Amprobe LT-10-EUR User manual

Lamp Tester
www. .com [e-mail]1.800.561.8187

English
LT-10
LT-10-EUR
Leakage Clamp Meter
User Manual
www. .com [e-mail]1.800.561.8187

LT-10 / LT-10-EUR Lamp Tester
CONTENTS
SYMBOL
SAFETY INFORMATION
UNPACKING AND INSPECTION
FEATURE
OPERATING THE LAMP TESTER
DETAILED SPECIFICATIONS
MAINTENANCE
TROUBLESHOOTING
BATTERY REPLACEMENT
www. .com [e-mail]1.800.561.8187

1
1
2
4
8
5
7
8
3
2
3
4
5
6
LT-10 / LT-10-EUR Lamp Tester
6
7
www. .com [e-mail]1.800.561.8187

SYMBOLS
SAFETY INFORMATION
CENELEC Directives
www. .com [e-mail]1.800.561.8187

For Use by Competent Persons
Warning: Read Before Using
To avoid possible electric shock or personal injury:
UNPACKING AND INSPECTION
FEATURES
www. .com [e-mail]1.800.561.8187

OPERATING THE TESTER
Precautions:
www. .com [e-mail]1.800.561.8187

www. .com [e-mail]1.800.561.8187

1
2
Attaching and Removing the Adapter Plate
LAMP TEST
• Verify lamp test function on a known lamp and/or on the identical
lamp model both before and after use to ensure the instrument is in
good working condition.
• On a very few particular linear fluorescent types, testing against the
glass surface of the lamp may not respond. Testing on the lamp socket
pin via the instrument’s probe (direct metal-to-metal contact) shall
allow good lamp response from a working lamp.
www. .com [e-mail]1.800.561.8187

Testing Fluorescent Lamps
Lamp test with antenna
Do not touch the live parts with the antenna.
To avoid electric shock, do not touch ANY part of antenna
during lamp or voltage tests. Touching antenna during these tests
affects tester sensitivity.
www. .com [e-mail]1.800.561.8187