AMX Mio Modero DMS User manual

mio modero®dms &
mio modero®dms pinnacle keypads
WHAT A VIEW
Get ready to change your perspective on dynamic menu system keypads.
AMX’snew Mio ModeroDMS and DMS Pinnacle Keypads featureabright,
easy-to-read 4" monochrome LCD display and two new innovative ways to
experience control.
EXTERNAL PUSHBUTTONS
The Mio ModeroDMS Keypad has eight external pushbuttons, allowing the
end user to scroll through menu items and make selections.
SLIDER & TOUCH OVERLAY
The Mio Modero DMS Pinnacle Keypad comes with a slider and includes a
touch overlay on the LCD, providing responsive control for the end user.
SPEEDY NAVIGATION
Both keypads possess a Dynamic Menu System structure that allows for
speedy navigation. Simply press the up and down external pushbuttons to
scroll line-by-line, page-by-page. With the touch of a finger, the slider takes
you through entire page flips. Results in a matter of seconds.

MIO-DMS (FG2408-01)/
MIO-DMS-P (FG2408-02)
Preliminary Specs Subject to
Change
WIRING
-RJ-45 port for Ethernet or
Power over Ethernet (PoE)
-2-pin 3.5mm captive-wire power
connector
FACEPLATE DIMENSIONS
(HWD)
-DMS: 4.5" x 3.6" x 0.38"
(114.3mm x 91.4mm x 9.7mm)
-DMS Pinnacle: 4.5" x 3.6" x
0.425" (114.3mm x 91.4mm x
10.8mm)
BACKBOX DIMENSIONS
-3.9" x 2.95" x 2.45" (99mm x
75mm x 62.2mm)
WEIGHT
-10 oz (283 g)
POWER
-5.5 Watts (450 mAmps at
12VDC)
COLORS
-Black
-White
-Beige
-Ivory
-Almond
-Light Almond
-Taupe
-Brown
-Gray
-Gold Metallic
-Silver Metallic
mio modero®dms &
mio modero®dms pinnacle keypads
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
REL DATE
07-25-05 JSV
PICTORIAL
ELROND 1
WALL MOUNT TOUCH PAD
HARD BUTTONS
95-2408-01
95-2408-01
1
FULL
1 OF 1
DWG. NO.
D
SCALE:SIZE
SHEET
REV.
REV APPR
1NA PRELIMINARY 07-26-05 JSV
REV ECN DESCRIPTION
REVISIONS
DATE APPROVED
All information contained herein
reproduced, or used as the basis
for manufacture or sale without
This drawing may not be copied,
has been previously established.
to the extent the information
shall be confidential except
that is not generally known
property of AMX Corporation.
NOTICE: This drawing is the
written permission.
REL APPR
= +.008 -.005 PROD ENGR OVER .500
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
DO NOT SCALE THIS DRAWING.
ANGLES: +/- 1.0°
ALL DIMENSIONS IN INCHES.
THIRD ANGLE
PROJECTION
MATL SUP
QUALITY
XXX = .005
= +.006 -.005
= +/- .005
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON HOLE DIAMETERS:
.250 TO .500
UNDER .250 ú ENGINEER
ENGR SERV
DRAWN
REL DATE
07-25-05 JSV
PICTORIAL
ELROND 1
WALL MOUNT TOUCH PAD
HARD BUTTONS
95-2408-01
95-2408-01
1
FULL
1 OF 1
DWG. NO.
D
SCALE:SIZE
SHEET
REV.
REV APPR
1NA PRELIMINARY 07-26-05 JSV
REV ECN DESCRIPTION
REVISIONS
DATE APPROVED
All information contained herein
reproduced, or used as the basis
for manufacture or sale without
This drawing may not be copied,
has been previously established.
to the extent the information
shall be confidential except
that is not generally known
property of AMX Corporation.
NOTICE: This drawing is the
written permission.
REL APPR
= +.008 -.005 PROD ENGR OVER .500
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
DO NOT SCALE THIS DRAWING.
ANGLES: +/- 1.0°
ALL DIMENSIONS IN INCHES.
THIRD ANGLE
PROJECTION
MATL SUP
QUALITY
XXX = .005
= +.006 -.005
= +/- .005
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON HOLE DIAMETERS:
.250 TO .500
UNDER .250 ú ENGINEER
ENGR SERV
DRAWN
REL DATE
07-25-05 JSV
PICTORIAL
ELROND 1
WALL MOUNT TOUCH PAD
HARD BUTTONS
95-2408-01
95-2408-01
1
FULL
1 OF 1
DWG. NO.
D
SCALE:SIZE
SHEET
REV.
REV APPR
1NA PRELIMINARY 07-26-05 JSV
REV ECN DESCRIPTION
REVISIONS
DATE APPROVED
All information contained herein
reproduced, or used as the basis
for manufacture or sale without
This drawing may not be copied,
has been previously established.
to the extent the information
shall be confidential except
that is not generally known
property of AMX Corporation.
NOTICE: This drawing is the
written permission.
REL APPR
= +.008 -.005 PROD ENGR OVER .500
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
DO NOT SCALE THIS DRAWING.
ANGLES: +/- 1.0°
ALL DIMENSIONS IN INCHES.
THIRD ANGLE
PROJECTION
MATL SUP
QUALITY
XXX = .005
= +.006 -.005
= +/- .005
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON HOLE DIAMETERS:
.250 TO .500
UNDER .250 ú ENGINEER
ENGR SERV
DRAWN
REL DATE
07-25-05 JSV
PICTORIAL
ELROND 1
WALL MOUNT TOUCH PAD
HARD BUTTONS
95-2408-01
95-2408-01
1
FULL
1 OF 1
DWG. NO.
D
SCALE:SIZE
SHEET
REV.
REV APPR
1NA PRELIMINARY 07-26-05 JSV
REV ECN DESCRIPTION
REVISIONS
DATE APPROVED
DMS
DMS Pinnacle
01.006 © 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX . AMX reserves the right to alter specifications without notice at any time.
.28
7.1mm
3.90
99mm
3.60
91.4mm
2.95
75mm .32
8.1mm
.425
10.8mm 2.45
62.2mm
4.50
114.3mm
.28
7.1mm
3.90
99mm
3.60
91.4mm
2.95
75mm .32
8.1mm
2.45
62.2mm
.38
9.7mm
.08
2.0mm
4.50
114.3mm