Anzzi SP-AZ016 User manual

INSTALL GUIDE
Model#
SP-AZ016
RITE
PERFECTION IS OUR TRADITION™
v2.0516

Parts List Pg. 1
Before You Start Pg. 2
Spec Drawing Pg. 3
Installation Pg. 4
Care & Maintenance Pg. 10
Warranty Pg. 11
Registration Final Page
TABLE OF CONTENTS
YOUR REVIEWS MATTER!
For more information please call 1-844-44-ANZZI
or email us at [email protected]
The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI
product for years to come! In the meantime let us know about your experience? We would love
to hear your thoughts from the packaging to the quality and function of the product.
Leave a review on www.ANZZI.com/reviews and let everyone know how satisfied you are with
ANZZI!
Also, we humbly request submitting as many pictures as possible along with your review.
Millions of shoppers will want to know about your experience with our products. Don’t just tell
but show, too!

PERFECTION IS OUR TRADITION™
pg. 1
1. Shower Head
2. Body Jets
3. Diverter
4. Mixer
5. Hand Shower
1
4
2
2
3
5
1
10
7
11
13
17 18
19
20
16
12
15
9
8
14
234
5
6
21
23
22
24
25
26
27
29
30
28
31
32
Component no.
Component
Material
1
top part
glass
2
nut 1
bras s
3
clip
s/s
4
screw
s/s
5
shim
s/s
6
nut 2
s/s
7
backside body
8
connector
bras s
9
flange
ABS
10
front body
glass
11
top shower part
s/s
12
body jets 1
bras s
13
knob
zinc
14
washer 2
rubber
15
cartridge
ABS
16
body jets fastener
ABS
17
handle
zinc
18
handle plate cover
bras s
19
cap
ABS
20
thermostatic cartridge
ABS
21
nut 3
bras s
22
two way joint
ABS
23
body jets 2
ABS
24
function diverter
bras s
25
thermostatic cartridge
bras s
26
hand shower
ABS
27
hand shower hlolder
ABS
28
pvc hose
PVC
29
braided hose 1
s/s
30
braided hose 2
s/s
31
flexible hose
s/s
32
one way joint
ABS
ASME A112.18.1/CSA B125.1

PERFECTION IS OUR TRADITION™
pg. 2
For any questions or concerns contact
our dedicated technical support team
at 1-844-44-ANZZI.
BEFORE YOU START
Screwdriver Channel Locks
Adjustable Wrench Allen key
Goggles
Teflon tape
Recommended Items
ATTENTION: Please read all instructions thoroughly
including all warnings, attentions and notes before
beginning installation.

PERFECTION IS OUR TRADITION™
pg. 3
SPEC
DRAWING
RITE
SP-AZ016
Perfection is our Tradition™
Material:Tempered Glass
Finish: Dark Wood Style
Handles: 2
Jets: 28
Shower: 6.89” x 6.89“
Sprayer: 60” reach
Weight: 30.42 lbs
Height: 59.37”
Supply: 1/2” connections
Flow: 1.8 gpm
Features
Heavy Rain™ Fixed Showerhead
Acu-Stream™ high pressure body jets
Euro-Grip™ hand held sprayer
Rhino Alloy™ certified materials
18.11”
9.84”
59.37”

Figure A
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 4
Before drilling any holes for the shower panel brackets, ensure there are no hidden cables or
pipelines aligned with the desired drilling position.
Drill the two holes for the top bracket 1” apart at the desired height.
Drill the two holes for the bottom bracket 1” apart at approximately 45” below the top bracket.
IMPORTANT
Step A
Step A.2
Ø 6mm Drill
1 INCH

Figure B
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 5
Insert the wall anchors into the pre-drilled holes as shown in Figure B.
Place the shower panel brackets aligned with the drilled holes and using a Philips screw-
driver ighten the screws to secure the brackets.
Step B
Step C
Figure C

Figure 1
PERFECTION IS OUR TRADITION™
pg. 6
Line up the shower wand holder to the pre-drilled holes and insert the provided screws.
Secure the screws by tighting the nuts on the opposite side of the panel wall.
Install the water supply hose for the shower wand onto the holder, as shown.
Make sure all O-rings are inserted to prevent leakage.
Once the shower panel is fully installed and hung on the bracket, you can install the shower
wand hose to the holder connection.
Step 1A
Step 1B
Step 1C
Step 1D
BA
C

Figure 2
INSTALLATION (HANDSHOWER)
PERFECTION IS OUR TRADITION™
pg. 7
Finally, install the shower wand to the hose, as shown.Step 2A
Standard
Hand
Shower
3 Setting
Hand
Shower
or

Figure 3
INSTALLATION (SHOWER HEAD)
PERFECTION IS OUR TRADITION™
pg. 8
Place and align the top shower panel with the pre-drilled holes on the top side of the wall
mounted panel.
Using the screws and washers provided, secure the top panel with the wall mounted panel.
Add Teflon tape and install the shower head to the top panel, as shown.
Step 3A
Step 3B
Step 3C