APW Wyott Cooker / Warmer Merchandising Systems CWM-2A User manual

PRODUCT: QUANTITY: ITEM #: Models: CWM-2A CWM-2V CWM-2SP
Designed Smart
Built Solid
Cooker / Warmer
Merchandising Systems
APW Wyott Foodservice Equipment Company · 729 ThirdAve., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com · [email protected] Rev. 5/22/2005
Model: CWM-2A Cooker Warmer Merchanding System
Built to Last
• Heavy-duty stainless steel construction for long life.
• Steel “element support” stabilizes heating elements and
reflects heat toward food.
Reliability backed by APW Wyott’s Warranty
• AllAPW Wyott warmers are backed by a 1 year enhanced
warranty service, which replaces new units with certain
product issues through the convenience of direct overnight
shipments from the factory.
• Certified by the following agencies:
See reverse side for product specifications.
Merchandising Systems!
• Smooth stainless steel front, sides, and back allow decal
signs to be applied for merchandising.
• Designed to cook and hold pre-cooked foods from frozen state.
• Perfect for soups, brats, chilis, and other dishes that need a
quick thaw during the cooking cycles and a gentle warming
heat for serving.
• CWM model has unique “serpentine shaped” heating
elements that evenly distribute heat throughout the unit.
• Provided with insulation to protect interior parts and
countertops from heat build-up. *inserts and lids
not included on
CWM-2A
Model: CWM-2SP
APW Wyott Design Features
• All CWM versions are made with attractive stainless steel
panels that have smooth surfaces.
• Designed for wet usage 100°F to 212°F (38°C to 100°C)
• BiMet thermostatic control
• Pilot light
• Side handles
CWM-2A CWM-2V
• Drain and side drain spicket • No Drain
CWM-2SP
• Drain and side drain spicket
• Two 7 quart insets
• Two hinged lids with clips
• Two 8 oz. ladles
• Adaptor plate with two holes for 7 quart insets

Cooker / Warmer
Merchandising Systems
PRODUCT: QUANTITY: ITEM #: Models: CWM-2A CWM-2V CWM-2SP
APW Wyott Foodservice Equipment Company · 729 ThirdAve., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [email protected] Rev. 5/22/2005
#1507
Cooker Warmer Countertop Systems (CWM) are constructed of stainless steel material around the exterior base and
deep drawn stainless steel for the food well. Side handles are provided. Unit will be heated with a 1500 sepentine
shaped heating element. Heat control shall be a Bi-Met thermostatic control. Each unit should have a 6 ft. long power
cord and one inch rubber legs. Units with drains include a side drain spicket for easy removal of water in well. Units are
UL listed, UL Sanitation, and ULC listed.
PRODUCT SPECIFICATIONS
Construction:
Stainless steel exterior and interior, chrome plated side
handles, 1” bottom insulation, 1” rubber legs. Drain versions
have chrome plated drain spicket.
Electrical Information:
Each unit is equipped with a 60”, three wire grounded
power cord which terminates with a standard three pronged
male plug. The 120V unit uses a NEMA5-15P plug.
Electrical Specifications:
CWM (all) 120V, 1500W, 12.5 Amps
Capacity:
CWM 2A/2V 22 qt. (holds one 12x20 pan or
three 1/3 size pans.
CWM 2SP Holds two 7 qt. insets
Overall Dimensions:
CWM (all) 11.26”H x 14.5”W x 22.5”D
(28.6cm x 36.83cm x 57.15cm)
Shipping:
CWM-2A 29 lbs. (13.15 kg)
CWM-2V 29 lbs. (13.15 kg)
CWM-2SP 34 lbs. (15.42 kg)
FOB: Dallas, TX 75226
Consultant Specifications
*APW Wyott reserves the right to modify specifications
or discontinue models without incurring obligation.
22.500
11.262
3.916
11.805
24.959
14.500