&Tradition BELLEVUE AJ8 User manual

BELLEVUE TABLE AJ8
BY
ARNE JACOBSEN
1929
Congratulations on choosing this original Bellevue table lamp designed by
Arne Jacobsen. We hope you will enjoy using this product and follow
these instructions to ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by mail on:
[email protected]
USER INSTRUCTIONS
A
B
C
D
CONTENTS
A- Lamp shade
B- Adjustable swan-neck
C - 2 meter cord
D- Switch
Please read these instructions carefully and retain them for future reference to ensure
that the lamp is used correctly. For your own safety, please study each step of this
instruction manual rst. &tradition is not responsible for any faults or damages caused
by not following these instructions correctly. Do not modify this lamp in any way.
INSTALLATION SUGGESTIONS
The Bellevue AJ8 desk lamp can be used as a stand alone lighting source or in combination
with the other lamps in the Bellevue series. Place it on a work desk, side table, credenza
or bedside table. The lamp can also be used in combination with the rest of the &tradition
collection. Visit our website for more inspiration:
www.andtradition.com
SAFETY PRECAUTIONS
- Dispose of plastic bag from packaging and do not allow children to play with it.
- The lamp is only intended for interior use.
- Lamp shade gets hot after prolonged use.
- Do not place the cable in reach of small children or anywhere there is a risk of
falling over it.
CLEANING INSTRUCTIONS
The Bellevue lamp is made from solid brass and lacquered aluminum. The brass used
is uncoated and will therefore develop a unique and beautiful patina over time.
To ensure the lamp will look beautiful for years to come, please only use a dry soft cloth
to clean the lamp. Never use aggressive detergents or abrasive cleaning agents as this
will damage the surface of the lamp.
ANDTRADITION.COM

STEP 2
Use the exible swan-neck to set the shade at a desired angle. It is best to set the
angle before turning the lamp on as the shade gets hot when the lamp is in use
for longer periods of time.
STEP 1
The lamp accepts standard screw mount bulbs:
Maximum 40 W.
E14 bulb.
220-240V - 50 Hz