Ansell HYLITE 47-402 User manual

INSTRUCTIONS FOR USE INTERMEDIATE DESIGN
HYLITETM gloves
A. Use
These gloves are designed to protect the hands against light to medium duty mechanical risks.
They are in conformity and are marked as per requirements of the European Directive
89/686/EEC and its Amendments and they are in compliance with the European Standards
EN 420 and EN 388.
3 1 2 1
3: Abrasion
resistance
1: Cut resistance
2: Tear resistance
1 Puncture
Resistance
EC-Type examination certificate by ITF France ( I.D. 0072 ) – Avenue Guy De Collongue
Ecully.
B. Precautions for use
NEVER USE THESE GLOVES AGAINST CHEMICALS, nor for protection against heavy duty
mechanical applications.
Do not use against flames.
Before usage, inspect the gloves for any defects or imperfections. Avoid wearing damaged or
worn out gloves.
C. Ingredients / Hazardous ingredients
These gloves do not contain any ingredients which are known to be a possible cause of allergies
to sensitised people.
If allergic reactions would occur, obtain medical advice immediately.
For more information, please contact Ansell’s Customer service department.

D. Care instructions
Storage : Keep out from direct sunlight; store in a cool and dry place.
Keep out from sources of ozone or ignition.
Cleaning : The gloves can be laundered at 60 °C maximum.
E. Disposal
Used gloves may be contaminated with infectious or other hazardous materials.
Dispose of according to Local Authority Regulations. Landfill or incinerate under controlled
conditions.
Ansell Protective Products
Internationale Laan 55
1070 Brussels
Belgium
Type Style Reference Size Length
Regular 47-402 7 , 8, 81/2, 9 , 10 270 mmFully coated
Stretch safety cuff 47-409 7 , 8, 81/2, 9 , 10 290 mm
Palm coated Knitwrist 47-400 7 , 8, 81/2, 9 , 10 270 mm