American Standard Afwall Flowise 3351.128 User manual

M69
© 2008 AS America Inc.
AFWALL™ FloWise® ELONGATED
1.28 GPF FLUSHOMETER TOILET
AFWALL™ FloWise® ELONGATED TOILET
• Wall-mounted ushometer valve toilet
• Vitreous china
• Meets denition for HET (High Efciency Toilet)
• High Efciency (4.8 Lpf/1.28 gpf)
• EverClean® surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Condensation channel
• Elongated bowl
• Powerful direct-fed siphon jet action
• 1-1/2" inlet spud
• Fully-glazed 2-1/8" trapway
• 10" x 12" water surface area
• 100% factory ush tested
❏ 3351.128 Elongated bowl only, top spud
❏ 3352.128 Elongated bowl only, top spud with
slotted rim for bedpan holding (White only)
❏ 3353.128 Elongated bowl only, back spud
❏ 3354.128 Elongated bowl only, back spud with
slotted rim for bedpan holding (White only)
Component Parts:
❏ 047007-0070A Inlet Spud (furnished with bowl)
Nominal Dimensions:
660 x 356 x 381mm
(26" x 14" x 15")
Recommended working pressure–between
25 psi at valve when ushing and 80 psi static
Fixture only, less seat, bolt caps, and
ushometer valve
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat:
❏ American Standard #5901.100 Heavy duty open
front less cover
❏ American Standard #5905.100 Extra heavy duty
open front less cover
❏ Flushometer Valve:
❏ American Standard Selectronic™ #6065.121.002
DC Power (Top Spud)
❏ American Standard Selectronic™ #6065.222.007
DC Power (Concealed Back Spud)
❏ American Standard Selectronic™ #6067.222.007
AC Power (Concealed Back Spud)
❏ American Standard Selectronic™ #6068.222.007
Multi AC Power (Concealed Back Spud)
Revised 11/08
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES - CHECK LOCAL CODES.
When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.
BARRIER FREE

M70
© 2008 AS America Inc.
NOTES:
● Toilet designed to meet ADA accessibility standards when top of seat height set at
432 to 483mm (17" to 19") from nished oor.
PRODUCT 3351.128 AND 3353.128 SHOWN, 3352.128 AND 3354.128 SAME AS EXCEPT
WITH SLOTTED RIM FOR BED PAN HOLDING.
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING
NOT RECOMMENDED).
SUGGESTED 2mm (1/16) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON
THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR
SUPPLY ROUGHING.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY.
CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for
use of superseded or voided pages
FINISHED WALL
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm(5-1/2) CENTERS
660mm
(26)
133mm
(5-1/4)
191mm
(7-1/2)
(4) 22mm (7/8)
DIA. HOLES
356mm
(14)
C/L OF
OUTLET
FINISHED
FLOOR
32mm
(1-1/4)
381mm
(15)
330mm
(13)
(3/4)
19mm
133mm
(5-1/4)
95mm
(3-3/4)
C/L
229mm
(9)
89mm
(3-1/2)
76mm(3) DIA. HOLE IN WALL
FOR 1-1/2 SPUD
70mm
(2-3/4)
283mm
(11-1/8)
330mm
(13)
FINISHED WALL
470mm
(18-1/2)
C/L OF SEAT POST
HOLES 140 mm
(5-1/2) CENTER
660mm
(26)
73mm
(2-7/8)
133mm
(5-1/4)
191mm
(7-1/2)
292mm
(11-1/2)
(4) 22mm
(7/8)
HOLES
356mm
(14)
C/L OF
OUTLET
121mm
(4-3/4)
FINISHED
FLOOR
32mm
(1-1/4)
381mm
(15)
1" N.P.T. OR C.W.T. SUPPLY
AS REQUIRED TO FLUSH VALVE
330mm
(13)
19mm
(3/4)
133mm
(5-1/4)
95mm
(3-3/4)
70mm
(2-3/4)
1-1/2 SPUD
C/L
229mm
(9)
3351.128/3352.128
3353.128/3354.128
AFWALL™ FloWise® ELONGATED
1.28 GPF FLUSHOMETER TOILET
Revised 11/08
BARRIER FREE