Apogee Mini-Me User manual

ApogeeApogeeConnnects : MiniMe - MiniDac - Digidesign MBox
Hardware Connections
Mic Input
(WE-XX-5.0)
Analog Outs
(WE-XX-5.0)
Hardware Settings
Set for
desired gain
Set for desired
sample rate
(up to 48kHz)
S/PDIF CX
Software Settings
After making all the hardware connections, open Pro Tools
software. Under Setups select Hardware Setup.
In the Hardware Setup page, set Clock Source to S/PDIF,
and set Ch. 1-2 Input Source to S/PDIF.
As configured above, Pro Tools software inputs are routed
from the Mini-Me’s hardware inputs, and Pro Tools software
ouputs are routed to both the MiniDAC’s and MBox’s
hardware outputs. Also, note that the MiniMe’s DIR-USB
and MON knobs are not used.
S/PDIF
WE-RR-1.0
S/PDIF
WE-RR-1.0