NXT-CV10/NXT-CV10/PB DATA SHEET
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
NXT-CV10/PB
(Front View)
NXT-CV10
(Front View)
NXT-CV10
(Right View)
5.00
[127 mm]
11 3/16”
(28.3 cm)
7 3/8”
(18.8 cm)
7 15/16”
(20.2 cm)
NXT-CV10 Without Pushbuttons (FG2259-01K)
NXT-CV10/PB With Pushbuttons (FG2259-03K)
DIMENSIONS (HWD)
7 15/16” x 11 3/16” x 7 3/8” (20.2 cm x 28.3 cm x 18.8 cm)
WEIGHT
2.65 lbs (1.21 kg)
POWER
•Constant current draw: 1.2 A @ 12 VDC (stand alone)
•Startup current draw: 1.8 A @ 12 VDC (stand alone)
•Minimum Power Supply Required:
PSN2.8 Power Supply (FG423-17)
(Using accessories can increase the power draw
requirements)
MEMORY
•64 MB on-board memory
•256 MB Compact Flash (upgradable to 1 GB
factory programmed)
LCD PARAMETERS
•Aspect Ratio: 16:9
•Brightness: 350 cd/m2
•Channel transparency: 8-bit Alpha blending
•Contrast ratio: 250:1
•Display colors: 256K (18-bit color depth)
•Dot/pixel pitch: 0.28 mm
•Screen resolution (HV): 800 X 480 pixels @ 60 Hz
frame frequency
•Video formats: NTSC, PAL, and SECAM
VIEWING ANGLE
•95° total viewing angle
•Vertical: + 45° (up from center) and -65° (down
from center)
IR RECEPTION ANGLE
•Horizontal: + 50° (left and right from center)
•Vertical: + 30° (up and down from center)
SUPPORTED AUDIO SAMPLE RATES
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,
12000Hz, 11025Hz, and 8000Hz
FRONT PANEL
•Light Sensor: Photosensitive light detector for automatic
adjustment of the panel brightness
•Motion Sensor (PIR): Proximity Infrared Detector to wake
the panel when panel is approached
•IR Receiver: 38 KHz and 455 KHz AMX IR frequencies
•Sleep Button: Pushbutton (gray) provides both access to
the Setup and Calibration page and toggles the panel
between a “sleep” or “wake” state
•Microphone: Used for intercom applications
(requires the NXA-AVB/ETHERNET Breakout Box for
analog communication)
•Speakers: Stereo output with a frequency response of
500 Hz - 7 KHz
•LEDs: 6 blue LEDs (support On and Off)
(On FG2259-03K only)
•6 programmable pushbuttons (On FG2259-03K only)
REAR CONNECTORS
•Mini-USB Connector: 5-pin Mini-USB connector used for
programming, firmware update, and touch panel file
transfer between the PC and the target panel
•Stereo Output Connector: Stereo output through a 3.5mm
mini-jack (for use with external speakers or headphones)
•Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps
communication
•USB Connector: Type A USB port connects an external
keyboard or mouse device for use with Virtual PC
applications
•Audio/Video Connector: RJ-45 connection for A/V signals
(via CAT5) between the NXA-AVB/ETHERNET Breakout Box
and the panel
•Power: 2-pin 3.5 mm mini-Phoenix connector
CERTIFICATIONS
FCC Part 15 Class B, CE, and EN60950
OPERATING/STORAGE ENVIRONMENTS
•Operating Temperature: 10° C (50° F) to 40° C (104° F)
•Operating Humidity: 20% to 85% RH
•Storage Temperature: -20° C (-4° F) to 60° C (140° F)
•Storage Humidity: 5% to 85% RH
BTU/HR
61.5
INCLUDED ACCESSORIES
•Installation Kit (KA2259-01)
•Modero 10’ Table Top Cable (CA2250-50)
•NXA-AVB/ETHERNET Breakout Box (FG2254-10)
