&Tradition Manhattan SC52 User manual

Congratulations on your new Manhattan lamp,
designed in 2020 by Space Copenhagen. We hope
you will enjoy using this product and follow these
instructions to ensure correct installation. If you have
any questions or comments, please do not hesitate to
contact us by mail on:
in[email protected]
Manhattan SC52
Space Copenhagen
2020
Instructions

A
B
Manhattan SC52
Space Copenhagen
2020
C
D
E
PP
UU
LLLL
PULL
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
ALamp shade
B Lamp base
C Battery compartment (incl. 1 battery)
D LED G4 1W light bulb
E Magnetic USB charging cable
Tools needed
Screwdriver (for battery replacement)
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- The lamp is only intended for interior use.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the USB cable within reach of small
children or anywhere with a risk of falling over it.
Cleaning instructions
- Wipe surface of the shade with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or sti brushes.
- Never use strong cleaning agents such as white spirit,
terpentine, household glass cleaner or cellulose thinners.
&Tradition will not accept any responsibility for any
accidents or injuries that occurs due to the use of incorrect
USB cable input. The battery must be removed from the
luminaire before it is scrapped; the appliance must be
disconnected from the supply mains when removing
the battery; the battery must be disposed safely.
For furhter information or inquiry, please do not hesitate
to contact &Tradition by mail on [email protected].
For indoor use only
Input 5.0V 1A USB cable
G4 Max 1.5 Watt dimmable LED bulb
1 × Rechargeable &Tradition battery
Charging time
1 battery: 3.5 hours
2 batteries: 6 hours
Operating time on highest setting
1W LED light bulb 1 battery: 11 hours
2 batteries: 20 hours
Step 1
Remove plastic slip to activate the battery by pulling the
slip out from the compartment.
Step 2
Insert the LED light bulb. Please make sure to fit the
plus pole (+) of the LED into the plus pole (+) on the
socket. Carefully lower the shade onto the base and turn
clockwise to install it.
Make sure the groove in the battery compartment is
aligned with the same groove of the base.
Step 3
Before use, the battery in the lamp needs to be charged.
Attach the magnetic USB cable onto the magnetic bottom
on the base and connect the USB cable to a power supply.
03/21

Replacing battery
Step 1
To replace the battery, start by deattaching the shade by
turning counter clockwise and lift o the shade. Remove
the LED light bulb. Gently press on top of the socket
until the battery compartment pops out of the bottom.
Step 2
Unscrew the screw in the battery compartment by turning
counter clockwise and remove the lid.
Step 3
Remove the battery and replace it with a new one. Place
the battery correctly by turning the plus and minus pole as
stated in the battery compartment. When reinstalling the
lid please be aware to mount it gently by not overturning
the screw in the threading.
Remember to only use ocial rechargeable batteries from
&Tradition. If desired, two batteries can be installed to
achieve longer operation time. For further information or
inquiry, please do not hesitate to contact &Tradition by
mail on [email protected].
andtradition.com