Anzzi CS-CTRTP00M User manual

DON’T WAIT!
REGISTER NOW!
Register your product within 90 days to ensure your product is
recognized as an official purchase and is eligible for warranty
coverage.
Mail in the completed registry card (Pg. 2) or register online
at www.swcorp.com/register .
CS-FRGLPNL01MB
Item: CS-CTRTP00MB
CONSOLE SINK
INSTALL & OPERATION MANUAL
V1.0

Have questions? Call us at or visit us at 1-844-44-ANZZI www.ANZZI.com
PRODUCT REGISTRATION∗
IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS
FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED.
To ensure that your warranty is registered and confirmed please do one of the following:
1. Register online at www.swcorp.com/register. You will be asked to fill out the same
information you would in the registration card. Registering online is fast, secure and
ensures we receive your information.
2. Complete, cut-out and mail the registration card below.By returning this registration
card we confirm the date of purchase for your new product. This confirmation will allow
us to process any warranty claims.
Mail the card to: 5701 NW 35 Avenue, Miami, FL 33142
Product Registration Card
Name
..................................................................................... Address ...........................................................................................................................
City ............................................... State ........................... Zip ..............................
Phone ........................................... Email ........................... .........................................
Date of Purchase ...........................
Installer’s Name ..................................................................... Phone ................................................................................
I have read the Owner’s Manual carefully and understand and agree that any installation, operation or maintenance of the product must be
done strictly in accordance with instructions and guidelines contained in the owner’s manual and installation guide.
Signature____________________________________________________________Date ______________________________________________
CUT ALONG
DOTTED LINE.

Overall Dimensions 48"Lx22"Wx34"H
Basin Dimensions
Water Depth
Φ16 1/2"
4 3/8"
Drain Hole 1 3/4"
Faucet Type 1 3/8"(single hole)
A
B
1pcs
1pcs
C 1pcs
D 2pcs E 16pcs
F 3pcs G 3pcs
H 1pcs
48" [1219mm]
22" [559mm]
5 7/8" [148mm]
34" [864mm]
47 7/8" [1215mm]
28 1/4" [716mm]
10" [254mm]
21 7/8" [557mm]
1"x1" tube
level screw

AC
D
H
E
B
F
G
drilling holes Φ3/8"(8mm) Section 4Section 3
Section 2Section 1
NOTE: Silicone adhesive and tools necessary for installation are NOT included.
1.Place the stand upright in the desired location and level using the
height adjusters built into the bottom of the legs.
2.Use a pencil and the pre-drilled holes in the stand frame to mark
location of mounting hardware on wall.
3.Drill holes for mounting hardware in the wall.
4.Insert anchors into the holes and secure the stand to
the wall with the screws.
5.Apply silicone adhesive to the frame of the lower shelf and then
place the glass plate on the frame.
1.Place Part A of the frame on a section of floor that's covered
with cardboard or a towel to prevent scratching.
2.Use the screws to connect Part C and Part D to Part A. Do not
tighten the screws at this time.
1.Connect Part B to Parts C and D. Tighten all screws for all
parts.
2.If the gaps at the connections are too big, loosen the screws,
adjust the connections and tighten again.
1.Apply a thin coat of silicone adhesive to the back of the sink
where it meets the wall.
2.Apply a thin coat of silicone adhesive to the stand's
top frame where the sink will rest.
3.Carefully place the sink on the top frame of the stand and
center it.
4.Allow silicone adhesive to dry for 24 hours.

Care and Maintenance
Removing stains and fixing scratches or cuts
Although all of our solid surface stone countertops are solid and non-porous, they still can be stained,
scratched, or cut during use. And because the man-made stone countertop is solid all the way through,
it is easy to renew to its original appearance by the following steps.
Identify the extent of the damage, if it is minor damage, try to repair it with an abrasive cleanser or com-
mon household degreaser.
Mild soapy water or ammonia-based detergents can remove most dirt and stains.
If the above steps are unfeasible, follow the polishing steps below:
a. Matte white finish:
•Clean the countertop surface with clear water to ensure no dust remains.
•Use 600 sandpaper to polish the damaged surface with water in moderate pressure until the damage
is gone and the countertop surface is smooth.
•Rinse the countertop surface with clear water. Wipe completely dry with a clean cloth.
b. Matte grey finish:
•Clean the countertop surface with clear water to ensure no dust remains.
•Use 1200 sandpaper to polish the damaged surface with water in moderate pressure until the dama-
ge is gone, then use 1200 scouring pad dipping with water to repeat polishing in circles until the counte-
rtop surface is smooth.
•Rinse the countertop surface with clear water. Wipe completely dry with a clean cloth.
Attentions
•Pay attention to spills and wipe them up immediately. Hard water deposits can ruin the shine on the c-
ountertop.
•Do not put the high-temperature object directly on the manmade stone countertop. Excessive heat ca-
n cause a thermal shock, which may crack the countertop.
•Never stand or sit on the stone countertop. Small fissures in the stone may cause cracks if subjected
to excessive weight.