American Standard Advanced Clean 3.0 SpaLet User manual

Advanced Clean 3.0
®
2018
760297-100EN
I - EN53 - FR
How to register the warranty:
PLEASE COMPLETE AMERICAN STANDARD WARRANTY REGISTRATION AND SAVE THIS
WARRANTY INFORMATION.
IMPORTANT: Registration of the SpaLet®must be completed for this warranty to become effective.
Your registration will make it easier to service your product.
INSTRUCTIONS: Register your SpaLet at www.americanstandard.com. Please save your point of
purchase (sale receipt).
IF YOU HAVE ANY QUESTIONS, OR PARTS ARE DAMAGE OR MISSING, DO NOT CONTACT, OR
RETURN, THIS PRODUCT TO THE STORE. CONTACT CUSTOMER SERVICE.
American Standard Brands
One Centennial Avenue
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.americanstandard.com
GCW-1385(19010)
Enregistrer la garantie:
VEUILLEZ REMPLIR L’ENREGISTREMENT DE LA GARANTIE AMERICAN STANDARD ET CONSERVER LES
RENSEIGNEMENTS SUR LA GARANTIE.
IMPORTANT: Ce produit SpaLetMD doit être enregistré pour valider la garantie.
L’enregistrement facilite la réparation du produit, le cas échéant.
INSTRUCTIONS: Enregistrez votre produit SpaLet à l’adresse www.americanstandard.com. Veuillez conserver
votre reçu d’achat (ou reçu de vente).
SI VOUS AVEZ DES QUESTIONS OU SI DES PIÈCES SONT ENDOMMAGÉES OU MANQUANTES, NE RE-
TOURNEZ LE PRODUIT AU MAGASIN ET NE CONTACTEZ PAS LE MAGASIN. COMMUNIQUEZ AVEC LE SER-
VICE À LA CLIENTÈLE.
American Standard Brands
One Centennial Avenue
Piscataway, New Jersey 08854
Attention: Directeur du service à la clientèle
Pour les résidents des États-Unis, il est aussi possible
d’obtenir de l’information au sujet de la garantie par téléphone,
au numéro sans frais suivant: 800-442-1902
www.americanstandard.com

II - EN
TABLE OF CONTENTS
Be Sure to Follow the Important Safeguards
Important Safeguards........................................................................................................... 1
Precautions for Preventing Failure
Handling Precautions .......................................................................................................... 5
Please Read This First
Names of Parts .................................................................................................................... 6
Preparation and Checks Before Use
1. Open the Water shut-off Valve .................................................................................. 7
2. Insert the Power Plug Into the Outlet....................................................................... 7
3. Operate the Spray.................................................................................................... 9
4. Adjust the Temperature ...........................................................................................10
Functions.............................................................................................................................11
Operation
General Operation
1. Automatic Spray of Mist on the Toilet Bowl When a Person Sits on the SpaLet
®
Seat ....13
2. Auto Deodorizing Function......................................................................................13
3. Front and Back Cleansing ......................................................................................15
4 Warm Air Dryer ........................................................................................................17
Useful Functions
Power Save.................................................................................................................18
Comfort Features .......................................................................................................19
52 - FR
GARANTIE LIMITÉE
Ce siège SpaLetMD est couvert par une garantie de trois ans sur toutes les pièces. Si une inspection permet de constater que ce
produit de plomberie American Standard, y compris la porcelaine et les pièces mécaniques, a un défaut de matériel ou de main
d’oeuvre, American Standard le réparera ou, à sa discrétion, échangera le produit contre un modèle identique ou similaire.
Cette garantie limitée est valide uniquement pour le premier acheteur non commercial du produit et son installation.
Une réclamation aux termes de cette garantie doit être accompagnée de la preuve d’achat – conservez les reçus d’achat.
Pour valider cette garantie, l’acheteur doit enregistrer la garantie par Internet ou téléphone, conformément aux instructions
d’enregistrement de la garantie.
Cette garantie ne s’applique pas aux établissements commerciaux. La garantie pour une utilisation commerciale du siège SpaLet
est de deux ans.
Cette garantie ne s’applique pas à la conformité des codes du bâtiment locaux. Étant donné que les codes du bâtiment varient
beaucoup d’une région à l’autre, il incombe à l’acheteur du produit de s’informer des codes du bâtiment auprès d’un entrepreneur
ou plombier local.
Cette garantie est annulée si le produit: a été déplacé de son premier emplacement d’installation; a fait l’objet d’un mauvais
entretien, d’un accident, de dommages, ou d’une utilisation abusive ou inadéquate; n’a pas été installé selon les instructions
d’American Standard; ou s’il a été modifié par rapport au produit fourni par American Standard. La garantie est annulée si le produit
fait défaut en raison d’une pièce usée comme la garniture, les fusibles et les piles.
AVERTISSEMENT: Cette garantie NE COUVRE PAS les dommages causés par les produits nettoyants puissants. Ces produits
peuvent endommager les composantes de l’appareil. Cela peut entraîner une fuite et endommager votre propriété. American
Standard n’est pas responsable des dommages causés par l’utilisation de nettoyant installé dans la cuvette.
Le choix d’American Standard de réparer ou de remplacer le produit aux termes de cette garantie ne couvre pas la main-d’oeuvre
ni les coûts de retrait et d’installation, y compris les coûts des matériaux à proximité comme les carreaux ou le marbre. American
Standard n’est pas responsable des autres dommages accessoires et indirects associés à une défaillance du produit. (Certains
États ou certaines provinces interdisent l’exclusion ou la limitation des garanties implicites. Par conséquent, cette exclusion ne
s’applique peut-être pas à vous.)
Cette garantie vous donne des droits. Vous avez peut-être d’autres droits accordés par la loi, selon votre État ou province, et cette
garantie n’affecte pas vos droits accordés par la loi.
Enregistrer la garantie
VEUILLEZ REMPLIR L’ENREGISTREMENT DE LA GARANTIE AMERICAN STANDARD ET CONSERVER LES RENSEIGNE-
MENTS SUR LA GARANTIE.
IMPORTANT: Ce produit SpaLet doit être enregistré pour valider la garantie.
L’enregistrement facilite la réparation du produit, le cas échéant.
INSTRUCTIONS Enregistrez votre produit SpaLet à l’adresse www.americanstandard.com. Veuillez conserver votre
reçu d’achat (ou reçu de vente).
SI VOUS AVEZ DES QUESTIONS OU SI DES PIÈCES SONT ENDOMMAGÉES OU MANQUANTES, NE RETOURNEZ PAS LE
PRODUIT AU MAGASIN ET NE CONTACTEZ PAS LE MAGASIN. COMMUNIQUEZ AVEC LE SERVICE À LA CLIENTÈLE.
American Standard Brands
One Centennial Avenue
Piscataway, New Jersey 08854
Attention: Directeur du service à la clientèle
Pour les résidents des États-Unis, il vous est aussi possible
d’obtenir de l’information au sujet de la garantie par téléphone,
au numéro sans frais suivant: 800-442-1902
www.americanstandard.com

III - EN
Useful Information
Other References............................................................................................................... 21
If You Have These Problems............................................................................................... 22
If the Water in the Tank is Frozen ....................................................................................... 23
Preparing the SpaLet®Seat if not using for a long time ..................................................... 25
Cleaning and Maintenance
Cleaning and Maintenance ................................................................................................ 27
Cleaning SpaLet®Seats and Lids ...................................................................................... 29
Removing and Cleaning Seat Lids..................................................................................... 30
Cleaning Nozzle Areas....................................................................................................... 34
Replacing Nozzle Tips........................................................................................................ 37
Dealing with Weak Deodorizing Effect ............................................................................... 39
Dealing with Weak Nozzle Spray ....................................................................................... 40
Flashing Battery Level Indicator on the Remote Control .................................................... 41
Disassembling Product and Installing It at Another Location Such as When Moving......... 42
Troubleshooting
Troubleshooting.................................................................................................................. 43
Specications
Specifications..................................................................................................................... 50
TABLE OF CONTENTS

1 - EN
BE SURE TO FOLLOW THE IMPORTANT SAFEGUARDS
Failure to follow the IMPORTANT SAFEGUARDS may
result in serious accidents in some circumstances.
Each of these items are extremely important for safety
and should be strictly observed.
In the event that an accident occurs as a result of
improper usage, American standard will assume no
responsibility for damages.
This product is assumed to be used by persons, such as
elderly persons, persons with limited mobility or illness
and children.
This product usage includes direct contact with the skin.
To ensure proper usage of this product, please read the
manual carefully before using it.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
When using the product - especially in the presence of
children - you should always observe the following safety
instructions.
Cannot be held liable for damages that are the result of
disregarding these instructions.
In order to illustrate varying degrees of severity, the
following terms are used:
DANGER Denotes an immediately hazardous
situation, which may result in death or
severe injury if not prevented.
WARNING Denotes a potentially hazardous situation,
which may result in death or severe injury
if not prevented.
CAUTION
Denotes a potentially hazardous situation,
that may result in mild to moderate injuries
and/or damages to the product and/or other
items and property if not prevented.
DANGER
Risk of electric shock (risk of death!):
Improper connection of the power plug or socket
can result in a risk of electric shock.
Do not install this product
in a wet or damp location,
such as inside a shower
room or steam room, as
this may lead to electric
shock or re.
Do not pour water or cleaning agents into or onto
the back housing where electronics are stored. It
could cause electric shock or res.
Do not use while bathing.
Do not place or store product where it can fall or
be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for a product that has fallen into
water. Unplug immediately.
WARNING
Risk of burns, electric shock, res and/
or personal injury:
The device must be disconnected from the
power supply for any and all installation and
maintenance work and for repairs.
This also applies in the event that you nd
damages on the power supply line or on the
product itself.
Please ensure this by
– setting the fuses (Breakers) of the electrical
installation into the off position or
– by completely removing the screw-in
fuses of the electrical installation or
– by completely pulling the power plug
(if any) out of the wall socket.
When doing so, do not pull on the cord, but pull
on the power plug instead.
Do not connect or disconnect the power plug
with wet hands, as this may cause electric
shock.
Hold the power plug when connecting or
disconnecting it. If you hold the cord, the plug
or cord may be damaged, resulting in electric
shock or re.
Disconnect the power plug periodically and
clean it with a dry cloth, as dust accumulated on
the power plug may cause re
This product should only be connected to
AC120V. Do not connect additional power
cords to the SpaLet®seat’s electrical outlet, as
this may result in re.
Completely insert the power plug into the
electrical outlet, as failure to do so may cause
electric shock or re.
Do not use a loose outlet, as this may cause
electric shock or re.
Connect this product to a properly grounded
outlet only. See Grounding Instructions.

2 - EN
BE SURE TO FOLLOW THE IMPORTANT SAFEGUARDS
GROUNDING INSTRUCTIONS:
This product should be grounded in the event of
an electrical short circuit, grounding reduces the
risk of electric shock by providing an
escape wire for the electric current. This
product is equipped with a cord having a
grounding wire with a grounding plug. The
plug must be pugged into an outlet that is
properly installed and grounded.
GROUNDED
OUTLET
GROUNDING
DANGER
Improper use of the grounding plug can
result in a risk of electric shock.
If repair or replacement of the cord or plug is
necessary, do not connect the grounding wire to
either at blade terminal. The wire with insula-
tion having an outer surface that is green with or
without yellow stripes is the grounding wire.
This product is factory equipped with a specic
electric cord and plug to permit connection to a
proper electric circuit. Make sure that the prod-
uct is connected to an outlet having the same
conguration as the plug. No adapter should
be used with this product. Do not modify the
plug provided-if it will not t the outlet, have the
proper outlet installed by a qualied electrician.
If the product must be reconnected for use on a
different type of electric circuit, the reconnection
should be made by qualied service personnel.
Never use while sleeping or drowsy.
WARNING
Risk of burns, electric shock, res and/or
personal injury:
If the SpaLet®seat is used for a long period
of time without setting the seat temperature to
“OFF”, the user may suffer a low-temperature
burn. These precautions should especially be
observed when any of the following use the
SpaLet seat.
– Children
– Elderly persons
– Persons with an illness
– Persons with sensitive skin
– Persons on medication that may cause
drowsiness
– Persons who are under the inuence
of alcohol
– Persons who are suffering from exhaustion
Check the temperature settings of the water and
the dryer air before each use. Set the air dryer
temperature to the lowest level if you intend to
use this feature for a prolonged period of time.
There is a risk of burns, if this feature is used for
a prolonged period of time at high temperature
settings. This applies particularly to the following
people: children, the elderly, ill persons, persons
with sensitive skin and those under the inuence
of alcohol and overly tired people.
Do not use outdoors and do not operate in a
space where aerosol spray is used or
concentrated oxygen is being administered.
It may cause a malfunction or loss of glossiness.
Make sure that no items or foreign objects
obstruct any openings (air outlets, hoses, etc.).
Remove any obstructions immediately to
prevent possible hazards and damages.
Observe the following instructions if you are using
batteries.
– Make sure to use the right poles (+ /-)
when inserting the batteries.
– Remove the batteries from the remote
control if you won’t use the SpaLet seat for an
extended period of time.
– Do not leave expired batteries inside the remote
control, as they can corrode which could cause
damages to your health or the remote control.
– Batteries do not belong in the household waste!
Discard batteries in compliance with your local
regulations. Battery leakage may cause re.
– Keep batteries away from children.
Batteries are not toys. Contact a physician
immediately in the event of a battery being
swallowed accidentally.
– If your skin comes into contact with the
liquid inside a battery, rinse immediately with
copious amounts of water.
– If spilled battery uid comes into contact with
the eyes, immediately rinse with clean water
without rubbing. The liquid can cause
blindness. Talk to a doctor.

3 - EN
BE SURE TO FOLLOW THE IMPORTANT SAFEGUARDS
Be mindful of the following when handling
batteries:
– Do not store batteries carelessly together with
other metal objects (necklaces, hair pins etc.).
– Please do not mix new and old batteries, but
remove both batteries at the same time as they
will discharge otherwise. Only use batteries of
the same type.
– Do not recharge batteries, short them, open or
damage them by force and do not bring them
into contact with re, water or high tempera-
tures. They could otherwise explode or leak
and thereby cause damages.
Do not try to open or repair the SpaLet®seat on
your own. Do not make modications or install
additional items. The SpaLet seat contains ener-
gized power lines. Upon being opened, there is a
risk to your life! Repairs must only be performed
with original replacement parts and accessories
by certied electrician. Improper installation and
maintenance work or repairs can create substan-
tial hazards to the user.
Do not use near electronics and medical equip-
ment with a weak signal. There is a danger that
electrical malfunction may cause an accident.
Use this product only for its intended use as de-
scribed in the manual. Do not use attachments
not recommended by the manufacturer.
If water leaks from the SpaLet seat or the water
supply line, disconnect the SpaLet seat from the
power supply and close the water cutout valve.
There is a risk of electric shock, re and ooding.
If there is any indication of damages to the
SpaLet seat, disconnect immediately from the
power supply and contact the customer service.
This product should only be connected to a
potable water supply line. Failure to do so will
cause problems in the operation.
Keep the power supply cord away from heated
surfaces. (e.g. surface radiators)
If there is a possibility of water freezing in the
SpaLet seat, be sure to employ the "Preparing
the SpaLet seat unit if not using for a long time
procedure. Damage due to freezing may cause
re or ooding.
CAUTION
Risk of minor injuries and property
damage:
For care of the plastic parts,
use a mild detergent. There
is a danger of electric shock,
re and/or injury due to
damage to the plastic parts.
Do not use chlorine-based
detergent, acidic detergent, or
disinfectant for cleaning the
ceramic parts. It may cause
malfunction and damage due to
the vaporized gas.
Make sure that the clamp ring is
placed rmly onto the water
supply hose. There is a risk of
water spilling if the hose slips
from the untightened clip.
Do not supply with water other than potable
water. It may cause electric shock, re and skin
inammation due corrosion of electronic parts
inside the seat unit.
Do not stand on the lid or lean on
the SpaLet seat. There is a risk of
injury and damages to the device.
Keep ame sources away from the product.
There is a risk of re damage.
If you identify damage on the SpaLet seat, do
not touch or plug in the SpaLet seat, do not
touch these areas as there is a risk of personal
injury.
Contact Customer Service.

4 - EN
BE SURE TO FOLLOW THE IMPORTANT SAFEGUARDS
Do not supply the SpaLet®seat with a hot water,
or do not expose the SpaLet seat to any impact.
There is a risk of injury from damaged parts.
There is a danger of damage or water leakage
Regularly inspect the device for visible damages.
Damages on the device can pose a risk to your
safety. Never switch on a damaged device.
If you will not be using this product for a long
time, close the water shut-off valve and drain the
water from the SpaLet seat, and then, turn off
the power at the power breaker or disconnect the
power plug from the outlet. There is a danger of
re or ooding due to freeze damage. There is a
danger of skin inammation due to dirty water.
When the device is used by children, the elderly
or persons with mobility impairments you must
ensure that they won’t fall off. There is a risk of
injury and damages to the device.
The on-site electrical installation and connecting
the device to the power mains must only be
performed by authorized and qualied
electricians, who are well versed in the locally
applicable regulations and supplemental
requirements and know the requirements of the
local utility providers extensively.
Improper installation and maintenance work or
repairs can create substantial hazards to the
user, for which we cannot be held liable.
Do not apply impact to the
clip ring or pull it when
cleaning the SpaLet seat, as
the clip ring may break and
the water supply hose may
come off, resulting in ood-
ing.
Turn off the power at the power breaker or
disconnect the power plug from the outlet when
cleaning. Failure to do so may cause electric
shock. (Ensure the power is turned on when
using the nozzle cleaning function.)
This product is not intended to be used by
young children, persons with physical and/or
mental disabilities, or persons lacking experi-
ences and knowledge without the supervisions
and instructions of the person responsible for
the safety and understands
possible hazards.
Children shall not play with the product.
Do not bend or crush the water supply hose,
as this may result in water leakage
and ooding.
Note the following when using the strainer. If
foreign materials are attached to the O-ring, it
may cause ooding due to water leakage.
– Close the water shut-off valve when
removing the strainer.
– When installing the strainer, tighten it
fully so there is no gap.
– Check that the O-ring is free from
foreign materials when attaching it.
SAVE THESE INSTRUCTIONS

5 - EN
PRECAUTIONS FOR PREVENTING FAILURE
HANDLING PRECAUTIONS
Do not expose the SpaLet®seat to direct
sunlight. It can cause discoloration of the
plastic parts. Direct sunlight can further-
more lead to the remote control and the
sensor not working properly.
Do not open and close the SpaLet
seat or lid roughly. It may cause
malfunction of auto open/close,
cracking or electrical leakage.
Do not pour water or cleaning
agents onto the remote control.
It could cause it to malfunction.
Never block the air openings of the
product. It may cause malfunction.
Do not use electrical heaters in the
vicinity of the SpaLet seat. It
could cause discoloration of the plastic
parts or re.
Do not operate the remote control with wet hands. It
could cause it to malfunction.

6 - EN
Names of Parts
Overview
Strainer
Seat Unit Indicator Section
< Left side of the seat unit >
Deodorizing Filter
< Right side of seat unit >
* (+Page 39)
Deodorizing lter
mounting opening
Deodorizing lter
< Bottom side of the seat unit >
Deodorizer air inlet
Toilet tank
Water supply pipe or tank
water supply hose
Seat unit water supply hose
Water shut-off valve
Power plug
Junction tting
Large nozzle shutter
Toilet bowl
Nozzle (Front cleansing)
Nozzle (Back cleansing)
SpaLet® seat
Caution label
Seat sensor switch
(built into the seat unit)
Seat lid
Product model nameplate
Seat unit indicator section
(See the enlarged view below.)
Power indicator
Power save indicator
Strainer

7 - EN
Open the Water Shut-off Valve.
* If the water shut-off valve is closed, turn it counterclockwise
to open.
If the valve is already open, its position has been adjusted.
Be sure to set the valve to the original position if you turn it.
STEP
1
Insert the Power Plug
Into the Outlet.
* Conrm that the power LED on the seat unit is lit.
STEP
2
Names of Parts/Preparation and Checks Before Use
Vacuum Breaker
Vacuum breaker
* The vacuum breaker is built into the seat unit.
The vacuum breaker requires periodic inspection.
Mounting Plate and Lock Lever
Mounting plate
Seat unit
Lock leverToilet bowl
* The mounting plate is used to remove
the seat unit from the toilet bowl for cleaning
and maintenance. (+Page 32)
Turn counterclockwise
Water shut-off valve
[CAUTION]
• When disconnecting and reconnecting the power plug,
wait for approximately 10 seconds before reconnecting.
lSeat unit indicator section
Power indicator
Connect the grounding wire
securely to the grounding
terminal of the power outlet.
* Failure to observe this warning
can result in electric shocks.
Grounding
●
● This product should
be connected only to a
120-VAC power source.
●
● Do not use a multi-outlet
socket.
* Failure to observe this warning
may cause a re.
Prohibited
WARNING
Power plug
●Then check that the power LED
lights.
* The power LED on the indicator lights (green).
If the power LED does not light, the main power may have
been turned off. If "OFF" is displayed on the LCD, press
Power button on the remote control.
WARNING

8 - EN
Names of Parts/Preparation and Checks Before Use Preparation and Checks Before Use
(Reference)
• All indicator LEDs will be lit for several seconds when the [Power] button on the remote control unit is turned
ON.
• The OFF indicator LED will be lit for several seconds when the [Power] button on the remote control unit is
turned OFF.
• The indicator LED will be off in several seconds after the button is operated.
Remote Control
Bidet
Dryer
Mild
Water Temp. Power
Cleansing
Deodorizer
Massage
Seat Temp. Power Save
Stop
Nozzle Cleaning
Transmitter TransmitterNozzle Position
Spray Strength

9 - EN
Seat sensor switch
(Built into the seat unit)
Operate the Spray
n
1Roll up your sleeve and set
your arm on the SpaLet®seat.
* The SpaLet seat is equipped with a seat sensor
that detects the presence of someone sitting on
the SpaLet seat.
The Spray and dryer will not function if the sensor
is not triggered.
* Allow the spray to operate for approximately 30
seconds to bleed air in the water line during initial
use.
n
2Press the [Cleansing] button.
* At this time, water will discharge from around the
nozzle as a preliminary operation.
n
3Place a hand above the noz-
zle tip to block the sprayed
water.
n
4Press the [Stop] button to
stop the SpaLet.
Preparation and Checks Before Use
STEP
3

10 - EN
Preparation and Checks Before Use
● Changethetemperature
* Press the corresponding switch to change the dif-
ferent temperatures.
Adjust the Temperature
(Reference)
• The SpaLet seat does not warm immediately. The
seat heater should be turned on 10 to 15 minutes
before use to ensure the desired temperature is
reached for comfortable use.
• This SpaLet seat is equipped with a seat heater
auto off function that automatically turns off the seat
heater when the SpaLet seat is in use to prevent low-
temperature burns. (+ Page 19)
• The maximum seat temperature is 96.8°F for energy-
saving purposes. The seat may feel cool depending
on the usage environment.
Be sure to set the seat temperature
to the "OFF" setting when the SpaL-
et® seat will be used by the following
types of users.
• Children
• Elderly persons
• Persons with illness
• Persons with limited mobility
• Persons with sensitive skin
• Persons who are taking medication that
causes drowsiness
• Persons who are under the inuence
of alcohol
• Persons who are suffering from exhaustion
* Using the SpaLet seat for an extended
period of time without turning off the seat
heater may result in low-temperature
burns.
OBSERVE
WARNING
Seat Temp.
* There are 6 levels of seat temperature available including "Off",
"Low (approximately 82.4°F)", "High (approximately (96.8°F)",
and the other levels between low and high. Select your tem-
perature preference in accordance with the season.
Water Temp.
* There are 6 levels of water temperature available including
"Off", "Low (approximately 89.6 ° F)", "High (approximately
104 ° F)", and the other levels between low and high. Select
your temperature preference in accordance with the season.
Dryer Temp.
* There are 3 levels of drying temperature available including
"Low", "Medium", and "High". (+ Page 17)
STEP
4
About Indicators
All indicator LEDs will be off if the button is left
unoperated for several seconds. If the indicator LEDs
are off while making settings, press the button again.

11 - EN
Functions
The product model number is indicated on the product model nameplate attached on the inner side of the seat lid (+Page 6).
Check the functions provided on your product.
Cleansing Functions
Bowl spray +
13
Sprays mist on the bowl surface to minimize stains.
Nozzle shutter +
39
Store the nozzles when not in use. Removable for easy cleaning.
Nozzle cleaning mode +
35
Ejects the nozzles for easy cleaning.
Nozzle cleaning +
34
Cleans the nozzles when the switch is operated.
Detachable nozzle tips +
37
Nozzle tips can be replaced for added sanitation.
Easy-to-clean seat -
There is no gap at the joints on the SpaLet® seat and the back side is made
of stain-resistant material for easy cleaning.
Body slide attachment +
32
The seat unit can be easily detached for easy cleaning of the areas
facing the toilet bowl.
Front cleansing nozzle -
The front cleansing nozzle is designed for comfortable use by women.
Self cleaning nozzle +
16
Washes the nozzle before and after use.
One-touch seat lid removal +
30
The seat lid can be easily removed for cleaning.
Cleansing Functions
Back Cleansing +
15 - 16
Provides warm spray for back cleansing.
Wide Back Cleansing +
15 - 16
Moves the nozzle back and forth for a wide-area cleansing.
Oscillating spray +
15 - 16
Moves the nozzle back and forth rapidly to provide a pulsating effect.
Back massage cleansing +
16
Alternates the water pressure between two levels to provide a pulsating
effect.
Front Cleansing +
15 - 16
Provides a low-pressure stream of water for gentle cleansing.
Wide Front Cleansing +
15 - 16
Moves the nozzle back and forth to provide a gentle spray over a wide area.
Nozzle position adjustment +
16
Allows the user to move the nozzle to provide a stream of water to a desired
position.
Power Save Function
Advanced power save +
18
Saves energy by automatically lowering the SpaLet seat temperature
when not in use.
One-touch power save +
18
When the switch is operated, the heater turns off for a certain period
of time to conserve energy.
Power switch -Manually operating this switch conserves energy.

12 - EN
Functions
Comfort Functions
Warm air dryer +
17
Provides warm air for quick drying.
Air shield deodorizer +
14
Produces an air current to deodorize the inside of the toilet bowl
thoroughly and powerfully.
Deodorizer-turbo +
14
Provides a powerful deodorizing effect when the switch is operated.
Heated seat +
10
Keeps the SpaLet® seat warm even on a cold day.
Slow-close seat -Convenient Slow-Close features prevents seat from slamming.
Seat heater auto-off +
19
Turns off the SpaLet seat heater when a person sits on the seat. This
prevents low-temperature burns.
Seat sensor +
21
Prevents the product from operating unless a person is sitting on the
SpaLet seat.
Remote control -The remote control is easy to see and allows operation in a
comfortable posture.

13 - EN
Automatic Spray of Mist on the Toilet Bowl When
a Person Sits on the SpaLet®Seat [Bowl Spray]
* This function is set to ON at the factory.
STEP
1
This function sprays mist onto the inside of the toilet bowl to minimize the adhesion of waste on the bowl surface.
* Mist is sprayed for approximately 6 seconds after a person sits on the SpaLet seat.
* If the user stands up and sits on the seat again, mist will not be sprayed for approximately 80 seconds.
* The mist spray area varies depending on the type and shape of the toilet bowl.
Auto Deodorizing Function [Air Shield Deodorizer]
(Reference)
• The automatic deodorizing function can be turned
off. (+Page 19)
n
1
The deodorizing process starts when a user sits down
on the SpaLet seat.
The deodorizer fan activates to clear odor from inside the toilet bowl.
n
2
The deodorizing process stops once a user stands up.
The deodorizer fan stops automatically 1 minute after standing up.
STEP
2
General Operation
■Disablingthebowlsprayfunction
Press and hold the [Nozzle Cleaning] and [Seat
Temp.] buttons simultaneously for at least 2
seconds.
* When the function is set to OFF, a long beep sound is produced.
* To set the function to ON again, press and hold the [Nozzle
Cleaning] and [Seat Temp.] buttons simultaneously for at least 2
seconds.
(When the function is enabled, a beep sound is produced.)
[Nozzle Cleaning] + [Seat Temp.]

14 - EN
Pressing the [Deodorizer] button on the remote control provides a more powerful deodorizing effect than the automatic
deodorizing function.
Setting the automatic deodorizing function to always operate in the Turbo mode
Press and hold the [Stop] and [Deodorizer] buttons simultaneously for
at least 2 seconds.
* When the setting is made, a beep sound is produced.
* When the deodorizing function turns on, it always operates in the Turbo mode.
* To return the setting to OFF, press and hold the [Stop] and [Deodorizer] buttons simultaneously for at least
2 seconds.
(When the setting is set to OFF, a long beep sound is produced.)
n
1
Press the [Deodorizer] button
while the automatic deodorizing
function is in operation.
* When the function turns ON, a beep sound is
produced
* The deodorizing fan operates in the Turbo mode and
removes odor from the inside of the toilet bowl with
higher performance.
n
2
To turn off the Deodorizer-turbo,
press the [Deodorizer] button
again.
* When the function is turned off, a long beep
sound is produced.
* The deodorizing function changes from the Turbo
mode to the normal automatic deodorizing function.
General Operation
[Stop] + [Deodorizer]
[Deodorizer]

15 - EN
Front and Back Cleansing
Back Cleansing - Mild Oscillating Spray Super Oscillating Spray
Front Cleansing Wide Cleansing Oscillating Spray - Super
n
1Press the [Cleansing] button,
[Mild] , or [Bidet] button.
Back Cleansing functions wash any waste still remaining after a bowel movement.
Back Cleansing : Sprays water to wash
Back Cleansing - mild : Sprays water with less pressure for a more gentle wash
Front Cleansing functions wash any waste remaining during menstrual cycles or other circumstances.
Keep cleansing times between 10 to 20 seconds.
n
2Press the [+] or [-] sides of
the Spray Strength button to
adjust the spray strength.
* There are 6 levels of spray strength available.
Start with a low setting and then gradually in-
crease the strength until the desired pressure is
reached.
* To increase pressure: Press the [+] side of the button.
To decrease pressure: Press the [-] side of the button.
n
3Press the [Stop] button to
stop operation.
* This SpaLet®seat is equipped with an auto-stop
function so that back cleansing and back cleansing
- mild operation stops automatically after 2 minutes.
Note that operation can be extended by an additional
2 minutes when other operations are performed while
cleansing operations are ongoing, such as the mas-
sage and oscillating spray functions, for a total of 6
minutes maximum of cleansing before automatically
stopping.
The nozzle spray will
discharge from the nozzle
tip to wash your back
area.
The nozzle will move
back and forth to clean
over a wider range.
The nozzle will move back and forth
rapidly to wash more thoroughly.
Back Cleansing/Back Cleansing - mild
(Press once) Wide Cleansing (Press twice)
* Press 4 times to cycle back to Back
Cleansing/Back Cleansing - mild.
Super oscillating Back Cleansing
(Press three times)
The nozzle spray will discharge
from the nozzle tip to wash the
delicate areas of women.
The nozzle will move
back and forth to clean
over a wider range.
The nozzle will move back and forth
to clean over an even wider range.
Front Cleansing
(Press once) Wide Cleansing (Press twice)
* Press 4 times to cycle back
to Front Cleansing.
Oscillating spray - super
(Press three times)
STEP
3
General Operation

16 - EN
General Operation
n
1 Press the [Massage] button
during back cleansing or
back cleansing - mild operation.
n
2 Press the [ Massage ] button
again to stop the massage op-
eration.
● Pressthe " " or " " sides of the
Nozzle Position button.
* There are 5 nozzle positions available.
* These positions include the default position, two front posi-
tions, and two back positions.
* The position resets to the default position when standing up
from the SpaLet®seat.
* To move the nozzle position forward: " "
To move the nozzle position backward: " "
[CAUTION]
• The nozzle spray may weaken during winter or other
times when the water temperature is signicantly
low.
• Sit further back on the SpaLet seat.
Less water will splash if you sit further back on the seat.
• Back cleansing and back cleansing - mild operation
will stop if the SpaLet seat is ushed during this oper-
ation.
• Do not wash or rinse for extended periods of time.
Do not wash internal parts of the body.
* Doing so may rinse away normally present bacte-
ria and cause an internal imbalance.
• Follow your doctor's instructions on use if you are
receiving treatment or medical care for areas af-
fected by use of this product.
Self-cleaning nozzle
This SpaLet seat is equipped with a self-cleaning
nozzle function that automatically washes the nozzle
before and after cleansing.
Water discharges from a point near the nozzle tip
When sitting on the SpaLet seat or pressing any cleans-
ing button, water discharges from a point near the
nozzle tip in preparation to spray warm water. It may
take some time for the water to warm in cold regions or
during winter.
Water discharges from a point near the nozzle tip im-
mediately after a user sits down on the SpaLet seat
as well as before and after cleansing. This is required
for the function and is not indicative of a failure.
(+Page 22)
Default position
Massage Cleansing
Water pressure varies between a stronger and weaker pressure during back cleansing or back cleansing - mild
operation to provide a pulsating effect during the wash.
* The massage function does not operate during front cleansing operation.
* The pulsating effect will be felt differently by each person.
The nozzle position can be adjusted back and forth during front cleansing, back cleansing and back cleansing
- mild operation
Nozzle Position

17 - EN
Warm Air Dryer
Warm Air Drying
Warm air is blown to dry the area washed by the nozzle spray.
* The front cleansing nozzle extends and pushes the nozzle shutter down
during the warm air drying operation.
Be sure to set the drying tempera-
ture to the "Low" setting when
the SpaLet®seat will be used by
the following types of users.
• Children
• Elderly persons
• Persons with illness
• Persons with limited mobility
• Persons with sensitive skin
• Persons who are taking medication that
causes drowsiness
• Personswhoareundertheinu-
ence of alcohol
• Persons who are suffering from
exhaustion
* Using the dryer for an extended period of
time at some other setting may result in
burns.
OBSERVE
WARNING
(Reference)
• After cleansing, you can dry faster by wiping gen-
tly with toilet paper to remove water drops before
pressing the [Dryer] button.
Warm air drying
This SpaLet seat is equipped with an auto-stop function
so that operation stops automatically after 4 minutes.
● Pressthe[Dryer] button.
* There are three levels of air temperature available.
* The deodorizer function stops temporarily during
the drying operation.
● Pressthe[Stop] button
to stop operation.
STEP
4
Changing Air Temperature
Press the [Dryer] button again while drying.
* Every time the button is pressed, the air temperature and indicator LED will make a level change from
Medium to High, High to Low, and back to Medium again.
* The indicator LED will be off in several seconds.
* When the dryer is stopped, the setting will return to the initial setting.
General Operation
Dryer
Medium
Dryer
High
Dryer
Low