American Standard Retrospect Collection 8711.000.002 User manual

I23
© 2008 AS America Inc. Revised 2/08
RETROSPECT COLLECTION®
CONSOLE TABLE
FIRE CLAY/METAL
RETROSPECT COLLECTION®CONSOLE TABLE
• Classically styled metal console table
• Retrospect Collection pedestal top with faucet
holes on 8" (203mm) centers
• Console table legs feature classic styling with
integral front and side towel bars and a lower clear
tempered-glass shelf for storage. Available in
Chrome or Satin nish.
• Right Height™ for greater comfort during use
• Part of design matched Retrospect Collection®
Separate Components:
❏ 0282.008 Console/Pedestal top
8" (203mm) centers
❏ 8711.000.002 Console table legs (Chrome)
❏ 8711.000.295 Console table legs (Satin)
Nominal Dimensions with Sink:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
❏ Color:
❏ Pedestal Top: White only
❏ Console Table Legs: 002 Chrome or 295 Satin
❏ Recommended Faucet: 2373.701
❏ Faucet Finish: 002 Chrome or 295 Satin
❏ Supplies:
❏ 1-1/4" Trap: 752683-495
❏ P Trap Finish:
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
▼ ANCHOR SCREWS FOR LAVATORY AND PEDESTAL NOT INCLUDED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
*
*
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
FINISHED
FLOOR
FINISHED
WALL
3/8" (10mm) DIA.
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTERS
36"
(914mm)
7-1/4"
(184mm)
8-1/8" TO
BOTTOM OF
DRAIN OUTLET
(206mm)
24"
(610mm)
22"
22"
(559mm)
(559mm)
1-1/4" O.D.
TAILPIECE
8"
(203mm)
FINISHED WALL
9"
(229mm)
19-3/4"
(502mm)
27"
(686mm)
8"
(203mm)
13-3/4"
(349mm)
3-3/8"
(86mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
3 Holes
1-3/8" (35mm) Dia.
15"
(381mm)
7-1/2"
(191mm)
11"
(279mm)