Anchor Venue Series User manual

EC 5158 VenBod 1-17
Please read all assembly / installation instructions before the installation or removal of this product.
7701 Highway 41 N
Evansville, IN 47725
Phone: [phone]
Fax: [phone]
1-800-544-4445
email: [email protected]
www.anchorinc.com
Installation Instructions
Venue Series - Bodega Appendix
Use this Appendix with the Anchor Structure
Venue Series Instruction Manual

2
VENUE BODEGA SIZES AND CONFIGURATIONS
Note: Follow the standard Anchor Venue Assembly Instructions. This structure is assembled in the
same manner as the standard structure except as noted.
3.0 m
2.7 m
4.3 m
4.3 m
4.5 m
4.5 m
1.2 m 1.2 m
9m
9m
6 m
Arch
6 m
Arch
4.5 m
4.5 m
9 METER
9 METER w/Overhang
9 METER
1.5 m
1.5 m w/ 1m
overhang
Gable end
framing
Gable end
framing
Rafter size (typ.)
Rafter size (typ.)

3
12 METER w/Overhang
3.0 m
2.7 m
4.8 m
4.8 m
1.2 m
4.5 m
4.5 m
12m
12m
6 m
Arch
6 m
Arch
4.5 m
4.5 m
3 m
3 m
12 METER
12 METER
3 m w/ 1m
overhang
3 m
Gable end
framing
Gable end
framing
Rafter size (typ.)
Rafter size (typ.)
3.0 m
2.7 m
5.4 m
5.4 m
4.5 m
4.5 m
15 m
15 m
6 m
Arch
6 m
Arch
3.0 m
3.0 m
4.5 m
4.5 m
15 METER
15 METER w/ Overhang
15 METER
3.0 m
3.0 m
4.5 m
Gable end
framing
Gable end
framing
Rafter size (typ.)
Rafter size (typ.)
4.5 m w/ 1m
overhang

4
6 m
Arch
6 m
Arch
6.0 m
4.5 m
1.5 m
18 METER
3.0 m
5.9 m
4.5 m 18 m 4.5 m 4.5 m
18 METER
4.5 m
18-9 METER
18-9 METER w/ Overhang
6.0 m
Arch
6.0 m
Gable end
framing Rafter size (typ.)
Rafter size (typ.)
6 m
Arch
6 m
Arch
6.0 m
4.5 m
1.5 m
2.7 m
5.9 m
4.5 m
18 m 4.5 m 4.5 m
4.5 m
6.0 m
Arch
6.0 m
Gable end
framing Rafter size (typ.)
Rafter size (typ.)
6 m w/ 1m
overhang
18 METER w/ Overhang

5
Rafter (Typ.)
Bodega
Center Rafter
(Typ.)
Upright
Assembly (Typ.)
Note: Arches for (2) bays shown.
Diagonal Beam
Brace (Typ.)
Base Plate
(6 hole) (Typ.)
End Arch
Figure 5
3/4” Bolts
Upright
Assembly
3/4” Nut
Rafter
Bodega
Center
Rafter
Bodega
Center
Rafter
Rafter
Eyenut
Rafter
Swivel-Lock Pin
Swivel-Lock
Pin
Assembling Arches & Cable Bracing
Figure 2.3a Figure 2.3b
Eye Nut in place
of lock nut
3/4” Bolt
Follow the instructions in the standard Venue manual except as noted in this illustration.

6
Figure 6
Rafter
Gable End Fabric
View from underneath overhang at gable end.
Upright-Rafter Connecting
Bracket fastens to bottom
rafter channels as shown.
Inside View. Place
Bracket with connecting
bolts to inside of frame.
Install Intermediate Gable End upright
with Locking L-pin as shown in Figure
3.5b in standard Venue Installation
manual.
Install Gable End Framing
Follow the instructions in the standard Venue installation manual except for 12M Structure.
The 12M will require an upright-rafter connecting bracket assembly attached to the Bodega Center
Rafter.
Install Fabric Panels
Follow the instructions in the standard Venue installation manual except as follows.
Mids will be tensioned as shown.
Gable End has no lace. Pull in and over from one end and tension as shown.
Tension bar installed in tension pocket
with tension strap at standard position. Tension bar installed in tension
pocket with tension strap at
standard position.
Threaded tensioner for
tensioning mid tension bar at
end of overhang.
Gable End Fabric Mid Fabric

7
Venue Bodega with Overhang