American Standard TENDENCE 2086.101X User manual

C11
© 2006 American Standard Inc.
TENDENCE
SINGLE CONTROL LAVATORY FAUCET
GENERAL DESCRIPTION:
Cast brass body. Metal lever handle. Multiport washerless
ceramic disc valve cartridge provides steady water flow even
in low water pressure situations. Equipped with a hot limit
safety stop. 3/8" O.D. copper supplies. Fitting can be
mounted on 4" centers using optional brass escutcheon or
by single hole mounting method. 2.2 gpm/8.3L/min.
maximum flow rate.
PRODUCT FEATURES:
Brass and Copper Waterway: Highest quality faucet
materials for durability & long life.
Multiport Ceramic Disc Valve Cartridge: Assures
smooth, precise control and a lifetime of drip-free
performance.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Wide Comfort Zone: Gives more sensitive temperature
control.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Choice of Finishes: Available in Polished Chrome or
Satin Nickel (PVD).
MODEL NUMBER:
2086.101X Single Control Lavatory
Pop-up drain.
SUGGESTED SPECIFICATION:
Single control lavatory faucet shall feature a cast brass body, with Metal Lever handle. Shall also feature a Multiport
washerless ceramic disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Fitting shall be American
Standard Model # 2086.101X.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number Description
Tendence single control lavatory faucet. Pop-up drain.
Finish Options*
PVD
Satin
Nickel
295
Polished
Chrome
002
2086.101X
Escutcheon plate only.
2077.101P
365.5mm
(14-3/8)
REF. 3/8 O.D.
SUPPLIES
60mm
(2-3/8)
DIA.
32mm
(1-1/4)DIA.
MOUNTING
HOLE
34.5
(1-3/8)MAX.
61.5mm
(2-1/2)
168.5mm
(6-5/8)
130mm
(5-1/8)
108mm
(4-1/4)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
*EverClean™ Finish:
• Offered on Polished Chrome (002) and Satin Nickel (295) finish.
• One wipe effortlessly removes spots.
• Eliminates the need for cleaners and scrubbing.

C12
© 2006 American Standard Inc.
TENDENCE
SINGLE CONTROL LAVATORY FAUCET
GENERAL DESCRIPTION:
Cast brass body. Metal lever handle. Multiport washerless
ceramic disc valve cartridge provides steady water flow even
in low water pressure situations. Equipped with a hot limit
safety stop. 3/8" O.D. copper supplies. Fitting can be
mounted on 4" centers using optional brass escutcheon or
by single hole mounting method. 2.2 gpm/8.3L/min.
maximum flow rate.
PRODUCT FEATURES:
Brass and Copper Waterway: Highest quality faucet
materials for durability & long life.
Multiport Ceramic Disc Valve Cartridge: Assures
smooth, precise control and a lifetime of drip-free
performance.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Wide Comfort Zone: Gives more sensitive temperature
control.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Choice of Finishes: Available in Polished Chrome or
Satin Nickel (PVD).
MODEL NUMBER:
2086.101X Single Control Lavatory
Pop-up drain.
SUGGESTED SPECIFICATION:
Single control lavatory faucet shall feature a cast brass body, with Metal Lever handle. Shall also feature a Multiport
washerless ceramic disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Fitting shall be American
Standard Model # 2086.101X.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number Description
Tendence single control lavatory faucet. Pop-up drain.
Finish Options*
PVD
Satin
Nickel
295
Polished
Chrome
002
2086.101X
Escutcheon plate only.
2077.101P
365.5mm
(14-3/8)
REF. 3/8 O.D.
SUPPLIES
60mm
(2-3/8)
DIA.
32mm
(1-1/4)DIA.
MOUNTING
HOLE
34.5
(1-3/8)MAX.
61.5mm
(2-1/2)
168.5mm
(6-5/8)
130mm
(5-1/8)
108mm
(4-1/4)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
*EverClean™ Finish:
• Offered on Polished Chrome (002) and Satin Nickel (295) finish.
• One wipe effortlessly removes spots.
• Eliminates the need for cleaners and scrubbing.