American Standard Cadet 5023.100 Operating and safety instructions

K6
© 2008 AS America Inc.
CADET™ BIDET
VITREOUS CHINA
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Bidet Fitting*:
❏ Fitting Finish:
❏ Trap:
❏ Supplies with Stops:
* See faucet section for additional models available
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE
SUGGESTED.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST
BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER VALVE
FEATURE.
PROVISIONS MUST BE MADE FOR THE INSTALLATION OF TRAP IN
FLOOR.
● REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BIDET
AND FITTING FOR ADDITIONAL INFORMATION.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided leaet.
654mm
(25-3/4)
368mm
(14-1/2)
FINISHED
FLOOR
203mm
(8)
FINISHED
WALL
64mm
(2-1/2)
C/L (2) 13mm (1/2) DIA. HOLES
ON 191mm (7-1/2) CENTERS
1-1/4 O.D. TAILPIECE
SUPPLIES
AS REQ'D
229mm
(9)
COUPLING NUT
ON FITTING
133mm
(5-1/4)
102mm
(4)
102mm
(4) 381 mm
(15)
121mm
(4-3/4)
159mm
(6-1/4)
64mm
(2-1/2)
MIN.
64mm
(2-1/2)
MIN.
C/L HOT & COLD SUPPLY INLETS
C/L OF OUTLET
C/L OF SPRAY
127mm
(5)
108mm
(4-1/4)
VACUUM
BREAKER
●
●
*
CADET™ BIDET
❑ 5023.100 For deck-mounted tting
• Vitreous china
• Flushing rim and vertical cleansing spray
• Integral overow
• Two bolt caps
Shown with 7391.723 Hampton Bidet Fitting
with metal cross handles (not included)
Nominal Dimensions:
654 x 381 x 368mm
(25-3/4" x 15" x 14-1/2")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08