Anself TR-BAS20-2USB User manual

INSTALLATION INSTRUCTIONS
TR-BAS 15
2 0-2USB
Dual USB Charger with
15A/20A Duplex Tamper Resistant Receptacle
◆SPECIFICATION
Receptacle
Rating.......................................................15A/20Amp,125VAC
USB Rating...............................Two USB ports with total 4Amp, 5VDC
Wire Teminals...................................................................#14-#10AWG
Operating Temperature....................................-4 to 140℉(-20 to 60℃)
USB Compatibility..USB 1.1/2.0/3.0 devices, includingApple products
Strip Length.................0.5inch(back wire holes). 1inch(screw terminal)
◆FEATURES
⚫2USB ports with a super high-current power of 4 Amp, 5VDC
⚫Charge most compatible electrical device directly without an adapter
⚫Tamper-Resistant Shutters provide compliance with 2011 NEC Code
⚫Replace a standard duplex receptacle
⚫Back and side wire for easy installation
⚫UL listed
◆DESCRIPTION
The TR-BAS 15
2 0-2USB USB Charger/Tamper-Resistant Receptacle
offers two USB charging ports and duplex Tamper-Resistant
Receptacle. This TR-BAS 15
2 0-2USB is able to charge any current
electronic devices simultaneously, including smart phones, tablets,
e-readers, cameras and MP3 players. What’s more, it has the
capability to charge new device required higher current rating in the
future.All you will need is a USB cable to connect to one of the two
USB ports.
◆APPLICATION
◼Cafes
◼Labs
◼Office
◼Hospital
◼Kitchens
◼Salons
◼Bedrooms
◼Hotels
◼Restaurants
◼Schools
◼Meeting Rooms
◼Libraries
◼Airport Lounges
◼Workstations
-01-
◆COMPATIBILITY
The TR-BAS 15
2 0-2USB Charger-Resistant Receptable is compatible
with a wide range of electronic devices including, but not limited to the
following:
-iPad®
-iPhone®
-iPad®Mini
-iPod®
-Tablets
-GPS
-Mobile Phones
-Galaxy TabTM
-Blackberry®, Android Phones
-BluetoothTM Headsets
-Windows®Phone by HTC
-Digital Cameras
-KindleTM, Nook e-reader
-Other USB compatible products
If the devices combined power requirements exceed the power
capacity of the USB Ports, the charger will automatically shut down to
protect your devices.
Charges most USB powered devices
◆INSTALLATION
WARNING:To avoid fire, shock, or death. Turn off power at circuit
breaker or fuse and test that power is off before wiring.
AVESTISSEMENT: Pour éviter un incendie, des chocs ou le décès,
couper le courant au disjoncteur ou au fusible et vérofoez que
I’alimentation est coupée avant de cabler.
To be installed and /or used in a accordance with appropriate electrical
codes and regulations.
Pour étre installéet/ou utilisécomformément aux codes et aux rè

glements électriques appropriés.
-02-
If you are unsure or uncomfortable about performing the installation,
please consult a qualified electrician.
Si vous n’ètes pas sür ou mal àI’aise d’effecturer I’installation, vous á
pouvez consulter un électricien qualifiè.
1. For retrofit applications, remove wall plate and mounting screws.
2. Carefully remove the existing receptable from the box.
3. Disconnect the wiring from the old receptacle.
4. Connect the TR-BAS15-2USB per wiring diagram: black lead to hot
wire, white lead to neutral wire, green lead to ground wire.
5. Tighten every screws and no bare conductors are exposed, 9-12
pound inch(1.0-1.4Nm) of torque.
6. Insert the TR-BAS 15
2 0-2USB in wall box with screws provided and
mount wall plate.
7. Restore power at circuit breaker, installation is complete.
Wiring Diagram Cu Al
◆WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials
and workmanship for a period of two(2) years, There are no
obligations or liabilities on the part of our company for consequential
damages arising out of, or in connection with, the use or performance
of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation or
reinstallation.
-03-