anko Dog Treat Orb User manual

Dog Treat Orb

Contents
Tech Specs
Dog Treat Orb
Upper Food Lid
Grip Point
Lower Food LidPuzzle Pod A
Rotating Cover
Speaker
Treat Dispensing Window
Puzzle Pod B
Shell
Power Core
ON/OFF Button
Baery 2 x 1.5V AAA baeries (not including)
1

Set-Up Instrucons
1. Twist the upper treat lid unl it opens and screw the rotang cover of the device.
2. Remove the power core.
3. Unscrew the back of baery box with a screw driver, insert a pair of 1.5V AAA baeries (not included)
and ghten the screws with a screwdriver (not included).
4. Put the power core back, twist the rotang cover and upper treat lid unl the device locks in place.
1. 2.
3. 4.
not including
2

Filling Treats into the Orb
Orb Funcon
1. Twist the treat lid to open it.
2. Add your dog’s favorite treat into the puzzle pod.
3. Put the lid back and twist it unl ght.
2. Time to roll, eat and play!
Note: The device will enter into sleep mode aer one minute; pat to reacvate it.
1. Press and hold the ON/OFF buon for 3 seconds, and it will make a sound. Then put the ball on
the floor.
3 Secs.
3

Cleaning the Orb
1. Open the device and remove the power core;
2. Wash the washable parts by food detergent or fresh water and dry it before using again.
Unwashable×Washable √
4

1. The device is especially designed for pets. This is not a child's toy. Please keep out of reach
of childrenexcept under adult supervision.
2. Not a chew toy. Do not provide it for heavy chewers. Always supervise your pet while your
pet is playing.Please take away the device if it is damaged, broken or falls apart, as this may
lead to undesirable injuries.
3. The power core part is not washable, so please keep it away from water.
4. Check the device regularly, in case the core is damaged, and the electrical power hurts the
dog (Pleasebe careful even the working voltage is very low).
5. Recommended to use the device where the ambient temperature is between 0°C and
40°C.
6. The safety gear is designed for power core protecon and it rales when the ball falls
down. Please restassured that the use of the product.
7. Do not mix old and new baeries or baeries of different brands. Do not mix alkaline,
standard, orrechargeable baeries. Only use baeries of same or equivalent type as
recommended. Do not userechargeable baeries.
Warning
3

8. Insert baeries with the correct polarity and always follow the manufacturer’s instrucons.
9. Remove baeries if product will be stored for an extended period.
10. Dispose of used baeries responsibly.
4