&Tradition FLOWERPOT GARDEN VP3 User manual

FLOWERPOT VP3
by Verner Panton
ASSEMBLY
INSTRUCTIONS
Congratulations on choosing this original
FlowerPot table lamp, designed in 1969
by Verner Panton. We hope you will
enjoy using this lamp and follow these
instructions to ensure correct use. If you
have any questions or comments, please
do not hesitate to contact us by mail on:
[e-mail]
andtradition.com

- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- The lamp is only intended for interior use.
- Lamp exterior gets hot after prolonged use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable in reach of small children or anywhere there is a risk of falling over it.
A- Shade
B- Undershade & base
C- Lamp hilder collar
D- Shade stand with
star washer
E- logo ring & ball nut.
Contents:
Installation Suggestions:
Please read these instructions
carefully and retain them for
future reference to ensure that
the lamp is correctly installed
should it be moved or sold. For
your own safety, please study
each step of this instruction
manual before you commence
installation. &Tradition are
not responsible for any faults
or damages caused by not
following these instructions
correctly. Do not modify this
lamp in any way.
The FlowerPot VP3 table lamp can be used as a stand alone lighting source or in combination
with the other lamps in the FlowerPot series. Place it on an office desk, cabinet or bedside
table. Different colours can also be combined. Visit our website for more inspiration:
www.andtradition.com
Safety Precautions:
Bulb type:
E27 fitting 40 watt
tungsten or 7 watt low
energy bulb.
A
B
C
E
D
Cleaning Instructions:
- Wipe surface of lamp shade with a soft, damp sponge or cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household glass cleaner or
cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth or feather duster..

Fit a light bulb to the lamp holder and ensure that it
sits tight. Avoid using any type of bulb that comes
into direct contact with the shade stand to avoid
over heating or failure.
Connect the lamp to an electrical socket and enjoy
using your new lamp.
Attach the star washer and lamp shade to the top
of the shade stand. Place the logo ring over the top
of the stand and mount and tighten the nut. Ensure
that the shade sits tight on the lamp.
Unpack the lamp and unscrew the plastic ring from
the light fitting.Place the shade stand onto the light
holde and fix in place by re-mounting the plastic
ring.
01.
02.
03.
04.

KONGEVEJEN 2. DK-3480 FREDENSBORG.
T. [phone] F.+45 39200256
[e-mail] WWW.ANDTRADITION.COM
Maximum 40 W.
Tungsten E27 bulb.
Maximum 7 W.
Low Energy E27
bulb.