anko CWD40 40-1X-12 User manual

Heated Pet Bed
Model no.: CWD40*40-1X-12
User manual
IMPORTANT INSTRUCTIONS
RETAIN FOR FUTURE REFERENCE

IMPORTANT SAFETGUARDS
WARNINGS Before using the product, please read the following instructions carefully to ensure
your safety and prevent damage to the product:
•This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
•Children shall not play with the appliance.
•Cleaning and user maintenance should not be done by children without competent adult
supervision.
IMPORTANT! The appliance is only to be used with the adaptor provided with the appliance.
•The heat pad must be kept clear of dust or other dirt particles. The appliance must be
disconnected from mains power during cleaning and when storing.
•Do not use if the appliance shows any signs of damage. Heated pet Bed must only be supplied
at SELV.
IMPORTANT! For electrical safety, any repairs to the product must be carried out by a qualified
electrical person only.
•For additional protection, it is strongly recommended that the use of a residual current device
(RCD/safety switch)with a tripping current not exceeding 30mA be used on the circuit supplying
mains power to this product.
•Remove any packaging material before using the Pet Bed for the first time. Safely dispose of all
plastic bags and other packaging material that may be potentially dangerous to young children.
•The Pet Bed is intended only for indoor use.
CAUTION! Electric Shock Hazard. Never submerge the power cable and the adaptor.
Although the heated mat is watertight, it must never be submerged in water or any other liquid.
•Always disconnect the appliance from mains power before carrying out any maintenance,
cleaning and in case you won’t use the product for a long period.
•The heated mat is intended to be used only inside the bed supplied; do not use it on any other
product.
•Do not crush, deform or fold the pad, this will damage the heating cable inside the pad.
•Power cable must be placed or protected to ensure it is not accessible to animals.
•This is not a product for heating people or medical use in a hospital.
•No liability can be accepted for any damage caused by non-compliance with these instructions
or any other improper use or mishandling.
•The unit should be examined frequently for signs of wear or damage. If there are such signs or
if the unit has been misused, do not use the Pet Bed.
•If the supply cord is damaged, it must be replaced by a qualified electrical person in order to
avoid a hazard, or the product must be disposed of.
•The Pet Bed shall not be operated by means of an external timer or separate remote-control
system.
•Do not use with wires tucked in.
•Do not insert pins or sharp objects into the Electric Pet Bed.

•Unplug from the mains supply when not in use.
•Do not use outdoor.
•This Pet Bed must be kept in fully spread condition at all times during use to avoid overheating.
•Do NOT attempt to repair the Pet Bed. There are no customer serviceable parts inside. Return
it immediately to Kmart if it is faulty in any way during the warranty period.
•When storing, allow the Pet Bed to cool before folding. Fold gently but do not crease the Electric
Heat Pad. To prevent creasing do not place any other items on top of the Heat Pad during
storage.
•Do not wash the Electric Heat Pad. Clean the Pet Bed in accordance with the instructions
provided under the heading ‘Care & Maintenance’ in this manual.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

OPENING THE PACKAGE
Inside the package you will find:
• 1 x Pet Bed
• 1 x Electric heated mat (12V)
• 1 x adaptor LY120-120-1000A
PARTS
A.
Pet Bed (washable)
C.
Power cable
B.
Electric heated mat
D.
Adaptor
INSTALLING THE PRODUCT
•Insert the Electric Heated Mat inside the special pocket of the Pet Bed then close the zip. Make
sure your pet cannot remove it.
•Place the Pet Bed on a flat and regular surface.
•Make sure the Power Cable comes out of the bed without being squashed or damaged.
•Insert the Power Cable through the special hole at the back of the bed.
•Place the Power Cable so that your pet cannot bite or damage it.
•Connect the Electric Heated Mat to the adaptor and then to mains power.
•Allow the mat to heat up at least for 15-20 minutes to reach its optimum operating temperature.
THE PET BED DOES NOT HAVE THE SAME EFFECT OF A THERMIC BLANKET.
WARM TEMPERATURE SUITABLE FOR A HUMAN BEING COULD BE TOO HOT FOR
A PET.

CARE AND MAINTENANCE
•Periodically check the product is in good working order and ensure that it has no signs of damage,
in particular the power cable and heated mat.
•Before storing the product allow it to cool down.
•Do not crease the appliance by placing items on the top of it during storage.
•Clean the heated mat with a soft cloth or wet sponge; do not use detergents or chemical
substances.
•Wash the bed following care instructions on the product label.
TECHNICAL DATA
Bed Size:
18cm(H)×68cm(W)×60cm(D)
Heat pad voltage:
12V DC
Heat pad power:
10W
Adaptor:
LY120-120-1000A
Input: 100-240V 50/60Hz 0.4A Max
Output: 12V 1000mA