Anzzi SD-AZFL06001 Series User manual
A
®
3
®
PRODU REGIION*
CUT ALONG
T
Product Registration Card
Need help? For technical support call 305-614-4070 or visit us at
1
INSLLION GUIDE
WARNING
ols Required
' �
(/
05/16"
I
Philips Tape
Level Drill (8mm) Knife
Screwdriver
100%
Silicone
Sealant
Pencil
measure
1
Rubber
mallet
Drill bit
Safety
Glass Stud finder
2
Left-hand door installation shown
Right-hand door installation shown
DIMENSIONS
34"[864mm�
74"[18
80mm]
4
5
PARTS
@i -■ C C
C C
ASSEMB
2]
GLASS THICKNESS: 10mm / 3/8"
NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PROFESSIONAL.
&TENTION
e To avoid personal injury or property damage, identify components and read all instructions before installing.
6
INSTALLATION STEPS
Wall Jamb[03]
Wall Jamb[03]
°
Wall Jamb[03]
Wall Plugs [01]
Wall Plugs[01].
Wall Plugs
[01]
LEVEL
-FLOOR
MARK THE HOLES ON
THE WALL
Fig 1
7
Step 3
1. Replace the Wall Jamb[03]. Tighten the
screws by the allen key.
Step 4
1. Position the Bottom Rail [06] on the floor,
perpendicular to the Wall Jamb[03]. Both Wall
Jamb[03] and Bottom Rail [06] have a 45 ° angle
to ensure a perfect connection. Make sure their
edges match. Measure the distance from each
end of Bottom Rail [06] to the back wall to be
sure the bottom rail is straight. They should be
the same.
2.Using a pencil, mark location of all four screw
holes for Bottom Rail [06] (Fig 4).
Fig 3
3
Fig4
8
3
Fig 5
3
Fig 6
9
Step 7
1. Clean the with rubbing
alcohol. Install the to the
The top end of the
should meet the top of the glass.
The bottom end should leave a gap of 10mm
from the bottom of the glass.
Step 8
1. Install the to the
5
Fig 7
3
Fig 8
10
Step 9
1. Install the into the
by placing the corner of the bottom
of the fixed panel inside the outside edge
of the Then install the rest
of the into the
!The Tsunami Guard coated side of
the glass panel should face into the shower while
the uncoated side faces out of the shower.The
Fixed Panel[S]has a sticker(s) indicating which side
should face in and out.
Step 10
1. Once the is sitting in the
you may still have to push
the into the
to complete installation. Make sure the
is completely in the
3
3
5
Fig 9
5
Fig 10
11
Step 11
1. Apply a good quality Silicone Sealant on
the Wall Jamb[03] and Bottom Rail [06]
along the bottom profile and wall profiles
(Fig 11).
3 5
'8\ I/
-24 hours -
/ I \
Fig 11
12
Care & Maintenance
13
®
Table of contents
Other Anzzi Bathroom Fixture manuals
Anzzi
Anzzi PLAINS SP-AZ051 User manual
Anzzi
Anzzi SP-AZ016 User manual
Anzzi
Anzzi EDAN SP-AZ024 User manual
Anzzi
Anzzi ENVO TL-AZEB101B User manual
Anzzi
Anzzi SB-AZ009WC User manual
Anzzi
Anzzi MESA SP-AZ043 User manual
Anzzi
Anzzi Melody SP-AZ018 User manual
Anzzi
Anzzi LLANO SP-AZ044 User manual
Anzzi
Anzzi Rhaus SP-AZ029 User manual
Anzzi
Anzzi AC-AZSR55 Series User manual
Anzzi
Anzzi LLANO SP-AZ045 User manual
Anzzi
Anzzi Swan SP-AZ033 User manual
Anzzi
Anzzi SD-AZ052-01 Series User manual
Anzzi
Anzzi Mezzo Series User manual
Anzzi
Anzzi SP-AZ8105 User manual
Anzzi
Anzzi DELTA SP-AZ054 User manual
Anzzi
Anzzi Visor SP-AZ035 User manual
Anzzi
Anzzi PURE SP-AZ021 User manual
Anzzi
Anzzi Vega SP-AZ053 User manual
Anzzi
Anzzi TRYNN SP-AZ025 User manual
Popular Bathroom Fixture manuals by other brands
Jacuzzi
Jacuzzi SPRAY GUARD installation instructions
antoniolupi
antoniolupi INTRECCIO installation manual
HappyOrNot
HappyOrNot Smiley Wall Assembly guide
Devon & Devon
Devon & Devon Savoy K Assembly instructions
WimTec
WimTec OCEAN P10 Assembly and operating instructions
Hans Grohe
Hans Grohe AXOR Citterio 39620000 Instructions for use/assembly instructions
Gessi
Gessi RETTANGOLO 26609 Bath Mixing Program
Kebo
Kebo SH-PN-7142 manual
Peerless Faucet
Peerless Faucet Core PTT188743 quick start guide
DUSCHY
DUSCHY 523n-70 installation manual
Fantini Rubinetti
Fantini Rubinetti Venezia 3429000001 Care and maintenance
Hans Grohe
Hans Grohe Rainfinity 130 3jet 26864700 Assembly instructions