Ameriwood AX1 9810096COM User manual

B
WARNING
ameriwoodhome.com
Follow Ameriwood Home
Keep this Assembly Manual for future reference
- Anchor unit to stud in wall
- Do Not allow children to climb on unit
- Put heavy items on lower shelves or drawers
- Two people required for assembly
9810096COM
B349810096COM

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy liing.
- Idenfy, sort and count the parts before aempng assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a
R (right) and L (le) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY:1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

Before You Start
Hardware Assembly Method
3
ameriwoodhome.com





This Hardware Assembly Method will be used throughout the assembly process
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, Phillips Head
Screwdriver and Hammer
Failure to do so may result in stripping the screw.
Quick
Tip
1
2
3
5

Board
Not actual size
4
ameriwoodhome.com
x1
-T9810096010
SQUARE TABLE TOP
x4
-T9810096020
WOODEN LEGS
B
A

Part List
Not Actual Size
5
ameriwoodhome.com
x8 TAT0042
WASHER-SPRING 5/16”(RB)
x8
x8
TAT0043
NUT-HEX NUT
5/16" (18MM)(RB)
x4
TAT0044
ADJUST SCREW
M6 X 25MM X 22MM
x1
TAT0045
WRENCH 13MM
12
34
5
TAT0041
WASHER-FLAT 5/16”(RB)

6
ameriwoodhome.com
Use this step if you are fastening the ADJUST SCREW(EH0254) to Wooden Legs.
X4
4
Step 1
4
TAT0044
x4

7
ameriwoodhome.com
Use this step if you are fastening the Wooden Legs to Top Panel
IMPORTANT! Align holes of Wooden Legs with proper holes of Square Table.
A
B
B
B
B
1
2
3
5
Step 2
2
TAT0042
x81
TAT0041
x8 5
TAT0045
x13
TAT0043
x8

8
ameriwoodhome.com
Step 3

9
ameriwoodhome.com
Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is
not approved for use with a television.
Cer of Conformity
1. This cer cate applies to the Dorel Home Furnishings, Inc. product iden fied by this instru manual.
2. This cer cate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South
Wright City, MO 63390
636-745-3351
4. Site of Manufacture: Muar, Malaysia.
5. See front page of instruc n manual for date of manufacture.
This unit has been designed to support the maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse, and/or serious injury.
100 lbs (45 kg).max
Maximum Loads

10
ameriwoodhome.com
Register your product to receive the following:
* New trend details -sneak peek on what's new
* Surveys -have a voice within our community
* Exclusive deals and discount codes
* Quick and easy replacement part service
To register your product, visit
Visit your local retailer's website, rate your purchased
product and leave us some feedback!
We would like to extend a big "Thank You" to all of
Ameriwood product, and to give is your valuable
feedback.