American Standard Savona Oval Whirlpool and Bathing Pool... User manual

H37
© 2008 AS America Inc.
SAVONA OVAL™
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
To Be Specied - Required:
❏ Color: (specify color)
❏ Bath Faucet: (specify nish)
❏ Rotary Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish)
for Body Massage Jets only
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SAVONA OVAL™ WHIRLPOOL
❏ 2903.018WC Whirlpool
• Acrylic with berglass reinforcement
• EverClean® System
• Pre-leveled tub bottom
• Dual, molded-in arm rests
• 1.6 HP, single speed, self-draining pump/motor
• Factory installed power cord and plug
• Eight multi-directional and ow-adjustable
jets including:
- Two foot jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏ 2903.002 Bathtub only
Nominal Dimensions:
1524 x 1073 x 540mm
(60" x 42-1/4" x 21-1/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS

H38
© 2008 AS America Inc.
SAVONA OVAL™
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
1524mm
(60)
ROUGH
FLOOR
1-1/2 O.D.
TAILPIECE
OUTLINE OF
CUTOUT - USE
TEMPLATE
241 mm
(9-1/2)
1073mm
(42-1/4)
489mm
(19-1/4)
INTEGRAL
FEET
SUPPORT
95mm
(3-3/4)
51mm
(2)
537mm
(21-1/8)
76mm
(3)
C
LOF DRAIN
OUTLET
540mm
(21-1/4 )
1-1/2 N.P.T.M.
THREADS 35mm
(1-3/8)
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
98mm
(3-7/8)
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
ON/OFF
SWITCH
PUMP
(MAY
EXTEND
BEYOND
RIM BY 1-1/2")
SEE FTTG.SPECS
FOR DIMENSION
C
LOF SUPPLIES
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
OPTIONAL
102mm
(4)
305mm
(12)
SAFE-T-HEATER
REMOVABLE
BLANK
1524mm
(60)
ROUGH
FLOOR
1-1/2 O.D.
TAILPIECE
OUTLINE OF
CUTOUT - USE
TEMPLATE
241 mm
(9-1/2)
1073mm
(42-1/4)
489mm
(19-1/4)
INTEGRAL
FEET
SUPPORT
95mm
(3-3/4)
51mm
(2)
537mm
(21-1/8)
76mm
(3)
C
LOF DRAIN
OUTLET
540mm
(21-1/4 )
1-1/2 N.P.T.M.
THREADS 35mm
(1-3/8)
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
98mm
(3-7/8)
SEE FTTG.SPECS
FOR DIMENSION
C
LOF SUPPLIES
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
OPTIONAL
102mm
(4)
305mm
(12)
GENERAL SPECIFICATIONS FOR 2903 WHIRLPOOL
60 x 42-1/4 x 21-1/4 In.(1524 x 1073 x 540mm)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
53 x 32 In. (1346 x 813mm)
15 In. (381mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
27.8
45.4
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.6 HP, 9.7 AMPS, 120V.SYSTEM I PUMP
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
GENERAL SPECIFICATIONS FOR 2903 BATHING POOL
60 x 42-1/4 x 21-1/4 In.
(1524 x 1073 x 540mm)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
45 x 23 In. (1143 x 584mm)
53 x 32 In. (1346 x 813mm)
15 In. (381mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
27.8
45.4
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
▲ CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
OPTIONAL TILING BEAD KIT AVAILABLE.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF (152mm) 6 ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certied. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.