Amerihome HCTABLE User manual

HCTABLE
Hand Crank Table
Assembly Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
QUESTIONS? PROBLEMS? CONTACT CUSTOMER SERVICE FIRST.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE
PARTS LIST
(A) TABLE TOP – 1 PIECE (B) TABLE LEGS – 3 PIECES (C) SUPPORT W/ CRANK WHEEL – 1 PIECE
HARDWARE LIST
HEX BOLT – 9 PIECES WRENCH– 1 PIECE WASHERS– 2 PIECES
Use For Leg Assembly (plus 1 Extra) (16mm)

ASSEMBLY INSTRUCTIONS
1) Locate Support (C) and attach one Table Leg (B).2) Attach the second Table Leg (B) using one
Attach one Hex Bolt at top and two Hex Bolt at Hex Bolt at top and two at bottom.
bottom using the Wrench.
3) Attach the third Table Leg using one Hex Bolt 4) Place two Washers on top of crank.
at top and two at bottom.
5) Attach the Table Top (A) by rotating the top.6) Tighten Crank Lock Bolt (which is attached).
201706201706