anko Cat Tower Flower User manual

Cat Tower Flower

Contents

Assembly Instructions
Step 1.
Using the Hex key and screws (C x 6) connect screw poles (No.11 x 3) and boards (No.2 x 1 &
No.3 x 1). Place the Plush House Cover (6) over the assembled boards and poles.
Step 2.
Using the Hex key and screws (B x 2), screw the house (No.6 x 1) and pole (No.8 x 1) on
board No.1. For pole placement please refer to the image below.
Step 3.
Insert the screw (A x 1) into pole No.8. Attach the board (No.7 x 1) on screw A. Screw pole
(No.10 x 1) onto screw A. Using the Hex key and screw (B x 1) screw pole (No. 8 x 1) with the
house NO.6. For pole placement please refer to the image below.

Step 4.
Insert the screw (A x 1) on pole No.8. Attach the board (No.4 x 1) on screw A. Screw pole
(No.9 x 1) on screw A. Using the Hex key and screw (B X 1) screw board (No.4 x 1) together
with the pole (No.10 x 1). Then screw board (No.5 x 1) with pole No.9. See below image.
WARNING:
For your pet’s safety, inspect regularly and remove if damaged.
Always supervise your pet during play.