . . . . . . . . . . . . . . . . . . .RJ-45 in/out, cascadable
Alarm Inputs . . . . . . . . . . . . . . . . .Eleven 12-pin removable screw terminals
Connectors (Alarm Responder)
AD High Speed Data Line . . . . .BNC, in/out
AD Manchester Code . . . . . . . . . .One 12-pin removable screw terminal
Alarm Output . . . . . . . . . . . . . . . .Eight 12-pin removable screw terminals
Electrical
Supply Voltage
AD2096A, AD2032 . . . . . . . . .120 VAC, 50/60 Hz
AD2096-1, AD2032-1 . . . . . . .230 VAC, 50/60 Hz
Power . . . . . . . . . . . . . . . . . . . . . . . .8 watts (nominal)
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . .Universal wall, surface, and rack mount
(19-inch EIA)
Dimensions (H x W x D) . . . . . . .89 x 483 x 203 mm
(3.5 x 19 x 8 in)
Unit Weight . . . . . . . . . . . . . . . . . .4.5 kg (10 lbs)
Shipping Weight . . . . . . . . . . . . . .4.5 kg (10 lbs)
Environmental
Operating Temperature . . . . . . . .0° to 40° C (32° to 104° F)
Storage Temperature . . . . . . . . . .-40° to 70° C (-40° to 155° F)
Humidity . . . . . . . . . . . . . . . . . . . . .98% RH (non-condensing)
Regulatory
Immunity . . . . . . . . . . . . . . . . . . . .EN50130-4
Safety . . . . . . . . . . . . . . . . . . . . . . . .UL2044
Compatible Matrix Switcher/Controller
Systems
MegaPower 1024 Series
MegaPower 168 Series
MegaPower 48 Series
AD2150 Series
Basic System Diagram
AMERICAN DYNAMICS AD2096 AND AD2032 SERIES ALARM ACCESSORIES
VS289-02 01/03 L
©2003 Sensormatic Electronics Corporation
Product specifications and availability subject to change without notice.
Certain product names mentioned herein may be trade names and/or
registered trademarks of other companies.
ENTER AUXILIARY
IRIS
FOCUS
ZOOM
CAMERAMONITORSTATUS PRESET
AD2096 Series
Matrix Switcher/Controller
VCR
DVR
AD2032 Series
RS-232 Lines
High Speed Data Line
or
Control Code Line
Monitor Displaying Alarm Camera
AD2088 Operator Keyboard
Alarm Contact Activated By Open Door