Amphenol Surlok Plus SLPPA16BSR User manual

Amphenol
Industrial Operations
Amphenol Technology (Zhuhai) Co., LTD.
Amphenol Technology (Zhuhai) Co., LTD
No.63, Xinghan Road, San ao Town, Jinwan, Zhuhai, PRC, 519040
http://www.amphenol-industrial.com
Document NO
.
Date 20171017
Rev.
C
The Cable Assembly Work Instruction
装配作业指导书
5.70mm Surlok Plus Right Angle Plug Connector
5.70mm Surlok+ 90度插头连接器

Part 1 Package contents
第一部分：包装清单
① ：Connector Body 连接器本体
1-1: Barrel sealing (Not included when no sealing requirement)
前密封圈（无防水要求时不提供此零件）
1-2: O-Ring (Not included when no sealing requirement)
后密封圈（无防水要求时不提供此零件）
② ：Barrel(Only for cable size 16mm
2
) 套筒(当线材规格为16mm
2
时使用此套筒)
③ ：Grommet(Not included when no sealing requirement)
橡胶密封圈（无防水要求时不提供此零件）
④ : Back Shell 后壳
For 16mm2
For 25mm2

Part 2 Plug assembly
第二部分：插头组装
Step 1 Wire cutting and stripping （Apply for 16mm
2
& 25 mm
2
Cable
）
步骤1：线的裁剪和剥皮（适用于16mm
2
和 25 mm
2
线材）
Stripping conductor: 18±1mm
剥导体长度：18±1mm
Step 2 Un-assemble item 3&4 over the cable as shown
步骤2：如下所示,将密封圈和后壳套在线材上
Item 3
Grommet
Item 4
Bac shell
Correct direction: The chamfer in the rear position
正确组装方向：倒角在后方
Wrong direction: The chamfer at the front position
错误组装方向：倒角在前方

Step 3 Put the barrel and the cable conductor into the lug
步骤3：将套筒和线材导体部分插入线耳中
Step 4 Crimping the lug as shown
步骤4：如图所示将线耳压接到线材导体部分
Cable size
线材尺寸
cable range
线材外径范围
Crimping heigth
压接高度
Cable pullout force
线材压接拔出力
16 mm
2
8.10±0.20 mm 7.5+0/-0.2mm 1000N Min.
25 mm
2
10.20±0.20 mm 1200N Min.
Recommended crimping tool: Manual hydraulic crimping
推荐压接工具：手动液压压接钳
Die: 25 mm
2
压模：25 mm
2
Gap is 1.0mm max.
间隙不可超过1.0mm
Tie closely in here
此处需贴紧

Step 5 Install grommet and back shell
步骤5：组装橡胶密封圈和后壳
Tighten back shell to the indicated location shown as picture above by hand or tool.
通过手或工具拧紧外壳至上图所示的位置.。
The recommended torque is 0.7~0.8N.m
推荐扭矩0.7~0.8N.m
Recommended gap is 0. ~1.0mm.
推荐间隙0. ~1.0mm.