American Standard Standard Collection Console Table... User manual

I26
© 2008 AS America Inc.
Standard Collection®
CONSOLE TABLE
FIRE CLAY/METAL
Standard Collection® CONSOLE TABLE
• Classically-styled Standard Collection® oval
pedestal top with Standard console table legs
• Console table legs feature classic styling with
integral towel bars with ceramic knob ends
and a clear glass shelf for storage. Available in
Chrome or Satin nish.
• Right Height™ for greater comfort during use
• Design matched to Standard Collection® toilet
• Console/pedestal top with faucet holes on 8"
(203mm) centers
• Recommended design-matched 8" spread faucet
#2881 available in chrome or satin nish
Separate Components:
❏ 0283.008 Console/Pedestal top
8" (203mm) centers
❏ 8710.000.002 Console table legs (Chrome)
❏ 8710.000.295 Console table legs (Satin)
Nominal Dimensions:
32" x 20" x 36"
(813 x 508 x 914mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
❏ Color:
❏ Pedestal Top: 020 White or 222 Linen
❏ Console Table Legs: 002 Chrome or 295 Satin
❏ Recommended Faucet: 8" spread No. 2881
❏ Faucet Finish: Chrome or Satin
❏ Supplies:
❏ 1-1/4" Trap:
32"
(813mm)
26-5/8 "
(676mm)
FINISHED WALL
FINISHED WALL
17 "
(432mm)
8-1/2"
(216mm)
9-1/2 "
(241mm)
20"
(508mm)
36"
(914mm)
10-1/4"
(260mm)
FINISHED
FLOOR
3-7/8"
(98mm)
3/4"
(19mm)
13
(330mm)
* 24"
(610mm)
* 22"
(559mm)
SUPPLIES
1-1/4" O.D.
WASTE
1-1/4" O.D.
TAILPIECE
8"
(203mm)
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P”
TRAP ARE SUGGESTED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.