American Standard Ovalyn 0495.221 User manual

J53
BARRIER FREE
© 2008 AS America Inc.
OVALYN™
UNDERCOUNTER SINK
VITREOUS CHINA
Revised 2/08
OVALYN™ UNDERCOUNTER SINK
• Classic oval undermount sink
• Made from vitreous china
• Front overow
• Supplied with mounting kit (047194-0070A)
and template
❏ 0495.221 Unglazed rim
435 x 359mm
(17-1/8" x 14-1/8")
❏ 0495.300 Glazed underside
Bowl size:
382mm (15-1/16") wide
306mm (12-1/16") front to back
140mm (5-1/2") deep
❏ 0496.221 Unglazed rim
489 x 413mm
(19-1/4" x 16-1/4")
❏ 0496.300 Glazed underside
Bowl size:
432mm (17") wide
356mm (14") front to back
140mm (5-1/2") deep
❏ 0497.221 Unglazed rim
546 x 441mm
(21-1/2" x 17-3/8")
❏ 0497.300 Glazed underside
Bowl size:
483mm (19") wide
391mm (15-3/8") front to back
140mm (5-1/2") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
• CAN/CSA B45 series
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available

J54
BARRIER FREE
© 2008 AS America Inc.
38mm
(1-1/2)
ADA DRAIN
OUTLET
ABFINISHED WALL
OR SPLASHBACK
140mm
(5-1/2) REF
51mm(2)
MINIMUM
EDGE OF
COUNTER
TOP
CUTOUT
C/L
382mm
(15-1/16)
SEALING
COMPOUND
*349mm
(13-3/4)
COUNTERTOP
(BY OTHERS)
191mm
(7-1/2)
203mm
(8)
1-1/4 O.D. TAILPIECE
1-1/4
O.D. WASTE
SUPPLIES
AS REQ'D
64mm
(2-1/2)
359mm
(14-1/8)
*286mm
(11-1/4)
13mm
(1/2)
FINISHED FLOOR
864mm
(34)
686mm
(27)
MIN.
864mm
(34)
51mm
(2)
306mm
(12-1/16)
435mm
(17-1/8)
610mm
(24)
BARRIER FREE
CLEARANCE
152mm
(6)
MAX.
229mm
(9)
MIN.
203mm
(8)
MIN.
FURNITURE
INTERIOR
SURFACE
MINIMUM
INTERIOR
CLEARANCE
454mm
(17-7/8)
FITTING
CENTERSET
SPREAD
A
1-1/4 (32mm)
1-3/8 (35mm)
B
4 (102mm)
8 (203mm)
DETAIL OF MOUNTING CLIP
(KIT No. 047194-0070A)
SINK
BRASS INSERT
19mm(3/4)
MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
CAT. NO.
0496.221
E
489mm
(19-1/4)
546mm
(21-1/2)
F
413mm
(16-1/4)
441mm
(17-3/8)
G H
0497.221
FITTING
CENTERSET
SPREAD
A
1-1/4 (32mm)
1-3/8 (35mm)
B
4 (102mm)
8 (203mm)
D
182mm
(7-3/16)
191mm
J
16mm
(5/8)
19mm
(7-1/2) (3/4)
K
500mm
(19-11/16)
534mm
(21-1/16)
C
103mm
(4-1/16)
95mm
(3-3/4)
432mm
(17)
483mm
(19)
356mm
(14)
391mm
(15-3/8)
38mm
(1-1/2)
ADA DRAIN
OUTLET
ABFINISHED WALL
OR SPLASHBACK
C
51mm(2)
MINIMUM
EDGE OF
COUNTER
TOP
CUTOUT
C/L
G
SEALING
COMPOUND
*349mm
(13-3/4)
COUNTERTOP
(BY OTHERS)
D
203mm
(8)
1-1/4 O.D. TAILPIECE
1-1/4
O.D. WASTE
SUPPLIES
AS REQ'D
DETAIL OF MOUNTING CLIP
(KIT No. 047194-0070A)
SINK
BRASS INSERT
19mm(3/4)
MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
13mm
(1/2)
29mm
(1-1/8)
64mm
(2-1/2)
F
-2mm(1/16)
*286mm
(11-1/4)
16mm
(5/8)
FINISHED FLOOR
+3mm(1/8)
864mm
(34)
H
E
CABINET
INTERIOR
FACE
MINIMUM
INTERIOR
CLEARANCE
(K)
686mm
(27)
MIN.
864mm
(34)
76mm
(3)
610mm
(24)
BARRIER FREE
CLEARANCE
152mm
(6)
MAX.
229mm
(9)
MIN.
203mm
(8)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
OVALYN™
UNDERCOUNTER SINK
VITREOUS CHINA
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND
USABLE BUILDINGS AND FACILITIES -
CHECK LOCAL CODES.
Countertop 864mm (34") from finished floor. Lavatory
installed 51mm (2") from front edge of countertop.
Countertop thickness to be 25mm (1") maximum.
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND
USEABLE BUILDINGS AND FACILITIES -
CHECK LOCAL CODES.
Countertop 864mm (34") from finished floor. Lavatory
installed 76mm (3") from front edge of countertop.
Countertop thickness to be 25mm (1") maximum.
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P"
TRAP ARE SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
PLEASE NOTE MINIMUM INTERIOR CLEARANCE DIMENSION (K).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.
NOTES:
USE ENCLOSED TEMPLATE FOR COUNTER TOP CUTOUT.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY.
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P"
TRAP ARE SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
PLEASE NOTE MINIMUM INTERIOR CLEARANCE DIMENSION (K).
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages
0496/0497
0495
Revised 2/08