American Standard Colony Oval Whirlpool and Bathing Pool... User manual

COLONY OVAL 6’™
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
COLONY OVAL 6’WHIRLPOOL & BATHING
POOL
❏1742.018 Whirlpool featuring System I:
•Acrylic with fiberglass reinforcement
•Molded-in backrest
•Dual, molded in arm rests
•1.0 HP single speed, self-draining
pump / motor
•Factory installed power cord with plug
•Six multi-directional and flow-adjustable jets
•Side-mounted air switch On / Off
•Two air volume controls
•Factory installed and tested whirlpool system
❏1742.018C Stay Clean™Whirlpool Massage
Featuring System I:
•Same as above except with the
StayClean™whirlpool system featuring
Antimicrobial AlphaSan®
❏1742.002 Bathing Pool only
Nominal Dimensions: 71”x 41”x 23-7/8"
(1805 x 1040 x 606mm)
© 2004 American Standard Inc. BV-31A
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
02/04
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ANSI Z124.1 for Plastic Bathtubs
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
To Be Specified - Required:
❏Color:
To Be Specified - Optional:
❏Bath Drain: 1583.470*
❏Bath Filler: *
* See you American Standard Distributor
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.

COLONY OVAL 6’™
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
© 2004 American Standard Inc.
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH SUMP BY BEDDING. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY
OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
■
1803 mm
(71)
ROUGH
FLOOR
1-1/2 O.D.
TAILPIECE
▲OUTLINE OF
CUTOUT-USE
TEMPLATE
292 mm
(11-1/2)
1041 mm
(41)
555mm
(21-7/8)
82mm
(3-1/4)
51mm
(2)
535mm
(21)
98mm
(3-7/8) C
LOF DRAIN
OUTLET
605mm
(23-7/8 )
1-1/2 N.P.T.M.
THREADS 35mm
(1-3/8)
305mm(12) X 229 mm(9)
CUTOUT IN FLOOR FOR DRAIN
98mm
(3-7/8)
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
ON/OFF
SWITCH
PUMP MAY
EXTEND
TO THE RIM
SEE FTTG.SPECS
FOR DIMENSION
C
LOF SUPPLIES
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
OPTIONAL
102mm
(4)
305mm
(12)
(2) AIR VALVES
BATH
SUPPORT
MATERIAL
1803 mm
(71)
ROUGH
FLOOR
1-1/2 O.D.
TAILPIECE
▲OUTLINE OF
CUTOUT-USE
TEMPLATE
292 mm
(11-1/2)
1041 mm
(41)
555mm
(21-7/8)
82mm
(3-1/4)
51mm
(2)
535mm
(21)
98mm
(3-7/8) C
LOF DRAIN
OUTLET
605mm
(23-7/8 )
1-1/2 N.P.T.M.
THREADS 35mm
(1-3/8)
305mm(12) X 229 mm(9)
CUTOUT IN FLOOR FOR DRAIN
98mm
(3-7/8)
SEE FTTG.SPECS
FOR DIMENSION
C
LOF SUPPLIES
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
OPTIONAL
102mm
(4)
305mm
(12)
(2) AIR VALVES
BATH
SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 1742 WHIRLPOOL
71 x 41 x 23-7/8 In.(1805 x 1040 x 606mm)
119 Lbs. (54 Kg.)
680 Lbs. (308 Kg.)
67 Gal. (254 L)
50 Gal. (190 L)
49 x 26 In. (1245 x 660mm)
62 x 34 In. (1588 x 864mm)
16-7/8 In. (429mm)
32 Lbs./Sq.Ft. (157 Kgs./Sq.m)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.1 HP, 9.9 AMPS, 120V.PUMP
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
GENERAL SPECIFICATIONS FOR 1742 BATHING POOL
71 x 41 x 23-7/8 In.
(1805 x 1040 x 606mm)
99 Lbs. (45 Kg.)
680 Lbs. (308 Kg.)
67 Gal. (254 L)
49 X 26 In. (1245 x 660mm)
62 x 34 In. (1588 x 864mm)
16-7/8 In. (429mm)
32 Lbs./Sq.Ft. (157 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)