AmeriGlide Infinity Curved Stair Lift User manual

Innity Curved Stair Lift
Pleasereadthisinstallation
guidecarefullytoensure
correctinstallationofyourrail,
carriageandseatoftheInnity
curvedstairlift.
InstallationGuide

The information contained within this manual has been designed for use by AmeriGlide approved engineers who have
received the appropriate product training in the following categories:
1. Product Installation
2.Testing and Commissioning.
lt is also assumed that the person using this manual will have the basic knowledge and skills required in both the
mechanical and electrical aspects to apply consideration and awareness for the safety of themselves and others involving
their work.
The contents of this manual are in the recommended order of placement, which forms the full installation, and
commissioning of this standard model.

Table of Contents
RailPreperationandFixing...............................................................................................................................................................................
RailFixing...................................................................................................................................................................................................
Mounting theCharger.............................................................................................................................................................................
CarriagePreperationandAssembly...............................................................................................................................................................
InstallingtheBatteries.............................................................................................................................................................................
LoadingontoRails....................................................................................................................................................................................
ConnectSeatBase...................................................................................................................................................................................
RunningtheChairOn..............................................................................................................................................................................
InstallRailChargePoints.........................................................................................................................................................................
CalibrateandProgramtheStairLift...............................................................................................................................................................
ProgramtheStairLift...............................................................................................................................................................................
ProgrammingtheBendSlowingFunction...........................................................................................................................................
RemoteControl........................................................................................................................................................................................
TroubleshootingandSafety.............................................................................................................................................................................
ManualOverride......................................................................................................................................................................................
ResettheOSG...........................................................................................................................................................................................
TheDiagnosticDisplay............................................................................................................................................................................
WiringDiagrams..................................................................................................................................................................................................
DemonstrationandHandover.........................................................................................................................................................................
ToolsandEquipment.........................................................................................................................................................................................
3
5
7
8
9
10
11
12
14
15
18
20
21
22
23
24
25
29
30
31

Rail Preperation and Fixing
Remove packaging and protective wrapping from
rail sections.
Position rail sections on staircase as per Installation Drawing.
RAIL PREPERATION AND FIXING
Insert the leg stanchions into the relevant bases
and approximately set the height by tightening the
3 x grub screws on each base. (Do not tighten too
much as these will need to be adjusted later)
Scan to watch!
How to Measure Stairs
Using an iPhone
Need Help?

Thread 2-core cable through lower tube of each
section of rail, working from top to bottom.
Ensure a minimum of 150mm of cable at each end.
RAIL PREPERATION AND FIXING 4

Assemble rail joints together working from bottom
to top of stairs.
Apply grease to male part of joint. Pins should
be ush with stair side of rail.
Fit and tighten joint clamps.
Rail Fixing
RAIL PREPERATION AND FIXING 5
NOTE: Oer top tubes rst.
Using the installation drawing details:
Check top and bottom rail heights over the
corresponding steps.
Check rail angles
Check lower and upper rails are vertically in line.
Adjust leg heights as required.
Ensure rail to wall measurements match the
Installation drawing.
Scan to watch!
Innity Stair Lift
Installation
Need Help?

Secure plates to the staircase by the following method:
Loosen grub screws on leg collar
Fix foot-plate with 3 screws (Figure 4)
Tighten screw to leg.
Repeat for each leg.
The following xings are recommended:
Timber Staircase: 3 x 50mm screws.
Concrete Staircase: 3 x 50mm screws & 3 xrawlplugs.
Other Staircases: Installation requirements must be
assessed during Survey.
WARNING
!
Be aware of
hidden dangers
such as; wiring,
pipework, etc.
Finally ensure all rail dimensions are in
accordance with the rail installation drawing.
Carry out any nal adjustment to the bases as
required using the 3 x Grub Screws then tighten
once the rail position is correct.
RAIL PREPERATION AND FIXING 6

Power Supply
Charging Unit
Power Output Cable
Find a suitable power supply as close as possible to either the top or bottom of the stairs.
Mount the charger in a suitable position near the power supply using the screws supplied. Please ensure the charger
is mounted level and secure.
Leave sucient length on the power output to enable easy connection to the rail charge points.
Do not connect or switch on the power supply until the rail charge points have been connected. (See Page 31)
RAIL PREPERATION AND FIXING 7
Mounting the Charger

Carriage Preperation and Assembly
Unpack all the pre-assembled units from their
packaging, taking care not to place the carriage
on the oor, avoiding damage.
Your carriage will arrive already pre-assembled
as either a manual swivel option or powered
swivel option as per your order.
Carriage and Footrest
Seat and Armrest
CARRIAGE PREP AND ASSEMBLY 8

Fig. 1
Fig. 2
Remove the front panel by unscrewing the
4 main screws.
Once you’re have inserted the batteries consult
g. 2, making sure the battery circuit is correct.
CARRIAGE PREP AND ASSEMBLY 9
Installing the Batteries