ANYKIT TS43 User manual

Model No.: TS43
Digital Inspection Endoscope

TS43 is a high-performance industrial endoscope with a 4.3-inch high-def inition
color screen.
Photo and video recording functions are supported, and saved to a
TF memory card (Micro-SD card).
This product is equipped with an LED ring light
and small-diameter HD camera.
The camera uses a high-sensitivity chip to get the
best view in the darkest places.
Product Manual
Safety and Maintenance
Battery description
Warning: This product is an industrial endoscope camera and is not intended
for medical use or human examination.
* The camera probe is a delicate electronic device, do NOT hit the camera probe,
Do NOT pull on the cable.
* The probe features a waterproof protective layer so take extra care to avoid it
from being scratched during usage.
* The camera probe materials are not resistant to high temperature. When examining
any combustion engine, please ensure that temperature inside the engine has cooled.
* This product is not suitable for people with limited physical, sensory or mental
capabilities.
* Do NOT allow children to touch or operate this device.
* In case the device is damaged, Do NOT disassemble it by yourself. Please contact
the seller or the agent where you bought it to get repair service.
· Please use a 5V household charger that meets safety regulations to charge this
device.
· This device can work while charging.
· If you do not use the device for a long time, please ensure that it is charged at
least once every 3 months to prevent irreparable damage caused by excessive
battery discharge.

2
3
4
6
1
7
8
5
2
1
2
3
4
5
6
7
8
Functions
Power button: Press and hold the Power button to turn ON/OFF
Camera probe
Snap button: Photo taking/ Start video recording/ End video recording/
Press and hold the button for a few seconds to switch between the
front-view camera and side-view camera
Light control button: To adjust the the LED’s brightness of the camera
Up selection button: Zoom Down selection button: Rotate
Mode switch button: switch between three function modes:
Photo taking, video recording and playback
Enter button: Confirm selection/ Freeze screen/ Play/ Pause
Settings button: Enter/ Exit settings menu

9
9
10
10
11
11
Functions
Instructions
TF card slot (Micro SD)Reset button
Insert TF card:
*Power off device first before insert TF
card
*Make sure the direction and the front
and back sides is correct wheninsert
the TF card
*Do not use excessive force when inse-
rting or removing the TF card to
prevent damages of card slot structure.
Charging port
Insert a TF card
Press & hold the Power button for a
few second to turn ON/OFF device.
Charge this device.

Mode: Press M to switch the three modes: Photo taking/
Video recording/ Playback
TF card status: TF card inserted/ No card
Date and time: Modify the date and time in Settings menu
1、Press the "Settings" button to enter the menu.
2、Select language setting.
3、Press the up and down button to select the desired language.
4、Press the“OK”button to save changes.
Setting path:
The default language is English, and the system supports English, Simplified Chinese,
German, French, Spanish, Italian, Russian, Japanese, Traditional Chinese, Korean and
Portuguese.
Use equipment
Language Settings

2021-08-17 08: 00 2021-08-17 08: 00
A
B
You can sue a TF card reader to copy data directly or use a Micro USB cable to
connect to a computer for copying
Micro USB data cable
Press M to switch to the“photo taking”
or“video recording”mode, and press
to take a photo or start recording.
Press M to switch to playback mode, press
to select photo or video to view,
and press to delete photo or video.
1、Press the "Settings" button to enter the menu.
2、Data transmission setting.
3、Press the "OK" key to start copying to computer.
Setting path:
Photo taking/Video recording/Playback
Copy photo and video files to computer
When copying, if the machine is not connected with the computer, click "
Data transmission" on the setting screen, the machine will prompt that no
machine is recognized and automatically shut down after 5S. To restart the
machine, press and hold the Start button to start it.

Camera
Screen
Screen: 4.3-inch HD Display
Screen resolution(Pixels): 480x272
Support probe resolution(Pixels): 1.0 Megapixel HD
Snapshot resolution(Pixel): 1920x1080
Video Recording resolution(Pixel): 1280x720
Port：Micro charging port, TF memory card slot
5.5mm/7.0mm 7.0mm 7.9mm
Double lensSingle lens Three lens
1.0 Megapixel HD
70°70° 78°
6 adjustable
brightness LED
lamps
6 + 1 adjustable
brightness LED
lamps
6 + 1 +1adjustable
brightness LED lamps
20-50mm 20-60mm
30-100mm 30-100mm 30-100mm
15-30mm
Auxiliary lighting
A Camera
B Camera
C Camera
Focus
Range
Diameter
Resolving power
Angle
Others
Operating Temperature: 32°F to 113°F (0°C to 45°C)
Power Source: 2000 mAh Lithium Battery
Max battery life: 2.5-3
hours
Charging time: 3
hours
Packaging
Monitor, Micro charging cable, user manual
Accessories: pick up hook, magnet,
mirror(Only the camera of single lenses with a side-view mirror)